[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 6/7] virtio-net: Add new RX filter controls
From: |
Michael S. Tsirkin |
Subject: |
Re: [Qemu-devel] [PATCH 6/7] virtio-net: Add new RX filter controls |
Date: |
Sat, 6 Jun 2009 23:48:45 +0300 |
User-agent: |
Mutt/1.5.18 (2008-05-17) |
On Fri, Jun 05, 2009 at 02:47:18PM -0600, Alex Williamson wrote:
> Add a few new RX modes to better control the receive_filter. These
> are all fairly obvious features that hardware could provide.
Could you add a bit more detail on motivation for these
features please?
>
> Signed-off-by: Alex Williamson <address@hidden>
> ---
>
> hw/virtio-net.c | 40 ++++++++++++++++++++++++++++++++++++----
> hw/virtio-net.h | 14 ++++++++++----
> 2 files changed, 46 insertions(+), 8 deletions(-)
>
> diff --git a/hw/virtio-net.c b/hw/virtio-net.c
> index 5239cc0..ecb58de 100644
> --- a/hw/virtio-net.c
> +++ b/hw/virtio-net.c
> @@ -16,7 +16,7 @@
> #include "qemu-timer.h"
> #include "virtio-net.h"
>
> -#define VIRTIO_NET_VM_VERSION 9
> +#define VIRTIO_NET_VM_VERSION 10
>
> #define MAC_TABLE_ENTRIES 32
> #define MAX_VLAN (1 << 12) /* Per 802.1Q definition */
> @@ -35,6 +35,10 @@ typedef struct VirtIONet
> int mergeable_rx_bufs;
> uint8_t promisc;
> uint8_t allmulti;
> + uint8_t alluni;
> + uint8_t nomulti;
> + uint8_t nouni;
> + uint8_t nobcast;
> struct {
> int in_use;
> int first_multi;
> @@ -98,6 +102,10 @@ static void virtio_net_reset(VirtIODevice *vdev)
> /* Reset back to compatibility mode */
> n->promisc = 1;
> n->allmulti = 0;
> + n->alluni = 0;
> + n->nomulti = 0;
> + n->nouni = 0;
> + n->nobcast = 0;
>
> /* Flush any MAC and VLAN filter table state */
> n->mac_table.in_use = 0;
> @@ -114,7 +122,8 @@ static uint32_t virtio_net_get_features(VirtIODevice
> *vdev)
> (1 << VIRTIO_NET_F_STATUS) |
> (1 << VIRTIO_NET_F_CTRL_VQ) |
> (1 << VIRTIO_NET_F_CTRL_RX) |
> - (1 << VIRTIO_NET_F_CTRL_VLAN);
> + (1 << VIRTIO_NET_F_CTRL_VLAN) |
> + (1 << VIRTIO_NET_F_CTRL_RX_EXTRA);
>
> return features;
> }
> @@ -157,6 +166,14 @@ static int virtio_net_handle_rx_mode(VirtIONet *n,
> uint8_t cmd,
> n->promisc = on;
> else if (cmd == VIRTIO_NET_CTRL_RX_MODE_ALLMULTI)
> n->allmulti = on;
> + else if (cmd == VIRTIO_NET_CTRL_RX_MODE_ALLUNI)
> + n->alluni = on;
> + else if (cmd == VIRTIO_NET_CTRL_RX_MODE_NOMULTI)
> + n->nomulti = on;
> + else if (cmd == VIRTIO_NET_CTRL_RX_MODE_NOUNI)
> + n->nouni = on;
> + else if (cmd == VIRTIO_NET_CTRL_RX_MODE_NOBCAST)
> + n->nobcast = on;
> else
> return VIRTIO_NET_ERR;
>
> @@ -357,7 +374,9 @@ static int receive_filter(VirtIONet *n, const uint8_t
> *buf, int size)
>
> if (ptr[0] & 1) { // multicast
> if (!memcmp(ptr, bcast, sizeof(bcast))) {
> - return 1;
> + return !n->nobcast;
> + } else if (n->nomulti) {
> + return 0;
> } else if (n->allmulti || n->mac_table.multi_overflow) {
> return 1;
> }
> @@ -368,7 +387,9 @@ static int receive_filter(VirtIONet *n, const uint8_t
> *buf, int size)
> }
> }
> } else { // unicast
> - if (n->mac_table.uni_overflow) {
> + if (n->nouni) {
> + return 0;
> + } else if (n->alluni || n->mac_table.uni_overflow) {
> return 1;
> } else if (!memcmp(ptr, n->mac, ETH_ALEN)) {
> return 1;
> @@ -549,6 +570,10 @@ static void virtio_net_save(QEMUFile *f, void *opaque)
> qemu_put_be32(f, 0); /* vnet-hdr placeholder */
> qemu_put_byte(f, n->mac_table.multi_overflow);
> qemu_put_byte(f, n->mac_table.uni_overflow);
> + qemu_put_byte(f, n->alluni);
> + qemu_put_byte(f, n->nomulti);
> + qemu_put_byte(f, n->nouni);
> + qemu_put_byte(f, n->nobcast);
> }
>
> static int virtio_net_load(QEMUFile *f, void *opaque, int version_id)
> @@ -605,6 +630,13 @@ static int virtio_net_load(QEMUFile *f, void *opaque,
> int version_id)
> n->mac_table.uni_overflow = qemu_get_byte(f);
> }
>
> + if (version_id >= 10) {
> + n->alluni = qemu_get_byte(f);
> + n->nomulti = qemu_get_byte(f);
> + n->nouni = qemu_get_byte(f);
> + n->nobcast = qemu_get_byte(f);
> + }
> +
> /* Find the first multicast entry in the saved MAC filter */
> for (i = 0; i < n->mac_table.in_use; i++) {
> if (n->mac_table.macs[i * ETH_ALEN] & 1) {
> diff --git a/hw/virtio-net.h b/hw/virtio-net.h
> index 390fe10..2085181 100644
> --- a/hw/virtio-net.h
> +++ b/hw/virtio-net.h
> @@ -43,6 +43,7 @@
> #define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */
> #define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */
> #define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */
> +#define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */
>
> #define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
>
> @@ -103,14 +104,19 @@ typedef uint8_t virtio_net_ctrl_ack;
> #define VIRTIO_NET_ERR 1
>
> /*
> - * Control the RX mode, ie. promisucous and allmulti. PROMISC and
> - * ALLMULTI commands require an "out" sg entry containing a 1 byte
> - * state value, zero = disable, non-zero = enable. These commands
> - * are supported with the VIRTIO_NET_F_CTRL_RX feature.
> + * Control the RX mode, ie. promisucous, allmulti, etc...
> + * All commands require an "out" sg entry containing a 1 byte
> + * state value, zero = disable, non-zero = enable. Commands
> + * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
> + * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
> */
> #define VIRTIO_NET_CTRL_RX_MODE 0
> #define VIRTIO_NET_CTRL_RX_MODE_PROMISC 0
> #define VIRTIO_NET_CTRL_RX_MODE_ALLMULTI 1
> + #define VIRTIO_NET_CTRL_RX_MODE_ALLUNI 2
> + #define VIRTIO_NET_CTRL_RX_MODE_NOMULTI 3
> + #define VIRTIO_NET_CTRL_RX_MODE_NOUNI 4
> + #define VIRTIO_NET_CTRL_RX_MODE_NOBCAST 5
>
> /*
> * Control the MAC filter table.
>
>
--
MST
- [Qemu-devel] [PATCH 0/7] virtio-net: Filter cleanup/improvements, Alex Williamson, 2009/06/05
- [Qemu-devel] [PATCH 1/7] virtio-net: Add version_id 7 placeholder for vnet header support, Alex Williamson, 2009/06/05
- [Qemu-devel] [PATCH 2/7] virtio-net: Use a byte to store RX mode flags, Alex Williamson, 2009/06/05
- [Qemu-devel] [PATCH 3/7] virtio-net: reorganize receive_filter(), Alex Williamson, 2009/06/05
- [Qemu-devel] [PATCH 4/7] virtio-net: Fix MAC filter overflow handling, Alex Williamson, 2009/06/05
- [Qemu-devel] [PATCH 6/7] virtio-net: Add new RX filter controls, Alex Williamson, 2009/06/05
- Re: [Qemu-devel] [PATCH 6/7] virtio-net: Add new RX filter controls,
Michael S. Tsirkin <=
- Re: [Qemu-devel] [PATCH 6/7] virtio-net: Add new RX filter controls, Alex Williamson, 2009/06/08
- Re: [Qemu-devel] [PATCH 6/7] virtio-net: Add new RX filter controls, Anthony Liguori, 2009/06/08
- Re: [Qemu-devel] [PATCH 6/7] virtio-net: Add new RX filter controls, Daniel P. Berrange, 2009/06/08
- Re: [Qemu-devel] [PATCH 6/7] virtio-net: Add new RX filter controls, Anthony Liguori, 2009/06/08
- Re: [Qemu-devel] [PATCH 6/7] virtio-net: Add new RX filter controls, Daniel P. Berrange, 2009/06/09
- Re: [Qemu-devel] [PATCH 6/7] virtio-net: Add new RX filter controls, Jamie Lokier, 2009/06/09
- [Qemu-devel] Re: [PATCH 6/7] virtio-net: Add new RX filter controls, Jan Kiszka, 2009/06/09
- [Qemu-devel] Re: [PATCH 6/7] virtio-net: Add new RX filter controls, Jamie Lokier, 2009/06/09
- [Qemu-devel] Re: [PATCH 6/7] virtio-net: Add new RX filter controls, Michael S. Tsirkin, 2009/06/10
- [Qemu-devel] Re: [PATCH 6/7] virtio-net: Add new RX filter controls, Jan Kiszka, 2009/06/10