qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH 06/18] acpi.c: split acpi.c into the common part and


From: Isaku Yamahata
Subject: [Qemu-devel] [PATCH 06/18] acpi.c: split acpi.c into the common part and the piix4 part.
Date: Thu, 18 Jun 2009 19:57:05 +0900

Split acpi.c into the common part and the piix4 specific part.
The common part will be used later.

Signed-off-by: Isaku Yamahata <address@hidden>
---
 Makefile.target             |    4 +-
 hw/acpi.c                   |  556 +------------------------------------------
 hw/{acpi.c => acpi_piix4.c} |  202 +----------------
 3 files changed, 5 insertions(+), 757 deletions(-)
 copy hw/{acpi.c => acpi_piix4.c} (73%)

diff --git a/Makefile.target b/Makefile.target
index 1ab708b..2cf55b9 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -573,7 +573,7 @@ ifeq ($(TARGET_BASE_ARCH), i386)
 OBJS+= ide.o pckbd.o vga.o $(SOUND_HW) dma.o
 OBJS+= fdc.o mc146818rtc.o serial.o i8259.o i8254.o pcspk.o pc.o
 OBJS+= cirrus_vga.o apic.o ioapic.o parallel.o acpi.o piix_pci.o
-OBJS+= pc_smbus.o pc_apm.o
+OBJS+= acpi_piix4.o pc_smbus.o pc_apm.o
 OBJS+= usb-uhci.o vmmouse.o vmport.o vmware_vga.o hpet.o
 OBJS += device-hotplug.o pci-hotplug.o smbios.o
 CPPFLAGS += -DHAS_AUDIO -DHAS_AUDIO_CHOICE
@@ -609,7 +609,7 @@ OBJS+= mips_r4k.o mips_jazz.o mips_malta.o mips_mipssim.o
 OBJS+= mips_timer.o mips_int.o dma.o vga.o serial.o i8254.o i8259.o rc4030.o
 OBJS+= g364fb.o jazz_led.o dp8393x.o
 OBJS+= ide.o gt64xxx.o pckbd.o fdc.o mc146818rtc.o usb-uhci.o acpi.o ds1225y.o
-OBJS+= pc_smbus.o pc_apm.o
+OBJS+= acpi_piix4.o pc_smbus.o pc_apm.o
 OBJS+= piix_pci.o parallel.o cirrus_vga.o pcspk.o $(SOUND_HW)
 OBJS+= mipsnet.o
 OBJS+= pflash_cfi01.o
diff --git a/hw/acpi.c b/hw/acpi.c
index 4d0690e..19f5df0 100644
--- a/hw/acpi.c
+++ b/hw/acpi.c
@@ -18,374 +18,9 @@
  */
 #include "hw.h"
 #include "pc.h"
-#include "pc_apm.h"
-#include "pc_smbus.h"
 #include "pci.h"
-#include "qemu-timer.h"
 #include "sysemu.h"
-#include "i2c.h"
-#include "smbus.h"
-#include "kvm.h"
-
-//#define DEBUG
-
-#define ACPI_DBG_IO_ADDR  0xb044
-
-typedef struct PIIX4PMState {
-    PCIDevice dev;
-    uint16_t pmsts;
-    uint16_t pmen;
-    uint16_t pmcntrl;
-
-    APMState apm;
-
-    QEMUTimer *tmr_timer;
-    int64_t tmr_overflow_time;
-
-    PCSMBus smb;
-
-    qemu_irq irq;
-} PIIX4PMState;
-
-#define ACPI_ENABLE 0xf1
-#define ACPI_DISABLE 0xf0
-
-static PIIX4PMState *pm_state;
-
-static uint32_t get_pmtmr(PIIX4PMState *s)
-{
-    uint32_t d;
-    d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY, ticks_per_sec);
-    return d & 0xffffff;
-}
-
-static int get_pmsts(PIIX4PMState *s)
-{
-    int64_t d;
-    int pmsts;
-    pmsts = s->pmsts;
-    d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY, ticks_per_sec);
-    if (d >= s->tmr_overflow_time)
-        s->pmsts |= ACPI_BITMASK_TIMER_STATUS;
-    return s->pmsts;
-}
-
-static void pm_update_sci(PIIX4PMState *s)
-{
-    int sci_level, pmsts;
-    int64_t expire_time;
-
-    pmsts = get_pmsts(s);
-    sci_level = (((pmsts & s->pmen) &
-                  (ACPI_BITMASK_RT_CLOCK_ENABLE |
-                   ACPI_BITMASK_POWER_BUTTON_ENABLE |
-                   ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
-                   ACPI_BITMASK_TIMER_ENABLE)) != 0);
-    qemu_set_irq(s->irq, sci_level);
-    /* schedule a timer interruption if needed */
-    if ((s->pmen & ACPI_BITMASK_TIMER_ENABLE) &&
-        !(pmsts & ACPI_BITMASK_TIMER_STATUS)) {
-        expire_time = muldiv64(s->tmr_overflow_time, ticks_per_sec,
-                               PM_TIMER_FREQUENCY);
-        qemu_mod_timer(s->tmr_timer, expire_time);
-    } else {
-        qemu_del_timer(s->tmr_timer);
-    }
-}
-
-static void pm_tmr_timer(void *opaque)
-{
-    PIIX4PMState *s = opaque;
-    pm_update_sci(s);
-}
-
-static void pm_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
-{
-    PIIX4PMState *s = opaque;
-    addr &= 0x3f;
-    switch(addr) {
-    case 0x00:
-        {
-            int64_t d;
-            int pmsts;
-            pmsts = get_pmsts(s);
-            if (pmsts & val & ACPI_BITMASK_TIMER_STATUS) {
-                /* if TMRSTS is reset, then compute the new overflow time */
-                d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY,
-                             ticks_per_sec);
-                s->tmr_overflow_time = (d + 0x800000LL) & ~0x7fffffLL;
-            }
-            s->pmsts &= ~val;
-            pm_update_sci(s);
-        }
-        break;
-    case 0x02:
-        s->pmen = val;
-        pm_update_sci(s);
-        break;
-    case 0x04:
-        {
-            int sus_typ;
-            s->pmcntrl = val & ~(ACPI_BITMASK_SLEEP_ENABLE);
-            if (val & ACPI_BITMASK_SLEEP_ENABLE) {
-                /* change suspend type */
-                sus_typ = (val >> 10) & 7;
-                switch(sus_typ) {
-                case 0: /* soft power off */
-                    qemu_system_shutdown_request();
-                    break;
-                case 1:
-                    /* ACPI_BITMASK_WAKE_STATUS should be set on resume.
-                       Pretend that resume was caused by power button */
-                    s->pmsts |= (ACPI_BITMASK_WAKE_STATUS |
-                                 ACPI_BITMASK_POWER_BUTTON_STATUS);
-                    qemu_system_reset_request();
-#if defined(TARGET_I386)
-                    cmos_set_s3_resume();
-#endif
-                default:
-                    break;
-                }
-            }
-        }
-        break;
-    default:
-        break;
-    }
-#ifdef DEBUG
-    printf("PM writew port=0x%04x val=0x%04x\n", addr, val);
-#endif
-}
-
-static uint32_t pm_ioport_readw(void *opaque, uint32_t addr)
-{
-    PIIX4PMState *s = opaque;
-    uint32_t val;
-
-    addr &= 0x3f;
-    switch(addr) {
-    case 0x00:
-        val = get_pmsts(s);
-        break;
-    case 0x02:
-        val = s->pmen;
-        break;
-    case 0x04:
-        val = s->pmcntrl;
-        break;
-    default:
-        val = 0;
-        break;
-    }
-#ifdef DEBUG
-    printf("PM readw port=0x%04x val=0x%04x\n", addr, val);
-#endif
-    return val;
-}
-
-static void pm_ioport_writel(void *opaque, uint32_t addr, uint32_t val)
-{
-    //    PIIX4PMState *s = opaque;
-    addr &= 0x3f;
-#ifdef DEBUG
-    printf("PM writel port=0x%04x val=0x%08x\n", addr, val);
-#endif
-}
-
-static uint32_t pm_ioport_readl(void *opaque, uint32_t addr)
-{
-    PIIX4PMState *s = opaque;
-    uint32_t val;
-
-    addr &= 0x3f;
-    switch(addr) {
-    case 0x08:
-        val = get_pmtmr(s);
-        break;
-    default:
-        val = 0;
-        break;
-    }
-#ifdef DEBUG
-    printf("PM readl port=0x%04x val=0x%08x\n", addr, val);
-#endif
-    return val;
-}
-
-static void apm_ctrl_changed(uint32_t val, void *arg)
-{
-    PIIX4PMState *s = arg;
-
-    /* ACPI specs 3.0, 4.7.2.5 */
-    if (val == ACPI_ENABLE) {
-        s->pmcntrl |= ACPI_BITMASK_SCI_ENABLE;
-    } else if (val == ACPI_DISABLE) {
-        s->pmcntrl &= ~ACPI_BITMASK_SCI_ENABLE;
-    }
-
-    if (s->dev.config[0x5b] & (1 << 1)) {
-        cpu_interrupt(first_cpu, CPU_INTERRUPT_SMI);
-    }
-}
-
-static void acpi_dbg_writel(void *opaque, uint32_t addr, uint32_t val)
-{
-#if defined(DEBUG)
-    printf("ACPI: DBG: 0x%08x\n", val);
-#endif
-}
-
-static void pm_io_space_update(PIIX4PMState *s)
-{
-    uint32_t pm_io_base;
-
-    if (s->dev.config[0x80] & 1) {
-        pm_io_base = le32_to_cpu(*(uint32_t *)(s->dev.config + 0x40));
-        pm_io_base &= 0xffc0;
-
-        /* XXX: need to improve memory and ioport allocation */
-#if defined(DEBUG)
-        printf("PM: mapping to 0x%x\n", pm_io_base);
-#endif
-        register_ioport_write(pm_io_base, 64, 2, pm_ioport_writew, s);
-        register_ioport_read(pm_io_base, 64, 2, pm_ioport_readw, s);
-        register_ioport_write(pm_io_base, 64, 4, pm_ioport_writel, s);
-        register_ioport_read(pm_io_base, 64, 4, pm_ioport_readl, s);
-    }
-}
-
-static void pm_write_config(PCIDevice *d,
-                            uint32_t address, uint32_t val, int len)
-{
-    pci_default_write_config(d, address, val, len);
-    if (address == 0x80)
-        pm_io_space_update((PIIX4PMState *)d);
-}
-
-static void pm_save(QEMUFile* f,void *opaque)
-{
-    PIIX4PMState *s = opaque;
-
-    pci_device_save(&s->dev, f);
-
-    qemu_put_be16s(f, &s->pmsts);
-    qemu_put_be16s(f, &s->pmen);
-    qemu_put_be16s(f, &s->pmcntrl);
-    apm_save(f, &s->apm);
-    qemu_put_timer(f, s->tmr_timer);
-    qemu_put_be64(f, s->tmr_overflow_time);
-}
-
-static int pm_load(QEMUFile* f,void* opaque,int version_id)
-{
-    PIIX4PMState *s = opaque;
-    int ret;
-
-    if (version_id > 1)
-        return -EINVAL;
-
-    ret = pci_device_load(&s->dev, f);
-    if (ret < 0)
-        return ret;
-
-    qemu_get_be16s(f, &s->pmsts);
-    qemu_get_be16s(f, &s->pmen);
-    qemu_get_be16s(f, &s->pmcntrl);
-    apm_load(f, &s->apm);
-    qemu_get_timer(f, s->tmr_timer);
-    s->tmr_overflow_time=qemu_get_be64(f);
-
-    pm_io_space_update(s);
-
-    return 0;
-}
-
-static void piix4_reset(void *opaque)
-{
-    PIIX4PMState *s = opaque;
-    uint8_t *pci_conf = s->dev.config;
-
-    pci_conf[0x58] = 0;
-    pci_conf[0x59] = 0;
-    pci_conf[0x5a] = 0;
-    pci_conf[0x5b] = 0;
-
-    if (kvm_enabled()) {
-        /* Mark SMM as already inited (until KVM supports SMM). */
-        pci_conf[0x5B] = 0x02;
-    }
-}
-
-#if defined(TARGET_I386)
-static void piix4_pm_powerdown(void *arg)
-{
-    PIIX4PMState *pm_state = (PIIX4PMState*) arg;
-
-    if (pm_state->pmen & ACPI_BITMASK_POWER_BUTTON_ENABLE) {
-        pm_state->pmsts |= ACPI_BITMASK_POWER_BUTTON_STATUS;
-        pm_update_sci(pm_state);
-    }
-}
-#endif
-
-i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
-                       qemu_irq sci_irq)
-{
-    PIIX4PMState *s;
-    uint8_t *pci_conf;
-
-    s = (PIIX4PMState *)pci_register_device(bus,
-                                         "PM", sizeof(PIIX4PMState),
-                                         devfn, NULL, pm_write_config);
-    pm_state = s;
-    pci_conf = s->dev.config;
-    pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_INTEL);
-    pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82371AB_3);
-    pci_conf[0x06] = 0x80;
-    pci_conf[0x07] = 0x02;
-    pci_conf[0x08] = 0x03; // revision number
-    pci_conf[0x09] = 0x00;
-    pci_config_set_class(pci_conf, PCI_CLASS_BRIDGE_OTHER);
-    pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
-    pci_conf[0x3d] = 0x01; // interrupt pin 1
-
-    pci_conf[0x40] = 0x01; /* PM io base read only bit */
-
-    /* APM */
-    apm_init(&s->apm, apm_ctrl_changed, s);
-
-    register_ioport_write(ACPI_DBG_IO_ADDR, 4, 4, acpi_dbg_writel, s);
-
-    if (kvm_enabled()) {
-        /* Mark SMM as already inited to prevent SMM from running.  KVM does 
not
-         * support SMM mode. */
-        pci_conf[0x5B] = 0x02;
-    }
-
-    /* XXX: which specification is used ? The i82731AB has different
-       mappings */
-    pci_conf[0x5f] = (parallel_hds[0] != NULL ? 0x80 : 0) | 0x10;
-    pci_conf[0x63] = 0x60;
-    pci_conf[0x67] = (serial_hds[0] != NULL ? 0x08 : 0) |
-       (serial_hds[1] != NULL ? 0x90 : 0);
-
-    pci_conf[0x90] = smb_io_base | 1;
-    pci_conf[0x91] = smb_io_base >> 8;
-    pci_conf[0xd2] = 0x09;
-    register_ioport_write(smb_io_base, 64, 1, smb_ioport_writeb, &s->smb);
-    register_ioport_read(smb_io_base, 64, 1, smb_ioport_readb, &s->smb);
-
-    s->tmr_timer = qemu_new_timer(vm_clock, pm_tmr_timer, s);
-
-    register_savevm("piix4_pm", 0, 1, pm_save, pm_load, s);
-
-    pc_smbus_init(&s->smb);
-    s->irq = sci_irq;
-    qemu_register_reset(piix4_reset, 0, s);
-    qemu_system_powerdown_register(piix4_pm_powerdown, pm_state);
-
-    return s->smb.smbus;
-}
+#include "acpi.h"
 
 #if defined(TARGET_I386)
 static qemu_powerdown_t qemu_powerdown_callback;
@@ -407,195 +42,6 @@ void qemu_system_powerdown(void)
 }
 #endif
 
-#define GPE_BASE 0xafe0
-#define PCI_BASE 0xae00
-#define PCI_EJ_BASE 0xae08
-
-struct gpe_regs {
-    uint16_t sts; /* status */
-    uint16_t en;  /* enabled */
-};
-
-struct pci_status {
-    uint32_t up;
-    uint32_t down;
-};
-
-static struct gpe_regs gpe;
-static struct pci_status pci0_status;
-
-static uint32_t gpe_read_val(uint16_t val, uint32_t addr)
-{
-    if (addr & 1)
-        return (val >> 8) & 0xff;
-    return val & 0xff;
-}
-
-static uint32_t gpe_readb(void *opaque, uint32_t addr)
-{
-    uint32_t val = 0;
-    struct gpe_regs *g = opaque;
-    switch (addr) {
-        case GPE_BASE:
-        case GPE_BASE + 1:
-            val = gpe_read_val(g->sts, addr);
-            break;
-        case GPE_BASE + 2:
-        case GPE_BASE + 3:
-            val = gpe_read_val(g->en, addr);
-            break;
-        default:
-            break;
-    }
-
-#if defined(DEBUG)
-    printf("gpe read %x == %x\n", addr, val);
-#endif
-    return val;
-}
-
-static void gpe_write_val(uint16_t *cur, int addr, uint32_t val)
-{
-    if (addr & 1)
-        *cur = (*cur & 0xff) | (val << 8);
-    else
-        *cur = (*cur & 0xff00) | (val & 0xff);
-}
-
-static void gpe_reset_val(uint16_t *cur, int addr, uint32_t val)
-{
-    uint16_t x1, x0 = val & 0xff;
-    int shift = (addr & 1) ? 8 : 0;
-
-    x1 = (*cur >> shift) & 0xff;
-
-    x1 = x1 & ~x0;
-
-    *cur = (*cur & (0xff << (8 - shift))) | (x1 << shift);
-}
-
-static void gpe_writeb(void *opaque, uint32_t addr, uint32_t val)
-{
-    struct gpe_regs *g = opaque;
-    switch (addr) {
-        case GPE_BASE:
-        case GPE_BASE + 1:
-            gpe_reset_val(&g->sts, addr, val);
-            break;
-        case GPE_BASE + 2:
-        case GPE_BASE + 3:
-            gpe_write_val(&g->en, addr, val);
-            break;
-        default:
-            break;
-   }
-
-#if defined(DEBUG)
-    printf("gpe write %x <== %d\n", addr, val);
-#endif
-}
-
-static uint32_t pcihotplug_read(void *opaque, uint32_t addr)
-{
-    uint32_t val = 0;
-    struct pci_status *g = opaque;
-    switch (addr) {
-        case PCI_BASE:
-            val = g->up;
-            break;
-        case PCI_BASE + 4:
-            val = g->down;
-            break;
-        default:
-            break;
-    }
-
-#if defined(DEBUG)
-    printf("pcihotplug read %x == %x\n", addr, val);
-#endif
-    return val;
-}
-
-static void pcihotplug_write(void *opaque, uint32_t addr, uint32_t val)
-{
-    struct pci_status *g = opaque;
-    switch (addr) {
-        case PCI_BASE:
-            g->up = val;
-            break;
-        case PCI_BASE + 4:
-            g->down = val;
-            break;
-   }
-
-#if defined(DEBUG)
-    printf("pcihotplug write %x <== %d\n", addr, val);
-#endif
-}
-
-static uint32_t pciej_read(void *opaque, uint32_t addr)
-{
-#if defined(DEBUG)
-    printf("pciej read %x\n", addr);
-#endif
-    return 0;
-}
-
-static void pciej_write(void *opaque, uint32_t addr, uint32_t val)
-{
-#if defined (TARGET_I386)
-    int slot = ffs(val) - 1;
-
-    pci_device_hot_remove_success(0, slot);
-#endif
-
-#if defined(DEBUG)
-    printf("pciej write %x <== %d\n", addr, val);
-#endif
-}
-
-static void piix4_device_hot_add(int bus, int slot, int state);
-
-void piix4_acpi_system_hot_add_init(void)
-{
-    register_ioport_write(GPE_BASE, 4, 1, gpe_writeb, &gpe);
-    register_ioport_read(GPE_BASE, 4, 1,  gpe_readb, &gpe);
-
-    register_ioport_write(PCI_BASE, 8, 4, pcihotplug_write, &pci0_status);
-    register_ioport_read(PCI_BASE, 8, 4,  pcihotplug_read, &pci0_status);
-
-    register_ioport_write(PCI_EJ_BASE, 4, 4, pciej_write, NULL);
-    register_ioport_read(PCI_EJ_BASE, 4, 4,  pciej_read, NULL);
-
-    qemu_system_device_hot_add_register(piix4_device_hot_add);
-}
-
-static void enable_device(struct pci_status *p, struct gpe_regs *g, int slot)
-{
-    g->sts |= 2;
-    p->up |= (1 << slot);
-}
-
-static void disable_device(struct pci_status *p, struct gpe_regs *g, int slot)
-{
-    g->sts |= 2;
-    p->down |= (1 << slot);
-}
-
-static void piix4_device_hot_add(int bus, int slot, int state)
-{
-    pci0_status.up = 0;
-    pci0_status.down = 0;
-    if (state)
-        enable_device(&pci0_status, &gpe, slot);
-    else
-        disable_device(&pci0_status, &gpe, slot);
-    if (gpe.en & 2) {
-        qemu_set_irq(pm_state->irq, 1);
-        qemu_set_irq(pm_state->irq, 0);
-    }
-}
-
 static qemu_system_device_hot_add_t device_hot_add_callback;
 void qemu_system_device_hot_add_register(qemu_system_device_hot_add_t callback)
 {
diff --git a/hw/acpi.c b/hw/acpi_piix4.c
similarity index 73%
copy from hw/acpi.c
copy to hw/acpi_piix4.c
index 4d0690e..0f6f656 100644
--- a/hw/acpi.c
+++ b/hw/acpi_piix4.c
@@ -26,6 +26,7 @@
 #include "i2c.h"
 #include "smbus.h"
 #include "kvm.h"
+#include "acpi.h"
 
 //#define DEBUG
 
@@ -254,6 +255,7 @@ static void pm_io_space_update(PIIX4PMState *s)
     }
 }
 
+
 static void pm_write_config(PCIDevice *d,
                             uint32_t address, uint32_t val, int len)
 {
@@ -387,25 +389,6 @@ i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t 
smb_io_base,
     return s->smb.smbus;
 }
 
-#if defined(TARGET_I386)
-static qemu_powerdown_t qemu_powerdown_callback;
-static void *qemu_powerdown_arg;
-
-void qemu_system_powerdown_register(qemu_powerdown_t callback, void *arg)
-{
-    qemu_powerdown_callback = callback;
-    qemu_powerdown_arg = arg;
-}
-
-void qemu_system_powerdown(void)
-{
-    if (!qemu_powerdown_callback) {
-        qemu_system_shutdown_request();
-    } else {
-        qemu_powerdown_callback(qemu_powerdown_arg);
-    }
-}
-#endif
 
 #define GPE_BASE 0xafe0
 #define PCI_BASE 0xae00
@@ -595,184 +578,3 @@ static void piix4_device_hot_add(int bus, int slot, int 
state)
         qemu_set_irq(pm_state->irq, 0);
     }
 }
-
-static qemu_system_device_hot_add_t device_hot_add_callback;
-void qemu_system_device_hot_add_register(qemu_system_device_hot_add_t callback)
-{
-    device_hot_add_callback = callback;
-}
-
-void qemu_system_device_hot_add(int pcibus, int slot, int state)
-{
-    if (device_hot_add_callback)
-        device_hot_add_callback(pcibus, slot, state);
-}
-
-struct acpi_table_header
-{
-    char signature [4];    /* ACPI signature (4 ASCII characters) */
-    uint32_t length;          /* Length of table, in bytes, including header */
-    uint8_t revision;         /* ACPI Specification minor version # */
-    uint8_t checksum;         /* To make sum of entire table == 0 */
-    char oem_id [6];       /* OEM identification */
-    char oem_table_id [8]; /* OEM table identification */
-    uint32_t oem_revision;    /* OEM revision number */
-    char asl_compiler_id [4]; /* ASL compiler vendor ID */
-    uint32_t asl_compiler_revision; /* ASL compiler revision number */
-} __attribute__((packed));
-
-char *acpi_tables;
-size_t acpi_tables_len;
-
-static int acpi_checksum(const uint8_t *data, int len)
-{
-    int sum, i;
-    sum = 0;
-    for(i = 0; i < len; i++)
-        sum += data[i];
-    return (-sum) & 0xff;
-}
-
-int acpi_table_add(const char *t)
-{
-    static const char *dfl_id = "QEMUQEMU";
-    char buf[1024], *p, *f;
-    struct acpi_table_header acpi_hdr;
-    unsigned long val;
-    size_t off;
-
-    memset(&acpi_hdr, 0, sizeof(acpi_hdr));
-  
-    if (get_param_value(buf, sizeof(buf), "sig", t)) {
-        strncpy(acpi_hdr.signature, buf, 4);
-    } else {
-        strncpy(acpi_hdr.signature, dfl_id, 4);
-    }
-    if (get_param_value(buf, sizeof(buf), "rev", t)) {
-        val = strtoul(buf, &p, 10);
-        if (val > 255 || *p != '\0')
-            goto out;
-    } else {
-        val = 1;
-    }
-    acpi_hdr.revision = (int8_t)val;
-
-    if (get_param_value(buf, sizeof(buf), "oem_id", t)) {
-        strncpy(acpi_hdr.oem_id, buf, 6);
-    } else {
-        strncpy(acpi_hdr.oem_id, dfl_id, 6);
-    }
-
-    if (get_param_value(buf, sizeof(buf), "oem_table_id", t)) {
-        strncpy(acpi_hdr.oem_table_id, buf, 8);
-    } else {
-        strncpy(acpi_hdr.oem_table_id, dfl_id, 8);
-    }
-
-    if (get_param_value(buf, sizeof(buf), "oem_rev", t)) {
-        val = strtol(buf, &p, 10);
-        if(*p != '\0')
-            goto out;
-    } else {
-        val = 1;
-    }
-    acpi_hdr.oem_revision = cpu_to_le32(val);
-
-    if (get_param_value(buf, sizeof(buf), "asl_compiler_id", t)) {
-        strncpy(acpi_hdr.asl_compiler_id, buf, 4);
-    } else {
-        strncpy(acpi_hdr.asl_compiler_id, dfl_id, 4);
-    }
-
-    if (get_param_value(buf, sizeof(buf), "asl_compiler_rev", t)) {
-        val = strtol(buf, &p, 10);
-        if(*p != '\0')
-            goto out;
-    } else {
-        val = 1;
-    }
-    acpi_hdr.asl_compiler_revision = cpu_to_le32(val);
-    
-    if (!get_param_value(buf, sizeof(buf), "data", t)) {
-         buf[0] = '\0';
-    }
-
-    acpi_hdr.length = sizeof(acpi_hdr);
-
-    f = buf;
-    while (buf[0]) {
-        struct stat s;
-        char *n = strchr(f, ':');
-        if (n)
-            *n = '\0';
-        if(stat(f, &s) < 0) {
-            fprintf(stderr, "Can't stat file '%s': %s\n", f, strerror(errno));
-            goto out;
-        }
-        acpi_hdr.length += s.st_size;
-        if (!n)
-            break;
-        *n = ':';
-        f = n + 1;
-    }
-
-    if (!acpi_tables) {
-        acpi_tables_len = sizeof(uint16_t);
-        acpi_tables = qemu_mallocz(acpi_tables_len);
-    }
-    p = acpi_tables + acpi_tables_len;
-    acpi_tables_len += sizeof(uint16_t) + acpi_hdr.length;
-    acpi_tables = qemu_realloc(acpi_tables, acpi_tables_len);
-
-    acpi_hdr.length = cpu_to_le32(acpi_hdr.length);
-    *(uint16_t*)p = acpi_hdr.length;
-    p += sizeof(uint16_t);
-    memcpy(p, &acpi_hdr, sizeof(acpi_hdr));
-    off = sizeof(acpi_hdr);
-
-    f = buf;
-    while (buf[0]) {
-        struct stat s;
-        int fd;
-        char *n = strchr(f, ':');
-        if (n)
-            *n = '\0';
-        fd = open(f, O_RDONLY);
-
-        if(fd < 0)
-            goto out;
-        if(fstat(fd, &s) < 0) {
-            close(fd);
-            goto out;
-        }
-
-        do {
-            int r;
-            r = read(fd, p + off, s.st_size);
-            if (r > 0) {
-                off += r;
-                s.st_size -= r;
-            } else if ((r < 0 && errno != EINTR) || r == 0) {
-                close(fd);
-                goto out;
-            }
-        } while(s.st_size);
-
-        close(fd);
-        if (!n)
-            break;
-        f = n + 1;
-    }
-
-    ((struct acpi_table_header*)p)->checksum = acpi_checksum((uint8_t*)p, off);
-    /* increase number of tables */
-    (*(uint16_t*)acpi_tables) =
-           cpu_to_le32(le32_to_cpu(*(uint16_t*)acpi_tables) + 1);
-    return 0;
-out:
-    if (acpi_tables) {
-        free(acpi_tables);
-        acpi_tables = NULL;
-    }
-    return -1;
-}
-- 
1.6.0.2





reply via email to

[Prev in Thread] Current Thread [Next in Thread]