Thanks
Vinod
----------------------------------------------------------------------
Message: 1
Date: Mon, 4 Jun 2012 18:57:02 +0900
From: Isaku Yamahata<address@hidden>
To: address@hidden, address@hidden
Cc: address@hidden, address@hidden, address@hidden,
address@hidden, address@hidden, address@hidden,
address@hidden, address@hidden, address@hidden,
address@hidden, address@hidden, address@hidden,
address@hidden
Subject: [Qemu-devel] [PATCH v2 00/41] postcopy live migration
Message-ID:<address@hidden>
After the long time, we have v2. This is qemu part.
The linux kernel part is sent separatedly.
Changes v1 -> v2:
- split up patches for review
- buffered file refactored
- many bug fixes
Espcially PV drivers can work with postcopy
- optimization/heuristic
Patches
1 - 30: refactoring exsiting code and preparation
31 - 37: implement postcopy itself (essential part)
38 - 41: some optimization/heuristic for postcopy
Intro
=====
This patch series implements postcopy live migration.[1]
As discussed at KVM forum 2011, dedicated character device is used for
distributed shared memory between migration source and destination.
Now we can discuss/benchmark/compare with precopy. I believe there are
much rooms for improvement.
[1] http://wiki.qemu.org/Features/PostCopyLiveMigration
Usage
=====
You need load umem character device on the host before starting migration.
Postcopy can be used for tcg and kvm accelarator. The implementation depend
on only linux umem character device. But the driver dependent code is split
into a file.
I tested only host page size == guest page size case, but the implementation
allows host page size != guest page size case.
The following options are added with this patch series.
- incoming part
command line options
-postcopy [-postcopy-flags<flags>]
where flags is for changing behavior for benchmark/debugging
Currently the following flags are available
0: default
1: enable touching page request
example:
qemu -postcopy -incoming tcp:0:4444 -monitor stdio -machine accel=kvm
- outging part
options for migrate command
migrate [-p [-n] [-m]] URI [<prefault forward> [<prefault backword>]]
-p: indicate postcopy migration
-n: disable background transferring pages: This is for benchmark/debugging
-m: move background transfer of postcopy mode
<prefault forward>: The number of forward pages which is sent with on-demand
<prefault backward>: The number of backward pages which is sent with
on-demand
example:
migrate -p -n tcp:<dest ip address>:4444
migrate -p -n -m tcp:<dest ip address>:4444 32 0
TODO
====
- benchmark/evaluation. Especially how async page fault affects the result.
- improve/optimization
At the moment at least what I'm aware of is
- making incoming socket non-blocking with thread
As page compression is comming, it is impractical to non-blocking read
and check if the necessary data is read.
- touching pages in incoming qemu process by fd handler seems suboptimal.
creating dedicated thread?
- outgoing handler seems suboptimal causing latency.
- consider on FUSE/CUSE possibility
- don't fork umemd, but create thread?
basic postcopy work flow
========================
qemu on the destination
|
V
open(/dev/umem)
|
V
UMEM_INIT
|
V
Here we have two file descriptors to
umem device and shmem file
|
| umemd
| daemon on the destination
|
V create pipe to communicate
fork()---------------------------------------,
| |
V |
close(socket) V
close(shmem) mmap(shmem file)
| |
V V
mmap(umem device) for guest RAM close(shmem file)
| |
close(umem device) |
| |
V |
wait for ready from daemon<----pipe-----send ready message
| |
| Here the daemon takes over
send ok------------pipe---------------> the owner of the socket
| to the source
V |
entering post copy stage |
start guest execution |
| |
V V
access guest RAM read() to get faulted pages
| |
V V
page fault ------------------------------>page offset is returned
block |
V
pull page from the source
write the page contents
to the shmem.
|
V
unblock<-----------------------------write() to tell served pages
the fault handler returns the page
page fault is resolved
|
| pages can be sent
| backgroundly
| |
| V
| write()
| |
V V
The specified pages<-----pipe------------request to touch pages
are made present by |
touching guest RAM. |
| |
V V
reply-------------pipe-------------> release the cached page
| madvise(MADV_REMOVE)
| |
V V
all the pages are pulled from the source
| |
V V
the vma becomes anonymous<----------------UMEM_MAKE_VMA_ANONYMOUS
(note: I'm not sure if this can be implemented or not)
| |
V V
migration completes exit()
Isaku Yamahata (41):
arch_init: export sort_ram_list() and ram_save_block()
arch_init: export RAM_SAVE_xxx flags for postcopy
arch_init/ram_save: introduce constant for ram save version = 4
arch_init: refactor host_from_stream_offset()
arch_init/ram_save_live: factor out RAM_SAVE_FLAG_MEM_SIZE case
arch_init: refactor ram_save_block()
arch_init/ram_save_live: factor out ram_save_limit
arch_init/ram_load: refactor ram_load
arch_init: introduce helper function to find ram block with id string
arch_init: simplify a bit by ram_find_block()
arch_init: factor out counting transferred bytes
arch_init: factor out setting last_block, last_offset
exec.c: factor out qemu_get_ram_ptr()
exec.c: export last_ram_offset()
savevm: export qemu_peek_buffer, qemu_peek_byte, qemu_file_skip
savevm: qemu_pending_size() to return pending buffered size
savevm, buffered_file: introduce method to drain buffer of buffered
file
QEMUFile: add qemu_file_fd() for later use
savevm/QEMUFile: drop qemu_stdio_fd
savevm/QEMUFileSocket: drop duplicated member fd
savevm: rename QEMUFileSocket to QEMUFileFD, socket_close to fd_close
savevm/QEMUFile: introduce qemu_fopen_fd
migration.c: remove redundant line in migrate_init()
migration: export migrate_fd_completed() and migrate_fd_cleanup()
migration: factor out parameters into MigrationParams
buffered_file: factor out buffer management logic
buffered_file: Introduce QEMUFileNonblock for nonblock write
buffered_file: add qemu_file to read/write to buffer in memory
umem.h: import Linux umem.h
update-linux-headers.sh: teach umem.h to update-linux-headers.sh
configure: add CONFIG_POSTCOPY option
savevm: add new section that is used by postcopy
postcopy: introduce -postcopy and -postcopy-flags option
postcopy outgoing: add -p and -n option to migrate command
postcopy: introduce helper functions for postcopy
postcopy: implement incoming part of postcopy live migration
postcopy: implement outgoing part of postcopy live migration
postcopy/outgoing: add forward, backward option to specify the size
of prefault
postcopy/outgoing: implement prefault
migrate: add -m (movebg) option to migrate command
migration/postcopy: add movebg mode
Makefile.target | 5 +
arch_init.c | 298 ++++---
arch_init.h | 20 +
block-migration.c | 8 +-
buffered_file.c | 322 ++++++--
buffered_file.h | 32 +
configure | 12 +
cpu-all.h | 9 +
exec-obsolete.h | 1 +
exec.c | 87 ++-
hmp-commands.hx | 18 +-
hmp.c | 10 +-
linux-headers/linux/umem.h | 42 +
migration-exec.c | 12 +-
migration-fd.c | 25 +-
migration-postcopy-stub.c | 77 ++
migration-postcopy.c | 1771 +++++++++++++++++++++++++++++++++++++++
migration-tcp.c | 25 +-
migration-unix.c | 26 +-
migration.c | 97 ++-
migration.h | 47 +-
qapi-schema.json | 4 +-
qemu-common.h | 2 +
qemu-file.h | 8 +-
qemu-options.hx | 25 +
qmp-commands.hx | 4 +-
savevm.c | 177 ++++-
scripts/update-linux-headers.sh | 2 +-
sysemu.h | 4 +-
umem.c | 364 ++++++++
umem.h | 101 +++
vl.c | 16 +-
vmstate.h | 2 +-
33 files changed, 3373 insertions(+), 280 deletions(-)
create mode 100644 linux-headers/linux/umem.h
create mode 100644 migration-postcopy-stub.c
create mode 100644 migration-postcopy.c
create mode 100644 umem.c
create mode 100644 umem.h
------------------------------