[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v2 7/8] rdma: introduce MIG_STATE_NONE and change MI
From: |
mrhines |
Subject: |
[Qemu-devel] [PATCH v2 7/8] rdma: introduce MIG_STATE_NONE and change MIG_STATE_SETUP state transition |
Date: |
Fri, 28 Jun 2013 16:00:02 -0400 |
From: "Michael R. Hines" <address@hidden>
As described in the previous patch, until now, the MIG_STATE_SETUP
state was not really a 'formal' state. It has been used as a 'zero' state
(what we're calling 'NONE' here) and QEMU has been unconditionally transitioning
into this state when the QMP migration command was called. Instead we want to
introduce MIG_STATE_NONE, which is our starting state in the state machine, and
then immediately transition into the MIG_STATE_SETUP state when the QMP migrate
command is issued.
In order to do this, we must delay the transition into MIG_STATE_ACTIVE until
later in the migration_thread(). This is done to be able to timestamp the
amount of
time spent in the SETUP state for proper accounting to the user during
an RDMA migration.
Furthermore, the management software, until now, has never been aware of the
existence of the SETUP state whatsoever. This must change, because, timing of
this
state implies that the state actually exists.
These two patches cannot be separated because the 'query_migrate' QMP
switch statement needs to know how to handle this new state transition.
Reviewed-by: Juan Quintela <address@hidden>
Tested-by: Michael R. Hines <address@hidden>
Signed-off-by: Michael R. Hines <address@hidden>
---
migration.c | 21 ++++++++++++++-------
1 file changed, 14 insertions(+), 7 deletions(-)
diff --git a/migration.c b/migration.c
index cbfdb2c..a199a67 100644
--- a/migration.c
+++ b/migration.c
@@ -36,7 +36,8 @@
#endif
enum {
- MIG_STATE_ERROR,
+ MIG_STATE_ERROR = -1,
+ MIG_STATE_NONE,
MIG_STATE_SETUP,
MIG_STATE_CANCELLED,
MIG_STATE_ACTIVE,
@@ -63,7 +64,7 @@ static NotifierList migration_state_notifiers =
MigrationState *migrate_get_current(void)
{
static MigrationState current_migration = {
- .state = MIG_STATE_SETUP,
+ .state = MIG_STATE_NONE,
.bandwidth_limit = MAX_THROTTLE,
.xbzrle_cache_size = DEFAULT_MIGRATE_CACHE_SIZE,
.mbps = -1,
@@ -184,9 +185,13 @@ MigrationInfo *qmp_query_migrate(Error **errp)
MigrationState *s = migrate_get_current();
switch (s->state) {
- case MIG_STATE_SETUP:
+ case MIG_STATE_NONE:
/* no migration has happened ever */
break;
+ case MIG_STATE_SETUP:
+ info->has_status = true;
+ info->status = g_strdup("setup");
+ break;
case MIG_STATE_ACTIVE:
info->has_status = true;
info->status = g_strdup("active");
@@ -257,7 +262,7 @@ void
qmp_migrate_set_capabilities(MigrationCapabilityStatusList *params,
MigrationState *s = migrate_get_current();
MigrationCapabilityStatusList *cap;
- if (s->state == MIG_STATE_ACTIVE) {
+ if (s->state == MIG_STATE_ACTIVE || s->state == MIG_STATE_SETUP) {
error_set(errp, QERR_MIGRATION_ACTIVE);
return;
}
@@ -393,7 +398,7 @@ void qmp_migrate(const char *uri, bool has_blk, bool blk,
params.blk = blk;
params.shared = inc;
- if (s->state == MIG_STATE_ACTIVE) {
+ if (s->state == MIG_STATE_ACTIVE || s->state == MIG_STATE_SETUP) {
error_set(errp, QERR_MIGRATION_ACTIVE);
return;
}
@@ -525,6 +530,8 @@ static void *migration_thread(void *opaque)
DPRINTF("beginning savevm\n");
qemu_savevm_state_begin(s->file, &s->params);
+ migrate_set_state(s, MIG_STATE_SETUP, MIG_STATE_ACTIVE);
+
while (s->state == MIG_STATE_ACTIVE) {
int64_t current_time;
uint64_t pending_size;
@@ -604,8 +611,8 @@ static void *migration_thread(void *opaque)
void migrate_fd_connect(MigrationState *s)
{
- s->state = MIG_STATE_ACTIVE;
- trace_migrate_set_state(MIG_STATE_ACTIVE);
+ s->state = MIG_STATE_SETUP;
+ trace_migrate_set_state(MIG_STATE_SETUP);
/* This is a best 1st approximation. ns to ms */
s->expected_downtime = max_downtime/1000000;
--
1.7.10.4
- [Qemu-devel] [PATCH v2 0/8] rdma: core logic w/ unpin example, mrhines, 2013/06/28
- [Qemu-devel] [PATCH v2 5/8] rdma: send pc.ram, mrhines, 2013/06/28
- [Qemu-devel] [PATCH v2 6/8] rdma: allow state transitions between other states besides ACTIVE, mrhines, 2013/06/28
- [Qemu-devel] [PATCH v2 2/8] rdma: introduce ram_handle_compressed(), mrhines, 2013/06/28
- [Qemu-devel] [PATCH v2 4/8] rdma: unpin support, mrhines, 2013/06/28
- [Qemu-devel] [PATCH v2 1/8] rdma: update documentation to reflect new unpin support, mrhines, 2013/06/28
- [Qemu-devel] [PATCH v2 8/8] rdma: account for the time spent in MIG_STATE_SETUP through QMP, mrhines, 2013/06/28
- [Qemu-devel] [PATCH v2 3/8] rdma: core logic, mrhines, 2013/06/28
- [Qemu-devel] [PATCH v2 7/8] rdma: introduce MIG_STATE_NONE and change MIG_STATE_SETUP state transition,
mrhines <=
- Re: [Qemu-devel] [PATCH v2 0/8] rdma: core logic w/ unpin example, Michael R. Hines, 2013/06/28