[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v4 8/9] qmp: Add support of "dirty-bitmap" sync mode
From: |
Fam Zheng |
Subject: |
[Qemu-devel] [PATCH v4 8/9] qmp: Add support of "dirty-bitmap" sync mode for drive-backup |
Date: |
Thu, 27 Mar 2014 17:09:47 +0800 |
For "dirty-bitmap" sync mode, the block job will iterate through the
given dirty bitmap to decide if a sector needs backup (backup all the
dirty clusters and skip clean ones), just as allocation conditions of
"top" sync mode.
There are two bitmap use modes for sync=dirty-bitmap:
- reset: backup job makes a copy of bitmap and resets the original
one.
- consume: backup job makes the original anonymous (invisible to user)
and releases it after use.
Signed-off-by: Fam Zheng <address@hidden>
---
block/backup.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++-
block/mirror.c | 4 ++++
blockdev.c | 9 +++++++-
hmp.c | 4 +++-
include/block/block_int.h | 3 +++
qapi-schema.json | 32 ++++++++++++++++++++++++----
qmp-commands.hx | 7 ++++---
7 files changed, 102 insertions(+), 10 deletions(-)
diff --git a/block/backup.c b/block/backup.c
index 15a2e55..24b8d2c 100644
--- a/block/backup.c
+++ b/block/backup.c
@@ -37,6 +37,10 @@ typedef struct CowRequest {
typedef struct BackupBlockJob {
BlockJob common;
BlockDriverState *target;
+ /* bitmap for sync=dirty-bitmap */
+ BdrvDirtyBitmap *sync_bitmap;
+ /* dirty bitmap granularity */
+ int sync_bitmap_gran;
MirrorSyncMode sync_mode;
RateLimit limit;
BlockdevOnError on_source_error;
@@ -263,7 +267,7 @@ static void coroutine_fn backup_run(void *opaque)
job->common.busy = true;
}
} else {
- /* Both FULL and TOP SYNC_MODE's require copying.. */
+ /* FULL, TOP and DIRTY_BITMAP SYNC_MODE's require copying.. */
for (; start < end; start++) {
bool error_is_read;
@@ -317,7 +321,21 @@ static void coroutine_fn backup_run(void *opaque)
if (alloced == 0) {
continue;
}
+ } else if (job->sync_mode == MIRROR_SYNC_MODE_DIRTY_BITMAP) {
+ int i, dirty = 0;
+ for (i = 0; i < BACKUP_SECTORS_PER_CLUSTER;
+ i += job->sync_bitmap_gran) {
+ if (bdrv_get_dirty(bs, job->sync_bitmap,
+ start * BACKUP_SECTORS_PER_CLUSTER + i)) {
+ dirty = 1;
+ break;
+ }
+ }
+ if (!dirty) {
+ continue;
+ }
}
+
/* FULL sync mode we copy the whole drive. */
ret = backup_do_cow(bs, start * BACKUP_SECTORS_PER_CLUSTER,
BACKUP_SECTORS_PER_CLUSTER, &error_is_read);
@@ -341,6 +359,9 @@ static void coroutine_fn backup_run(void *opaque)
qemu_co_rwlock_wrlock(&job->flush_rwlock);
qemu_co_rwlock_unlock(&job->flush_rwlock);
+ if (job->sync_bitmap) {
+ bdrv_release_dirty_bitmap(bs, job->sync_bitmap);
+ }
hbitmap_free(job->bitmap);
bdrv_iostatus_disable(target);
@@ -351,12 +372,15 @@ static void coroutine_fn backup_run(void *opaque)
void backup_start(BlockDriverState *bs, BlockDriverState *target,
int64_t speed, MirrorSyncMode sync_mode,
+ BdrvDirtyBitmap *sync_bitmap,
+ BitmapUseMode bitmap_mode,
BlockdevOnError on_source_error,
BlockdevOnError on_target_error,
BlockDriverCompletionFunc *cb, void *opaque,
Error **errp)
{
int64_t len;
+ BdrvDirtyBitmap *original;
assert(bs);
assert(target);
@@ -369,6 +393,28 @@ void backup_start(BlockDriverState *bs, BlockDriverState
*target,
return;
}
+ if (sync_mode == MIRROR_SYNC_MODE_DIRTY_BITMAP && !sync_bitmap) {
+ error_setg(errp, "must provide a valid bitmap name for
\"dirty-bitmap\""
+ "sync mode");
+ return;
+ }
+
+ if (sync_bitmap) {
+ switch (bitmap_mode) {
+ case BITMAP_USE_MODE_RESET:
+ original = sync_bitmap;
+ sync_bitmap = bdrv_copy_dirty_bitmap(bs, sync_bitmap, NULL);
+ bdrv_reset_dirty_bitmap(bs, original);
+ break;
+ case BITMAP_USE_MODE_CONSUME:
+ bdrv_dirty_bitmap_make_anon(bs, sync_bitmap);
+ break;
+ default:
+ assert(0);
+ }
+ bdrv_disable_dirty_bitmap(bs, sync_bitmap);
+ }
+
len = bdrv_getlength(bs);
if (len < 0) {
error_setg_errno(errp, -len, "unable to get length for '%s'",
@@ -386,6 +432,11 @@ void backup_start(BlockDriverState *bs, BlockDriverState
*target,
job->on_target_error = on_target_error;
job->target = target;
job->sync_mode = sync_mode;
+ job->sync_bitmap = sync_bitmap;
+ if (sync_bitmap) {
+ job->sync_bitmap_gran =
+ bdrv_dirty_bitmap_granularity(bs, job->sync_bitmap);
+ }
job->common.len = len;
job->common.co = qemu_coroutine_create(backup_run);
qemu_coroutine_enter(job->common.co, job);
diff --git a/block/mirror.c b/block/mirror.c
index 9b73cd9..faf7427 100644
--- a/block/mirror.c
+++ b/block/mirror.c
@@ -624,6 +624,10 @@ void mirror_start(BlockDriverState *bs, BlockDriverState
*target,
bool is_none_mode;
BlockDriverState *base;
+ if (mode == MIRROR_SYNC_MODE_DIRTY_BITMAP) {
+ error_setg(errp, "Sync mode 'dirty-bitmap' not supported");
+ return;
+ }
is_none_mode = mode == MIRROR_SYNC_MODE_NONE;
base = mode == MIRROR_SYNC_MODE_TOP ? bs->backing_hd : NULL;
mirror_start_job(bs, target, speed, granularity, buf_size,
diff --git a/blockdev.c b/blockdev.c
index aa3ee55..4120dee 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -1384,6 +1384,8 @@ static void drive_backup_prepare(BlkTransactionState
*common, Error **errp)
backup->sync,
backup->has_mode, backup->mode,
backup->has_speed, backup->speed,
+ backup->has_bitmap, backup->bitmap,
+ backup->has_bitmap_use_mode, backup->bitmap_use_mode,
backup->has_on_source_error, backup->on_source_error,
backup->has_on_target_error, backup->on_target_error,
&local_err);
@@ -2032,6 +2034,8 @@ void qmp_drive_backup(const char *device, const char
*target,
enum MirrorSyncMode sync,
bool has_mode, enum NewImageMode mode,
bool has_speed, int64_t speed,
+ bool has_bitmap, const char *bitmap,
+ bool has_bitmap_use_mode, enum BitmapUseMode bitmap_mode,
bool has_on_source_error, BlockdevOnError
on_source_error,
bool has_on_target_error, BlockdevOnError
on_target_error,
Error **errp)
@@ -2129,7 +2133,10 @@ void qmp_drive_backup(const char *device, const char
*target,
return;
}
- backup_start(bs, target_bs, speed, sync, on_source_error, on_target_error,
+ backup_start(bs, target_bs, speed, sync,
+ has_bitmap ? bdrv_find_dirty_bitmap(bs, bitmap) : NULL,
+ has_bitmap_use_mode ? bitmap_mode : BITMAP_USE_MODE_RESET,
+ on_source_error, on_target_error,
block_job_cb, bs, &local_err);
if (local_err != NULL) {
bdrv_unref(target_bs);
diff --git a/hmp.c b/hmp.c
index 2f279c4..2c84377 100644
--- a/hmp.c
+++ b/hmp.c
@@ -950,7 +950,9 @@ void hmp_drive_backup(Monitor *mon, const QDict *qdict)
qmp_drive_backup(device, filename, !!format, format,
full ? MIRROR_SYNC_MODE_FULL : MIRROR_SYNC_MODE_TOP,
- true, mode, false, 0, false, 0, false, 0, &errp);
+ true, mode, false, 0, false, NULL,
+ false, 0,
+ false, 0, false, 0, &errp);
hmp_handle_error(mon, &errp);
}
diff --git a/include/block/block_int.h b/include/block/block_int.h
index cd5bc73..5f9de10 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -484,6 +484,7 @@ void mirror_start(BlockDriverState *bs, BlockDriverState
*target,
* @target: Block device to write to.
* @speed: The maximum speed, in bytes per second, or 0 for unlimited.
* @sync_mode: What parts of the disk image should be copied to the
destination.
+ * @sync_bitmap: The dirty bitmap if sync_mode is
MIRROR_SYNC_MODE_DIRTY_BITMAP.
* @on_source_error: The action to take upon error reading from the source.
* @on_target_error: The action to take upon error writing to the target.
* @cb: Completion function for the job.
@@ -494,6 +495,8 @@ void mirror_start(BlockDriverState *bs, BlockDriverState
*target,
*/
void backup_start(BlockDriverState *bs, BlockDriverState *target,
int64_t speed, MirrorSyncMode sync_mode,
+ BdrvDirtyBitmap *sync_bitmap,
+ BitmapUseMode bitmap_mode,
BlockdevOnError on_source_error,
BlockdevOnError on_target_error,
BlockDriverCompletionFunc *cb, void *opaque,
diff --git a/qapi-schema.json b/qapi-schema.json
index cf1cc8a..d99041c 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -1529,10 +1529,12 @@
#
# @none: only copy data written from now on
#
+# @dirty-bitmap: only copy dirty data according to the bitmap (Since 2.1)
+#
# Since: 1.3
##
{ 'enum': 'MirrorSyncMode',
- 'data': ['top', 'full', 'none'] }
+ 'data': ['top', 'full', 'none', 'dirty-bitmap'] }
##
# @BlockJobType:
@@ -1908,6 +1910,21 @@
'data': { 'device': 'str', 'name': 'str' } }
##
+# @BitmapUseMode
+#
+# An enumeration that tells QEMU what operation to take when using a bitmap
+# in drive backup sync mode.
+#
+# @consume: QEMU should just consume the bitmap and release it after using
+#
+# @reset: QEMU should reset the dirty bitmap
+#
+# Since: 2.1
+##
+{ 'enum': 'BitmapUseMode',
+ 'data': [ 'consume', 'reset' ] }
+
+##
# @DriveBackup
#
# @device: the name of the device which should be copied.
@@ -1920,14 +1937,20 @@
# probe if @mode is 'existing', else the format of the source
#
# @sync: what parts of the disk image should be copied to the destination
-# (all the disk, only the sectors allocated in the topmost image, or
-# only new I/O).
+# (all the disk, only the sectors allocated in the topmost image, from a
+# dirty bitmap, or only new I/O).
#
# @mode: #optional whether and how QEMU should create a new image, default is
# 'absolute-paths'.
#
# @speed: #optional the maximum speed, in bytes per second
#
+# @bitmap: #optional the name of dirty bitmap if sync is "dirty-bitmap"
+# (Since 2.1)
+#
+# @bitmap-use-mode: #optional which operation to take when consuming @bitmap,
+# default is reset. (Since 2.1)
+#
# @on-source-error: #optional the action to take on an error on the source,
# default 'report'. 'stop' and 'enospc' can only be used
# if the block device supports io-status (see BlockInfo).
@@ -1945,7 +1968,8 @@
{ 'type': 'DriveBackup',
'data': { 'device': 'str', 'target': 'str', '*format': 'str',
'sync': 'MirrorSyncMode', '*mode': 'NewImageMode',
- '*speed': 'int',
+ '*speed': 'int', '*bitmap': 'str',
+ '*bitmap-use-mode': 'BitmapUseMode',
'*on-source-error': 'BlockdevOnError',
'*on-target-error': 'BlockdevOnError' } }
diff --git a/qmp-commands.hx b/qmp-commands.hx
index c7ed39f..420a901 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -1031,7 +1031,7 @@ EQMP
{
.name = "drive-backup",
.args_type = "sync:s,device:B,target:s,speed:i?,mode:s?,format:s?,"
- "on-source-error:s?,on-target-error:s?",
+ "bitmap:s?,on-source-error:s?,on-target-error:s?",
.mhandler.cmd_new = qmp_marshal_input_drive_backup,
},
@@ -1058,8 +1058,9 @@ Arguments:
(json-string, optional)
- "sync": what parts of the disk image should be copied to the destination;
possibilities include "full" for all the disk, "top" for only the sectors
- allocated in the topmost image, or "none" to only replicate new I/O
- (MirrorSyncMode).
+ allocated in the topmost image, "dirty-bitmap" for only the dirty sectors in
+ the bitmap, or "none" to only replicate new I/O (MirrorSyncMode).
+- "bitmap": bitmap name to use for sync==dirty-bitmap
- "mode": whether and how QEMU should create a new image
(NewImageMode, optional, default 'absolute-paths')
- "speed": the maximum speed, in bytes per second (json-int, optional)
--
1.9.1
- [Qemu-devel] [PATCH v4 2/9] qmp: Add dirty-bitmap-add and dirty-bitmap-remove, (continued)
- [Qemu-devel] [PATCH v4 2/9] qmp: Add dirty-bitmap-add and dirty-bitmap-remove, Fam Zheng, 2014/03/27
- [Qemu-devel] [PATCH v4 4/9] block: Introduce bdrv_dirty_bitmap_granularity(), Fam Zheng, 2014/03/27
- [Qemu-devel] [PATCH v4 5/9] hbitmap: Add hbitmap_copy, Fam Zheng, 2014/03/27
- [Qemu-devel] [PATCH v4 6/9] block: Add bdrv_copy_dirty_bitmap and bdrv_reset_dirty_bitmap, Fam Zheng, 2014/03/27
- [Qemu-devel] [PATCH v4 7/9] qmp: Add dirty-bitmap-enable and dirty-bitmap-disable, Fam Zheng, 2014/03/27
- [Qemu-devel] [PATCH v4 8/9] qmp: Add support of "dirty-bitmap" sync mode for drive-backup,
Fam Zheng <=
- [Qemu-devel] [PATCH v4 9/9] qapi: Add transaction support to dirty-bitmap-{add, disable}, Fam Zheng, 2014/03/27
- [Qemu-devel] [PATCH v4 3/9] block: Handle error of bdrv_getlength in bdrv_create_dirty_bitmap, Fam Zheng, 2014/03/27