[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v3 1/4] vl.c: extend -m option to support option
From: |
Igor Mammedov |
Subject: |
Re: [Qemu-devel] [PATCH v3 1/4] vl.c: extend -m option to support options for memory hotplug |
Date: |
Thu, 15 May 2014 15:53:21 +0200 |
On Fri, 09 May 2014 14:35:03 +0200
Christian Borntraeger <address@hidden> wrote:
> On 07/05/14 20:05, Matthew Rosato wrote:
> > From: Igor Mammedov <address@hidden>
> >
> > From: Igor Mammedov <address@hidden>
> >
> > Add following parameters:
> > "slots" - total number of hotplug memory slots
> > "maxmem" - maximum possible memory
> >
> > "slots" and "maxmem" should go in pair and "maxmem" should be greater
> > than "mem" for memory hotplug to be enabled.
> >
> > Signed-off-by: Matthew Rosato <address@hidden>
>
> I would prefer if Igor could resend his latest version and one of the overall
> maintainer applies this as it is not s390-specific.
> What happened to the x86 implementation?
I'm rebasing it on current master and chasing migration bug.
>
> Christian
> > ---
> > include/hw/boards.h | 2 ++
> > qemu-options.hx | 9 ++++++---
> > vl.c | 51
> > +++++++++++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 59 insertions(+), 3 deletions(-)
> >
> > diff --git a/include/hw/boards.h b/include/hw/boards.h
> > index 4345bd0..5b3a903 100644
> > --- a/include/hw/boards.h
> > +++ b/include/hw/boards.h
> > @@ -11,6 +11,8 @@
> > typedef struct QEMUMachineInitArgs {
> > const MachineClass *machine;
> > ram_addr_t ram_size;
> > + ram_addr_t maxram_size;
> > + uint64_t ram_slots;
> > const char *boot_order;
> > const char *kernel_filename;
> > const char *kernel_cmdline;
> > diff --git a/qemu-options.hx b/qemu-options.hx
> > index 781af14..c6411c4 100644
> > --- a/qemu-options.hx
> > +++ b/qemu-options.hx
> > @@ -210,17 +210,20 @@ use is discouraged as it may be removed from future
> > versions.
> > ETEXI
> >
> > DEF("m", HAS_ARG, QEMU_OPTION_m,
> > - "-m [size=]megs\n"
> > + "-m[emory] [size=]megs[,slots=n,maxmem=size]\n"
> > " configure guest RAM\n"
> > " size: initial amount of guest memory (default: "
> > - stringify(DEFAULT_RAM_SIZE) "MiB)\n",
> > + stringify(DEFAULT_RAM_SIZE) "MiB)\n"
> > + " slots: number of hotplug slots (default: none)\n"
> > + " maxmem: maximum amount of guest memory (default:
> > none)\n",
> > QEMU_ARCH_ALL)
> > STEXI
> > @item -m address@hidden
> > @findex -m
> > Set virtual RAM size to @var{megs} megabytes. Default is 128 MiB.
> > Optionally,
> > a suffix of ``M'' or ``G'' can be used to signify a value in megabytes or
> > -gigabytes respectively.
> > +gigabytes respectively. Optional pair @var{slots}, @var{maxmem} could be
> > used
> > +to set amount of hotluggable memory slots and possible maximum amount of
> > memory.
> > ETEXI
> >
> > DEF("mem-path", HAS_ARG, QEMU_OPTION_mempath,
> > diff --git a/vl.c b/vl.c
> > index 73e0661..36ad82c 100644
> > --- a/vl.c
> > +++ b/vl.c
> > @@ -520,6 +520,14 @@ static QemuOptsList qemu_mem_opts = {
> > .name = "size",
> > .type = QEMU_OPT_SIZE,
> > },
> > + {
> > + .name = "slots",
> > + .type = QEMU_OPT_NUMBER,
> > + },
> > + {
> > + .name = "maxmem",
> > + .type = QEMU_OPT_SIZE,
> > + },
> > { /* end of list */ }
> > },
> > };
> > @@ -2988,6 +2996,8 @@ int main(int argc, char **argv, char **envp)
> > const char *trace_file = NULL;
> > const ram_addr_t default_ram_size = (ram_addr_t)DEFAULT_RAM_SIZE *
> > 1024 * 1024;
> > + ram_addr_t maxram_size = default_ram_size;
> > + uint64_t ram_slots = 0;
> >
> > atexit(qemu_run_exit_notifiers);
> > error_set_progname(argv[0]);
> > @@ -3324,6 +3334,7 @@ int main(int argc, char **argv, char **envp)
> > case QEMU_OPTION_m: {
> > uint64_t sz;
> > const char *mem_str;
> > + const char *maxmem_str, *slots_str;
> >
> > opts = qemu_opts_parse(qemu_find_opts("memory"),
> > optarg, 1);
> > @@ -3365,6 +3376,44 @@ int main(int argc, char **argv, char **envp)
> > error_report("ram size too large");
> > exit(EXIT_FAILURE);
> > }
> > +
> > + maxmem_str = qemu_opt_get(opts, "maxmem");
> > + slots_str = qemu_opt_get(opts, "slots");
> > + if (maxmem_str && slots_str) {
> > + uint64_t slots;
> > +
> > + sz = qemu_opt_get_size(opts, "maxmem", 0);
> > + if (sz < ram_size) {
> > + fprintf(stderr, "qemu: invalid -m option value:
> > maxmem "
> > + "(%" PRIu64 ") <= initial memory (%"
> > + PRIu64 ")\n", sz, ram_size);
> > + exit(EXIT_FAILURE);
> > + }
> > +
> > + slots = qemu_opt_get_number(opts, "slots", 0);
> > + if ((sz > ram_size) && !slots) {
> > + fprintf(stderr, "qemu: invalid -m option value:
> > maxmem "
> > + "(%" PRIu64 ") more than initial memory (%"
> > + PRIu64 ") but no hotplug slots where "
> > + "specified\n", sz, ram_size);
> > + exit(EXIT_FAILURE);
> > + }
> > +
> > + if ((sz <= ram_size) && slots) {
> > + fprintf(stderr, "qemu: invalid -m option value: %"
> > + PRIu64 " hotplug slots where specified but
> > "
> > + "maxmem (%" PRIu64 ") <= initial memory (%"
> > + PRIu64 ")\n", slots, sz, ram_size);
> > + exit(EXIT_FAILURE);
> > + }
> > + maxram_size = sz;
> > + ram_slots = slots;
> > + } else if ((!maxmem_str && slots_str) ||
> > + (maxmem_str && !slots_str)) {
> > + fprintf(stderr, "qemu: invalid -m option value:
> > missing "
> > + "'%s' option\n", slots_str ? "maxmem" :
> > "slots");
> > + exit(EXIT_FAILURE);
> > + }
> > break;
> > }
> > #ifdef CONFIG_TPM
> > @@ -4424,6 +4473,8 @@ int main(int argc, char **argv, char **envp)
> > current_machine->init_args = (QEMUMachineInitArgs) {
> > .machine = machine_class,
> > .ram_size = ram_size,
> > + .maxram_size = maxram_size,
> > + .ram_slots = ram_slots,
> > .boot_order = boot_order,
> > .kernel_filename = kernel_filename,
> > .kernel_cmdline = kernel_cmdline,
> >
>
Re: [Qemu-devel] [PATCH v3 0/4] s390: Support for Hotplug of Standby Memory, Christian Borntraeger, 2014/05/12