[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 2/2] e1000: use symbolic constants to init phy ctrl
From: |
Gabriel L. Somlo |
Subject: |
[Qemu-devel] [PATCH 2/2] e1000: use symbolic constants to init phy ctrl & status registers |
Date: |
Wed, 6 Aug 2014 14:07:11 -0400 |
Signed-off-by: Gabriel Somlo <address@hidden>
---
hw/net/e1000.c | 29 +++++++++++++++++++++++------
1 file changed, 23 insertions(+), 6 deletions(-)
diff --git a/hw/net/e1000.c b/hw/net/e1000.c
index 04c0f91..a2c4608 100644
--- a/hw/net/e1000.c
+++ b/hw/net/e1000.c
@@ -233,13 +233,30 @@ static const char phy_regcap[0x20] = {
/* PHY_ID2 documented in 8254x_GBe_SDM.pdf, pp. 250 */
static const uint16_t phy_reg_init[] = {
- [PHY_CTRL] = 0x1140,
- [PHY_STATUS] = 0x794d, /* link initially up with not completed autoneg */
- [PHY_ID1] = 0x141, /* [PHY_ID2] configured per DevId, from e1000_reset() */
- [PHY_1000T_CTRL] = 0x0e00, [M88E1000_PHY_SPEC_CTRL] =
0x360,
- [M88E1000_EXT_PHY_SPEC_CTRL] = 0x0d60, [PHY_AUTONEG_ADV] = 0xde1,
- [PHY_LP_ABILITY] = 0x1e0, [PHY_1000T_STATUS] = 0x3c00,
+ [PHY_CTRL] = MII_CR_SPEED_SELECT_MSB |
+ MII_CR_FULL_DUPLEX |
+ MII_CR_AUTO_NEG_EN,
+
+ [PHY_STATUS] = MII_SR_EXTENDED_CAPS |
+ MII_SR_LINK_STATUS | /* link initially up */
+ MII_SR_AUTONEG_CAPS |
+ /* MII_SR_AUTONEG_COMPLETE: initially NOT completed */
+ MII_SR_PREAMBLE_SUPPRESS |
+ MII_SR_EXTENDED_STATUS |
+ MII_SR_10T_HD_CAPS |
+ MII_SR_10T_FD_CAPS |
+ MII_SR_100X_HD_CAPS |
+ MII_SR_100X_FD_CAPS,
+
+ [PHY_ID1] = 0x141,
+ /* [PHY_ID2] configured per DevId, from e1000_reset() */
+ [PHY_AUTONEG_ADV] = 0xde1,
+ [PHY_LP_ABILITY] = 0x1e0,
+ [PHY_1000T_CTRL] = 0x0e00,
+ [PHY_1000T_STATUS] = 0x3c00,
+ [M88E1000_PHY_SPEC_CTRL] = 0x360,
[M88E1000_PHY_SPEC_STATUS] = 0xac00,
+ [M88E1000_EXT_PHY_SPEC_CTRL] = 0x0d60,
};
static const uint32_t mac_reg_init[] = {
--
1.9.3