[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 05/15] hw/intc/arm_gic: Add Interrupt Group Register
From: |
Fabian Aggeler |
Subject: |
[Qemu-devel] [PATCH 05/15] hw/intc/arm_gic: Add Interrupt Group Registers |
Date: |
Fri, 22 Aug 2014 12:29:42 +0200 |
Interrupt Group Registers (previously called Interrupt Security
Registers) as defined in GICv1 with Security Extensions or GICv2 allow
to configure interrupts as Secure (Group0) or Non-secure (Group1).
In GICv2 these registers are implemented independent of the existence of
Security Extensions.
Signed-off-by: Fabian Aggeler <address@hidden>
---
hw/intc/arm_gic.c | 47 +++++++++++++++++++++++++++++++++++++---
hw/intc/arm_gic_common.c | 1 +
hw/intc/gic_internal.h | 4 ++++
include/hw/intc/arm_gic_common.h | 1 +
4 files changed, 50 insertions(+), 3 deletions(-)
diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c
index 9b83af0..a972942 100644
--- a/hw/intc/arm_gic.c
+++ b/hw/intc/arm_gic.c
@@ -311,8 +311,26 @@ static uint32_t gic_dist_readb(void *opaque, hwaddr offset)
if (offset < 0x08)
return 0;
if (offset >= 0x80) {
- /* Interrupt Security , RAZ/WI */
- return 0;
+ /* Interrupt Group Registers
+ *
+ * For GIC with Security Extn and Non-secure access RAZ/WI
+ * For GICv1 without Security Extn RAZ/WI
+ */
+ res = 0;
+ if (!(s->security_extn && ns_access()) &&
+ ((s->revision == 1 && s->security_extn)
+ || s->revision == 2)) {
+ irq = (offset - 0x080) * 8 + GIC_BASE_IRQ;
+ if (irq >= s->num_irq) {
+ goto bad_reg;
+ }
+ for (i = 0; i < 8; i++) {
+ if (!GIC_TEST_GROUP0(irq + i, cm)) {
+ res |= (1 << i);
+ }
+ }
+ }
+ return res;
}
goto bad_reg;
} else if (offset < 0x200) {
@@ -456,7 +474,30 @@ static void gic_dist_writeb(void *opaque, hwaddr offset,
} else if (offset < 4) {
/* ignored. */
} else if (offset >= 0x80) {
- /* Interrupt Security Registers, RAZ/WI */
+ /* Interrupt Group Registers
+ *
+ * For GIC with Security Extn and Non-secure access RAZ/WI
+ * For GICv1 without Security Extn RAZ/WI
+ */
+ if (!(s->security_extn && ns_access()) &&
+ ((s->revision == 1 && s->security_extn)
+ || s->revision == 2)) {
+ irq = (offset - 0x080) * 8 + GIC_BASE_IRQ;
+ if (irq >= s->num_irq) {
+ goto bad_reg;
+ }
+ for (i = 0; i < 8; i++) {
+ /* Group bits are banked for private interrupts
(internal)*/
+ int cm = (irq < GIC_INTERNAL) ? (1 << cpu) : ALL_CPU_MASK;
+ if (value & (1 << i)) {
+ /* Group1 (Non-secure) */
+ GIC_SET_GROUP1(irq + i, cm);
+ } else {
+ /* Group0 (Secure) */
+ GIC_SET_GROUP0(irq + i, cm);
+ }
+ }
+ }
} else {
goto bad_reg;
}
diff --git a/hw/intc/arm_gic_common.c b/hw/intc/arm_gic_common.c
index 302a056..f74175d 100644
--- a/hw/intc/arm_gic_common.c
+++ b/hw/intc/arm_gic_common.c
@@ -52,6 +52,7 @@ static const VMStateDescription vmstate_gic_irq_state = {
VMSTATE_UINT8(level, gic_irq_state),
VMSTATE_BOOL(model, gic_irq_state),
VMSTATE_BOOL(edge_trigger, gic_irq_state),
+ VMSTATE_UINT8(group, gic_irq_state),
VMSTATE_END_OF_LIST()
}
};
diff --git a/hw/intc/gic_internal.h b/hw/intc/gic_internal.h
index 48a58d7..b0430ff 100644
--- a/hw/intc/gic_internal.h
+++ b/hw/intc/gic_internal.h
@@ -50,6 +50,10 @@
s->priority1[irq][cpu] : \
s->priority2[(irq) - GIC_INTERNAL])
#define GIC_TARGET(irq) s->irq_target[irq]
+#define GIC_SET_GROUP0(irq, cm) (s->irq_state[irq].group |= (cm))
+#define GIC_SET_GROUP1(irq, cm) (s->irq_state[irq].group &= ~(cm))
+#define GIC_TEST_GROUP0(irq, cm) ((s->irq_state[irq].group & (cm)) == 0)
+
/* The special cases for the revision property: */
#define REV_11MPCORE 0
diff --git a/include/hw/intc/arm_gic_common.h b/include/hw/intc/arm_gic_common.h
index 4e25017..a61e52e 100644
--- a/include/hw/intc/arm_gic_common.h
+++ b/include/hw/intc/arm_gic_common.h
@@ -42,6 +42,7 @@ typedef struct gic_irq_state {
uint8_t level;
bool model; /* 0 = N:N, 1 = 1:N */
bool edge_trigger; /* true: edge-triggered, false: level-triggered */
+ uint8_t group;
} gic_irq_state;
typedef struct GICState {
--
1.8.3.2
- [Qemu-devel] [PATCH 00/15] target-arm: Add GICv1/SecExt and GICv2/Grouping, Fabian Aggeler, 2014/08/22
- [Qemu-devel] [PATCH 02/15] hw/arm/vexpress.c: Wire FIQ between CPU <> GIC, Fabian Aggeler, 2014/08/22
- [Qemu-devel] [PATCH 15/15] hw/intc/arm_gic: add gic_update() for grouping, Fabian Aggeler, 2014/08/22
- [Qemu-devel] [PATCH 10/15] hw/intc/arm_gic: Handle grouping for GICC_HPPIR, Fabian Aggeler, 2014/08/22
- [Qemu-devel] [PATCH 04/15] hw/intc/arm_gic: Add ns_access() function, Fabian Aggeler, 2014/08/22
- [Qemu-devel] [PATCH 05/15] hw/intc/arm_gic: Add Interrupt Group Registers,
Fabian Aggeler <=
- [Qemu-devel] [PATCH 06/15] hw/intc/arm_gic: Make ICDDCR/GICD_CTLR banked, Fabian Aggeler, 2014/08/22
- [Qemu-devel] [PATCH 08/15] hw/intc/arm_gic: Make ICCBPR/GICC_BPR banked, Fabian Aggeler, 2014/08/22
- [Qemu-devel] [PATCH 12/15] hw/intc/arm_gic: Change behavior of IAR writes, Fabian Aggeler, 2014/08/22
- [Qemu-devel] [PATCH 11/15] hw/intc/arm_gic: Change behavior of EOIR writes, Fabian Aggeler, 2014/08/22
- [Qemu-devel] [PATCH 01/15] hw/intc/arm_gic: Request FIQ sources, Fabian Aggeler, 2014/08/22
- [Qemu-devel] [PATCH 07/15] hw/intc/arm_gic: Make ICCICR/GICC_CTLR banked, Fabian Aggeler, 2014/08/22
- [Qemu-devel] [PATCH 03/15] hw/intc/arm_gic: Add Security Extensions property, Fabian Aggeler, 2014/08/22