[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [Qemu-stable] [PATCH 06/25] pci: Use bus master address
From: |
Greg Kurz |
Subject: |
Re: [Qemu-devel] [Qemu-stable] [PATCH 06/25] pci: Use bus master address space for delivering MSI/MSI-X messages |
Date: |
Thu, 28 Aug 2014 12:18:06 +0200 |
On Wed, 27 Aug 2014 12:36:03 -0500
Michael Roth <address@hidden> wrote:
> From: Jan Kiszka <address@hidden>
>
> The spec says (and real HW confirms this) that, if the bus master bit
> is 0, the device will not generate any PCI accesses. MSI and MSI-X
> messages fall among these, so we should use the corresponding address
> space to deliver them. This will prevent delivery if bus master support
> is disabled.
>
> Cc: address@hidden
> Signed-off-by: Jan Kiszka <address@hidden>
> Reviewed-by: Michael S. Tsirkin <address@hidden>
> Signed-off-by: Michael S. Tsirkin <address@hidden>
> (cherry picked from commit cc943c36faa192cd4b32af8fe5edb31894017d35)
> Signed-off-by: Michael Roth <address@hidden>
> ---
Hi Michael,
This commit breaks virtio for spapr. A fix is available in Alex's ppc-next:
From: Greg Kurz <address@hidden>
spapr_pci: map the MSI window in each PHB
https://github.com/agraf/qemu/commit/7af2868fc76857e19c232bbe9e99a95d61138213
Cheers.
--
Greg
> hw/pci/msi.c | 2 +-
> hw/pci/msix.c | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/hw/pci/msi.c b/hw/pci/msi.c
> index a4a3040..52d2313 100644
> --- a/hw/pci/msi.c
> +++ b/hw/pci/msi.c
> @@ -291,7 +291,7 @@ void msi_notify(PCIDevice *dev, unsigned int vector)
> "notify vector 0x%x"
> " address: 0x%"PRIx64" data: 0x%"PRIx32"\n",
> vector, msg.address, msg.data);
> - stl_le_phys(&address_space_memory, msg.address, msg.data);
> + stl_le_phys(&dev->bus_master_as, msg.address, msg.data);
> }
>
> /* Normally called by pci_default_write_config(). */
> diff --git a/hw/pci/msix.c b/hw/pci/msix.c
> index 5c49bfc..20ae476 100644
> --- a/hw/pci/msix.c
> +++ b/hw/pci/msix.c
> @@ -439,7 +439,7 @@ void msix_notify(PCIDevice *dev, unsigned vector)
>
> msg = msix_get_message(dev, vector);
>
> - stl_le_phys(&address_space_memory, msg.address, msg.data);
> + stl_le_phys(&dev->bus_master_as, msg.address, msg.data);
> }
>
> void msix_reset(PCIDevice *dev)
--
Gregory Kurz address@hidden
address@hidden
Software Engineer @ IBM/Meiosys http://www.ibm.com
Tel +33 (0)562 165 496
"Anarchy is about taking complete responsibility for yourself."
Alan Moore.
- [Qemu-devel] Patch Round-up for stable 2.1.1, freeze on 2014-09-03, Michael Roth, 2014/08/27
- [Qemu-devel] [PATCH 03/25] vfio: Fix MSI-X vector expansion, Michael Roth, 2014/08/27
- [Qemu-devel] [PATCH 04/25] l2tpv3 (configure): it is linux-specific, Michael Roth, 2014/08/27
- [Qemu-devel] [PATCH 07/25] hw:i386: typo fix: MEMORY_HOPTLUG_DEVICE -> MEMORY_HOTPLUG_DEVICE, Michael Roth, 2014/08/27
- [Qemu-devel] [PATCH 02/25] qdev-monitor: include QOM properties in -device FOO, help output, Michael Roth, 2014/08/27
- [Qemu-devel] [PATCH 05/25] ide: only constrain read/write requests to drive size, not other types, Michael Roth, 2014/08/27
- [Qemu-devel] [PATCH 08/25] pc-dimm: validate node property, Michael Roth, 2014/08/27
- [Qemu-devel] [PATCH 10/25] numa: show hex number in error message for consistency and prefix them with 0x, Michael Roth, 2014/08/27
- [Qemu-devel] [PATCH 09/25] pc-dimm: fix up error message, Michael Roth, 2014/08/27
- [Qemu-devel] [PATCH 06/25] pci: Use bus master address space for delivering MSI/MSI-X messages, Michael Roth, 2014/08/27
- Re: [Qemu-devel] [Qemu-stable] [PATCH 06/25] pci: Use bus master address space for delivering MSI/MSI-X messages,
Greg Kurz <=
- [Qemu-devel] [PATCH 12/25] virtio-blk: fix reference a pointer which might be freed, Michael Roth, 2014/08/27
- [Qemu-devel] [PATCH 13/25] target-arm: Fix return address for A64 BRK instructions, Michael Roth, 2014/08/27
- [Qemu-devel] [PATCH 11/25] acpi: align RSDP, Michael Roth, 2014/08/27
- [Qemu-devel] [PATCH 16/25] block/iscsi: fix memory corruption on iscsi resize, Michael Roth, 2014/08/27
- [Qemu-devel] [PATCH 15/25] arm/virt: Use PSCI v0.2 function IDs in the DT when KVM uses PSCI v0.2, Michael Roth, 2014/08/27
- [Qemu-devel] [PATCH 18/25] qemu-iotests: add test case 101 for short file I/O, Michael Roth, 2014/08/27
- [Qemu-devel] [PATCH 01/25] qmp: hide "hotplugged" device property from device-list-properties, Michael Roth, 2014/08/27
- [Qemu-devel] [PATCH 20/25] vmxnet3: Pad short frames to minimum size (60 bytes), Michael Roth, 2014/08/27
- [Qemu-devel] [PATCH 17/25] raw-posix: fix O_DIRECT short reads, Michael Roth, 2014/08/27