[Qemu-devel] [PULL v2 45/59] ahci: Adding basic functionality qtest.

[Stefan Hajnoczi]

From: John Snow <address@hidden>

Currently, there is no qtest to test the functionality of
the AHCI functionality present within the Q35 machine type.

This patch adds a skeleton for an AHCI test suite,
and adds a simple sanity-check test case where we
identify that the AHCI device is present, then
disengage the virtual machine.

Signed-off-by: John Snow <address@hidden>
Message-id: address@hidden
Signed-off-by: Stefan Hajnoczi <address@hidden>
---
 tests/Makefile    |   2 +
 tests/ahci-test.c | 196 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 198 insertions(+)
 create mode 100644 tests/ahci-test.c

diff --git a/tests/Makefile b/tests/Makefile
index a5e3d0c..f5de29c 100644
--- a/tests/Makefile
+++ b/tests/Makefile
@@ -132,6 +132,7 @@ check-qtest-i386-y = tests/endianness-test$(EXESUF)
 check-qtest-i386-y += tests/fdc-test$(EXESUF)
 gcov-files-i386-y = hw/block/fdc.c
 check-qtest-i386-y += tests/ide-test$(EXESUF)
+check-qtest-i386-y += tests/ahci-test$(EXESUF)
 check-qtest-i386-y += tests/hd-geo-test$(EXESUF)
 gcov-files-i386-y += hw/block/hd-geometry.c
 check-qtest-i386-y += tests/boot-order-test$(EXESUF)
@@ -307,6 +308,7 @@ tests/endianness-test$(EXESUF): tests/endianness-test.o
 tests/spapr-phb-test$(EXESUF): tests/spapr-phb-test.o $(libqos-obj-y)
 tests/fdc-test$(EXESUF): tests/fdc-test.o
 tests/ide-test$(EXESUF): tests/ide-test.o $(libqos-pc-obj-y)
+tests/ahci-test$(EXESUF): tests/ahci-test.o $(libqos-pc-obj-y)
 tests/hd-geo-test$(EXESUF): tests/hd-geo-test.o
 tests/boot-order-test$(EXESUF): tests/boot-order-test.o $(libqos-obj-y)
 tests/bios-tables-test$(EXESUF): tests/bios-tables-test.o $(libqos-obj-y)
diff --git a/tests/ahci-test.c b/tests/ahci-test.c
new file mode 100644
index 0000000..cc49dba
--- /dev/null
+++ b/tests/ahci-test.c
@@ -0,0 +1,196 @@
+/*
+ * AHCI test cases
+ *
+ * Copyright (c) 2014 John Snow <address@hidden>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to 
deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 
FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <stdio.h>
+
+#include <glib.h>
+
+#include "libqtest.h"
+#include "libqos/pci-pc.h"
+#include "libqos/malloc-pc.h"
+
+#include "qemu-common.h"
+#include "qemu/host-utils.h"
+
+#include "hw/pci/pci_ids.h"
+#include "hw/pci/pci_regs.h"
+
+/* Test-specific defines. */
+#define TEST_IMAGE_SIZE    (64 * 1024 * 1024)
+
+/*** Supplementary PCI Config Space IDs & Masks ***/
+#define PCI_DEVICE_ID_INTEL_Q35_AHCI   (0x2922)
+
+/*** Globals ***/
+static QGuestAllocator *guest_malloc;
+static QPCIBus *pcibus;
+static char tmp_path[] = "/tmp/qtest.XXXXXX";
+
+/*** Function Declarations ***/
+static QPCIDevice *get_ahci_device(void);
+static void free_ahci_device(QPCIDevice *dev);
+
+/*** Utilities ***/
+
+/**
+ * Locate, verify, and return a handle to the AHCI device.
+ */
+static QPCIDevice *get_ahci_device(void)
+{
+    QPCIDevice *ahci;
+    uint16_t vendor_id, device_id;
+
+    pcibus = qpci_init_pc();
+
+    /* Find the AHCI PCI device and verify it's the right one. */
+    ahci = qpci_device_find(pcibus, QPCI_DEVFN(0x1F, 0x02));
+    g_assert(ahci != NULL);
+
+    vendor_id = qpci_config_readw(ahci, PCI_VENDOR_ID);
+    device_id = qpci_config_readw(ahci, PCI_DEVICE_ID);
+
+    g_assert_cmphex(vendor_id, ==, PCI_VENDOR_ID_INTEL);
+    g_assert_cmphex(device_id, ==, PCI_DEVICE_ID_INTEL_Q35_AHCI);
+
+    return ahci;
+}
+
+static void free_ahci_device(QPCIDevice *ahci)
+{
+    /* libqos doesn't have a function for this, so free it manually */
+    g_free(ahci);
+
+    if (pcibus) {
+        qpci_free_pc(pcibus);
+        pcibus = NULL;
+    }
+}
+
+/*** Test Setup & Teardown ***/
+
+/**
+ * Launch QEMU with the given command line,
+ * and then set up interrupts and our guest malloc interface.
+ */
+static void qtest_boot(const char *cmdline_fmt, ...)
+{
+    va_list ap;
+    char *cmdline;
+
+    va_start(ap, cmdline_fmt);
+    cmdline = g_strdup_vprintf(cmdline_fmt, ap);
+    va_end(ap);
+
+    qtest_start(cmdline);
+    qtest_irq_intercept_in(global_qtest, "ioapic");
+    guest_malloc = pc_alloc_init();
+
+    g_free(cmdline);
+}
+
+/**
+ * Tear down the QEMU instance.
+ */
+static void qtest_shutdown(void)
+{
+    g_free(guest_malloc);
+    guest_malloc = NULL;
+    qtest_end();
+}
+
+/**
+ * Start a Q35 machine and bookmark a handle to the AHCI device.
+ */
+static QPCIDevice *ahci_boot(void)
+{
+    qtest_boot("-drive if=none,id=drive0,file=%s,cache=writeback,serial=%s"
+               " -M q35 "
+               "-device ide-hd,drive=drive0 "
+               "-global ide-hd.ver=%s",
+               tmp_path, "testdisk", "version");
+
+    /* Verify that we have an AHCI device present. */
+    return get_ahci_device();
+}
+
+/**
+ * Clean up the PCI device, then terminate the QEMU instance.
+ */
+static void ahci_shutdown(QPCIDevice *ahci)
+{
+    free_ahci_device(ahci);
+    qtest_shutdown();
+}
+
+/******************************************************************************/
+/* Test Interfaces                                                            
*/
+/******************************************************************************/
+
+/**
+ * Basic sanity test to boot a machine, find an AHCI device, and shutdown.
+ */
+static void test_sanity(void)
+{
+    QPCIDevice *ahci;
+    ahci = ahci_boot();
+    ahci_shutdown(ahci);
+}
+
+/******************************************************************************/
+
+int main(int argc, char **argv)
+{
+    const char *arch;
+    int fd;
+    int ret;
+
+    /* Should be first to utilize g_test functionality, So we can see errors. 
*/
+    g_test_init(&argc, &argv, NULL);
+
+    /* Check architecture */
+    arch = qtest_get_arch();
+    if (strcmp(arch, "i386") && strcmp(arch, "x86_64")) {
+        g_test_message("Skipping test for non-x86");
+        return 0;
+    }
+
+    /* Create a temporary raw image */
+    fd = mkstemp(tmp_path);
+    g_assert(fd >= 0);
+    ret = ftruncate(fd, TEST_IMAGE_SIZE);
+    g_assert(ret == 0);
+    close(fd);
+
+    /* Run the tests */
+    qtest_add_func("/ahci/sanity",     test_sanity);
+
+    ret = g_test_run();
+
+    /* Cleanup */
+    unlink(tmp_path);
+
+    return ret;
+}
-- 
1.9.3