[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [v3 2/2] kvm, vfio: Update VT-d Posted-Interrupts related i
From: |
Feng Wu |
Subject: |
[Qemu-devel] [v3 2/2] kvm, vfio: Update VT-d Posted-Interrupts related information |
Date: |
Fri, 12 Dec 2014 23:18:43 +0800 |
VT-d Posted-Interrupts(PI) is an enhancement to CPU side Posted-Interrupt.
With VT-d Posted-Interrupts enabled, external interrupts from
direct-assigned devices can be delivered to guests without VMM
involvement when guest is running in non-root mode.
If VT-d PI is supported by KVM, we need to update the IRTE with
the new guest interrupt configuration.
Signed-off-by: Feng Wu <address@hidden>
---
hw/misc/vfio.c | 60 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 58 insertions(+), 2 deletions(-)
diff --git a/hw/misc/vfio.c b/hw/misc/vfio.c
index fd318a1..5bdc49c 100644
--- a/hw/misc/vfio.c
+++ b/hw/misc/vfio.c
@@ -281,6 +281,8 @@ static uint32_t vfio_pci_read_config(PCIDevice *pdev,
uint32_t addr, int len);
static void vfio_pci_write_config(PCIDevice *pdev, uint32_t addr,
uint32_t val, int len);
static void vfio_mmap_set_enabled(VFIODevice *vdev, bool enabled);
+static void vfio_kvm_device_posting_irq(VFIODevice *vdev, uint32_t index,
+ uint32_t start, uint32_t count);
/*
* Common VFIO interrupt disable
@@ -765,6 +767,7 @@ static int vfio_msix_vector_do_use(PCIDevice *pdev,
unsigned int nr,
{
VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev);
VFIOMSIVector *vector;
+ uint32_t start, count;
int ret;
DPRINTF("%s(%04x:%02x:%02x.%x) vector %d used\n", __func__,
@@ -812,6 +815,8 @@ static int vfio_msix_vector_do_use(PCIDevice *pdev,
unsigned int nr,
if (ret) {
error_report("vfio: failed to enable vectors, %d", ret);
}
+ start = 0;
+ count = vdev->nr_vectors;
} else {
int argsz;
struct vfio_irq_set *irq_set;
@@ -824,8 +829,8 @@ static int vfio_msix_vector_do_use(PCIDevice *pdev,
unsigned int nr,
irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD |
VFIO_IRQ_SET_ACTION_TRIGGER;
irq_set->index = VFIO_PCI_MSIX_IRQ_INDEX;
- irq_set->start = nr;
- irq_set->count = 1;
+ irq_set->start = start = nr;
+ irq_set->count = count = 1;
pfd = (int32_t *)&irq_set->data;
if (vector->virq >= 0) {
@@ -841,6 +846,11 @@ static int vfio_msix_vector_do_use(PCIDevice *pdev,
unsigned int nr,
}
}
+ if (msg) {
+ vfio_kvm_device_posting_irq(vdev, VFIO_PCI_MSIX_IRQ_INDEX,
+ start, count);
+ }
+
return 0;
}
@@ -997,6 +1007,9 @@ retry:
return;
}
+ vfio_kvm_device_posting_irq(vdev, VFIO_PCI_MSI_IRQ_INDEX,
+ 0, vdev->nr_vectors);
+
DPRINTF("%s(%04x:%02x:%02x.%x) Enabled %d MSI vectors\n", __func__,
vdev->host.domain, vdev->host.bus, vdev->host.slot,
vdev->host.function, vdev->nr_vectors);
@@ -1077,6 +1090,9 @@ static void vfio_update_msi(VFIODevice *vdev)
msg = msi_get_message(&vdev->pdev, i);
vfio_update_kvm_msi_virq(vector, msg);
}
+
+ vfio_kvm_device_posting_irq(vdev, VFIO_PCI_MSIX_IRQ_INDEX,
+ 0, vdev->nr_vectors);
}
/*
@@ -3622,6 +3638,46 @@ static void vfio_kvm_device_del_group(VFIOGroup *group)
#endif
}
+static void vfio_kvm_device_posting_irq(VFIODevice *vdev, uint32_t index,
+ uint32_t start, uint32_t count)
+{
+#ifdef CONFIG_KVM
+ int i, argsz;
+ struct kvm_vfio_dev_irq *pi_info = NULL;
+
+ struct kvm_device_attr attr = {
+ .group = KVM_DEV_VFIO_DEVICE,
+ .attr = KVM_DEV_VFIO_DEVICE_POST_IRQ,
+ };
+
+ if (!kvm_enabled() ||
+ ioctl(vfio_kvm_device_fd, KVM_HAS_DEVICE_ATTR, &attr) != 0) {
+ return;
+ }
+
+ argsz = sizeof(*pi_info) + sizeof(int) * count;
+
+ pi_info = g_malloc0(argsz);
+ pi_info->argsz = argsz;
+ pi_info->fd = vdev->fd;
+ pi_info->index = index;
+ pi_info->start = start;
+ pi_info->count = count;
+
+ for (i = 0; i < count; i++) {
+ pi_info->gsi[i] = vdev->msi_vectors[start+i].virq;;
+ }
+
+ attr.addr = (uint64_t)(unsigned long)pi_info;
+
+ if (ioctl(vfio_kvm_device_fd, KVM_SET_DEVICE_ATTR, &attr)) {
+ error_report("Failed to configure PI for KVM VFIO device: %m\n");
+ }
+
+ g_free(pi_info);
+#endif
+}
+
static VFIOAddressSpace *vfio_get_address_space(AddressSpace *as)
{
VFIOAddressSpace *space;
--
1.9.1
- [Qemu-devel] [v3 0/2] Add VT-d Posted-Interrupts support, Feng Wu, 2014/12/12
- [Qemu-devel] [v3 2/2] kvm, vfio: Update VT-d Posted-Interrupts related information,
Feng Wu <=
- [Qemu-devel] [v3 0/2] Add VT-d Posted-Interrupts support, Feng Wu, 2014/12/12
- [Qemu-devel] [v3 2/2] kvm, vfio: Update VT-d Posted-Interrupts related information, Feng Wu, 2014/12/12
- [Qemu-devel] [v3 1/2] kvm, vfio: Define new VFIO data structure for VT-d Posted-Interrupts., Feng Wu, 2014/12/12
- [Qemu-devel] [v3 1/2] kvm, vfio: Define new VFIO data structure for VT-d Posted-Interrupts., Feng Wu, 2014/12/12