[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 04/18] virtio: Return error from virtqueue_next_
From: |
Fam Zheng |
Subject: |
Re: [Qemu-devel] [PATCH 04/18] virtio: Return error from virtqueue_next_desc |
Date: |
Tue, 21 Apr 2015 15:30:23 +0800 |
User-agent: |
Mutt/1.5.23 (2014-03-12) |
On Tue, 04/21 08:37, Michael S. Tsirkin wrote:
> On Fri, Apr 17, 2015 at 03:59:19PM +0800, Fam Zheng wrote:
> > Two callers pass error_abort now, which can be changed to check return value
> > and pass the error on.
> >
> > Signed-off-by: Fam Zheng <address@hidden>
> > ---
> > hw/virtio/virtio.c | 27 ++++++++++++++++++---------
> > 1 file changed, 18 insertions(+), 9 deletions(-)
> >
> > diff --git a/hw/virtio/virtio.c b/hw/virtio/virtio.c
> > index a525f8e..2a24829 100644
> > --- a/hw/virtio/virtio.c
> > +++ b/hw/virtio/virtio.c
> > @@ -329,10 +329,11 @@ static int virtqueue_get_head(VirtQueue *vq, unsigned
> > int idx,
> > return head;
> > }
> >
> > -static unsigned virtqueue_next_desc(VirtIODevice *vdev, hwaddr desc_pa,
> > - unsigned int i, unsigned int max)
> > +static int virtqueue_next_desc(VirtIODevice *vdev, hwaddr desc_pa,
> > + unsigned int i, unsigned int max,
> > + Error **errp)
> > {
> > - unsigned int next;
> > + int next;
> >
> > /* If this descriptor says it doesn't chain, we're done. */
> > if (!(vring_desc_flags(vdev, desc_pa, i) & VRING_DESC_F_NEXT)) {
> > @@ -345,8 +346,8 @@ static unsigned virtqueue_next_desc(VirtIODevice *vdev,
> > hwaddr desc_pa,
> > smp_wmb();
> >
> > if (next >= max) {
> > - error_report("Desc next is %u", next);
> > - exit(1);
> > + error_setg(errp, "Desc next is %u", next);
> > + return -EINVAL;
>
> I think it's best to return max here. No need to change return type
> then.
We use negative return code elsewherer for reporting errors, I personally
prefer -EINVAL. Are you concerned about overflow?
>
> > }
> >
> > return next;
> > @@ -392,7 +393,7 @@ void virtqueue_get_avail_bytes(VirtQueue *vq, unsigned
> > int *in_bytes,
> > num_bufs = i = 0;
> > }
> >
> > - do {
> > + while (true) {
> > /* If we've got too many, that implies a descriptor loop. */
> > if (++num_bufs > max) {
> > error_report("Looped descriptor");
> > @@ -407,7 +408,11 @@ void virtqueue_get_avail_bytes(VirtQueue *vq, unsigned
> > int *in_bytes,
> > if (in_total >= max_in_bytes && out_total >= max_out_bytes) {
> > goto done;
> > }
> > - } while ((i = virtqueue_next_desc(vdev, desc_pa, i, max)) != max);
> > + i = virtqueue_next_desc(vdev, desc_pa, i, max, &error_abort);
> > + if (i == max) {
> > + break;
> > + }
> > + }
> >
> > if (!indirect)
> > total_bufs = num_bufs;
> > @@ -493,7 +498,7 @@ int virtqueue_pop(VirtQueue *vq, VirtQueueElement *elem)
> > }
> >
> > /* Collect all the descriptors */
> > - do {
> > + while (true) {
> > struct iovec *sg;
> >
> > if (vring_desc_flags(vdev, desc_pa, i) & VRING_DESC_F_WRITE) {
> > @@ -519,7 +524,11 @@ int virtqueue_pop(VirtQueue *vq, VirtQueueElement
> > *elem)
> > error_report("Looped descriptor");
> > exit(1);
> > }
> > - } while ((i = virtqueue_next_desc(vdev, desc_pa, i, max)) != max);
> > + i = virtqueue_next_desc(vdev, desc_pa, i, max, &error_abort);
> > + if (i == max) {
> > + break;
> > + }
> > + }
> >
>
> Why refactor this as part of this patch?
Graceful error handling will need to un-inline the loop condition, so refactor
it as we're touching the line.
Fam
>
> > /* Now map what we have collected */
> > virtqueue_map_sg(elem->in_sg, elem->in_addr, elem->in_num, 1,
> > --
> > 1.9.3
- [Qemu-devel] [PATCH 11/18] virtio: Add "needs_reset" flag to virtio device, (continued)
- [Qemu-devel] [PATCH 11/18] virtio: Add "needs_reset" flag to virtio device, Fam Zheng, 2015/04/17
- [Qemu-devel] [PATCH 12/18] virtio: Return -EINVAL if the vdev needs reset in virtqueue_pop, Fam Zheng, 2015/04/17
- [Qemu-devel] [PATCH 13/18] virtio-blk: Graceful error handling of virtqueue_pop, Fam Zheng, 2015/04/17
- [Qemu-devel] [PATCH 14/18] qtest: Add "QTEST_FILTER" to filter test cases, Fam Zheng, 2015/04/17
- [Qemu-devel] [PATCH 15/18] qtest: virtio-blk: Extract "setup" for future reuse, Fam Zheng, 2015/04/17
- [Qemu-devel] [PATCH 16/18] libqos: Add qvirtio_needs_reset, Fam Zheng, 2015/04/17
- [Qemu-devel] [PATCH 17/18] qtest: Add test case for "needs reset" of virtio-blk, Fam Zheng, 2015/04/17
- [Qemu-devel] [PATCH 18/18] qtest: virtio-blk: Suppress virtio error messages in "make check", Fam Zheng, 2015/04/17
- [Qemu-devel] [PATCH 04/18] virtio: Return error from virtqueue_next_desc, Fam Zheng, 2015/04/17
- [Qemu-devel] [PATCH 08/18] virtio: Return error from virtio_add_queue, Fam Zheng, 2015/04/17
- Re: [Qemu-devel] [PATCH 00/18] virtio-blk: Support "VIRTIO_CONFIG_S_NEEDS_RESET", Cornelia Huck, 2015/04/20
- Re: [Qemu-devel] [PATCH 00/18] virtio-blk: Support "VIRTIO_CONFIG_S_NEEDS_RESET", Fam Zheng, 2015/04/21
- Re: [Qemu-devel] [PATCH 00/18] virtio-blk: Support "VIRTIO_CONFIG_S_NEEDS_RESET", Cornelia Huck, 2015/04/21
- Re: [Qemu-devel] [PATCH 00/18] virtio-blk: Support "VIRTIO_CONFIG_S_NEEDS_RESET", Fam Zheng, 2015/04/21
- Re: [Qemu-devel] [PATCH 00/18] virtio-blk: Support "VIRTIO_CONFIG_S_NEEDS_RESET", Cornelia Huck, 2015/04/21
- Re: [Qemu-devel] [PATCH 00/18] virtio-blk: Support "VIRTIO_CONFIG_S_NEEDS_RESET", Fam Zheng, 2015/04/21
- Re: [Qemu-devel] [PATCH 00/18] virtio-blk: Support "VIRTIO_CONFIG_S_NEEDS_RESET", Cornelia Huck, 2015/04/21
- Re: [Qemu-devel] [PATCH 00/18] virtio-blk: Support "VIRTIO_CONFIG_S_NEEDS_RESET", Michael S. Tsirkin, 2015/04/21