[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 08/14] qtest/ahci: add halted dma test
From: |
John Snow |
Subject: |
[Qemu-devel] [PULL 08/14] qtest/ahci: add halted dma test |
Date: |
Mon, 11 May 2015 14:12:37 -0400 |
If we're going to test the migration of halted DMA jobs,
we should probably check to make sure we can resume them
locally as a first step.
Signed-off-by: John Snow <address@hidden>
Reviewed-by: Kevin Wolf <address@hidden>
Message-id: address@hidden
---
tests/ahci-test.c | 60 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/tests/ahci-test.c b/tests/ahci-test.c
index f770c9d..aa0db92 100644
--- a/tests/ahci-test.c
+++ b/tests/ahci-test.c
@@ -1153,6 +1153,65 @@ static void test_migrate_dma(void)
}
/**
+ * DMA Error Test
+ *
+ * Simulate an error on first write, Try to write a pattern,
+ * Confirm the VM has stopped, resume the VM, verify command
+ * has completed, then read back the data and verify.
+ */
+static void test_halted_dma(void)
+{
+ AHCIQState *ahci;
+ uint8_t port;
+ size_t bufsize = 4096;
+ unsigned char *tx = g_malloc(bufsize);
+ unsigned char *rx = g_malloc0(bufsize);
+ unsigned i;
+ uint64_t ptr;
+ AHCICommand *cmd;
+
+ prepare_blkdebug_script(debug_path, "write_aio");
+
+ ahci = ahci_boot_and_enable("-drive file=blkdebug:%s:%s,if=none,id=drive0,"
+ "format=qcow2,cache=writeback,"
+ "rerror=stop,werror=stop "
+ "-M q35 "
+ "-device ide-hd,drive=drive0 ",
+ debug_path,
+ tmp_path);
+
+ /* Initialize and prepare */
+ port = ahci_port_select(ahci);
+ ahci_port_clear(ahci, port);
+
+ for (i = 0; i < bufsize; i++) {
+ tx[i] = (bufsize - i);
+ }
+
+ /* create DMA source buffer and write pattern */
+ ptr = ahci_alloc(ahci, bufsize);
+ g_assert(ptr);
+ memwrite(ptr, tx, bufsize);
+
+ /* Attempt to write (and fail) */
+ cmd = ahci_guest_io_halt(ahci, port, CMD_WRITE_DMA,
+ ptr, bufsize, 0);
+
+ /* Attempt to resume the command */
+ ahci_guest_io_resume(ahci, cmd);
+ ahci_free(ahci, ptr);
+
+ /* Read back and verify */
+ ahci_io(ahci, port, CMD_READ_DMA, rx, bufsize, 0);
+ g_assert_cmphex(memcmp(tx, rx, bufsize), ==, 0);
+
+ /* Cleanup and go home */
+ ahci_shutdown(ahci);
+ g_free(rx);
+ g_free(tx);
+}
+
+/**
* Migration test: Try to flush, migrate, then resume.
*/
static void test_flush_migrate(void)
@@ -1453,6 +1512,7 @@ int main(int argc, char **argv)
qtest_add_func("/ahci/migrate/sanity", test_migrate_sanity);
qtest_add_func("/ahci/migrate/dma", test_migrate_dma);
+ qtest_add_func("/ahci/io/dma/lba28/retry", test_halted_dma);
ret = g_test_run();
--
2.1.0
- [Qemu-devel] [PULL 00/14] Ide patches, John Snow, 2015/05/11
- [Qemu-devel] [PULL 02/14] libqos/ahci: Fix sector set method, John Snow, 2015/05/11
- [Qemu-devel] [PULL 01/14] libqos/ahci: Add halted command helpers, John Snow, 2015/05/11
- [Qemu-devel] [PULL 03/14] libqos: Add migration helpers, John Snow, 2015/05/11
- [Qemu-devel] [PULL 04/14] ich9/ahci: Enable Migration, John Snow, 2015/05/11
- [Qemu-devel] [PULL 07/14] qtest/ahci: add flush migrate test, John Snow, 2015/05/11
- [Qemu-devel] [PULL 05/14] qtest/ahci: Add migration test, John Snow, 2015/05/11
- [Qemu-devel] [PULL 08/14] qtest/ahci: add halted dma test,
John Snow <=
- [Qemu-devel] [PULL 06/14] qtest/ahci: add migrate dma test, John Snow, 2015/05/11
- [Qemu-devel] [PULL 09/14] qtest/ahci: add migrate halted dma test, John Snow, 2015/05/11
- [Qemu-devel] [PULL 12/14] qtest: add memset to qtest protocol, John Snow, 2015/05/11
- [Qemu-devel] [PULL 11/14] qtest: Add base64 encoded read/write, John Snow, 2015/05/11
- [Qemu-devel] [PULL 10/14] qtest: allow arbitrarily long sends, John Snow, 2015/05/11
- [Qemu-devel] [PULL 14/14] qtest: pre-buffer hex nibs, John Snow, 2015/05/11
- [Qemu-devel] [PULL 13/14] libqos/ahci: Swap memread/write with bufread/write, John Snow, 2015/05/11
- Re: [Qemu-devel] [PULL 00/14] Ide patches, Peter Maydell, 2015/05/12