[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [RFC v8.1 10/13] vfio: do hot bus reset when do virtual sec
From: |
Chen Fan |
Subject: |
[Qemu-devel] [RFC v8.1 10/13] vfio: do hot bus reset when do virtual secondary bus reset |
Date: |
Wed, 27 May 2015 10:46:31 +0800 |
when do virtual secondary bus reset, the vfio device under
this bus need to do host bus reset to reset the device.
so add this case.
Signed-off-by: Chen Fan <address@hidden>
---
hw/vfio/pci.c | 75 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 75 insertions(+)
diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index a8c5988..b05ccdf 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -3803,6 +3803,64 @@ out:
g_free(info);
}
+/* Check when device reset the affected devices is single or multi,
+ * because there was differentiate the hot reset of mulitple in-use
+ * devices and hot reset of a single in-use device. */
+static int vfio_pci_affect_devices_is_multi(VFIOPCIDevice *vdev)
+{
+ VFIOGroup *group;
+ struct vfio_pci_hot_reset_info *info = NULL;
+ struct vfio_pci_dependent_device *devices;
+ int ret, i, count = 0;
+
+ ret = vfio_get_hot_reset_info(vdev, &info);
+ if (ret < 0) {
+ goto out;
+ }
+
+ devices = &info->devices[0];
+
+ /* Verify that we have all the groups required */
+ for (i = 0; i < info->count; i++) {
+ PCIHostDeviceAddress host;
+ VFIODevice *vbasedev_iter;
+
+ host.domain = devices[i].segment;
+ host.bus = devices[i].bus;
+ host.slot = PCI_SLOT(devices[i].devfn);
+ host.function = PCI_FUNC(devices[i].devfn);
+
+ /* Skip the current device */
+ if (vfio_pci_host_match(&host, &vdev->host)) {
+ continue;
+ }
+
+ /* Ensure we own the group of the affected device */
+ QLIST_FOREACH(group, &vfio_group_list, next) {
+ if (group->groupid == devices[i].group_id) {
+ break;
+ }
+ }
+
+ if (!group) {
+ ret = -1;
+ goto out;
+ }
+
+ QLIST_FOREACH(vbasedev_iter, &group->device_list, next) {
+ if (vbasedev_iter->type != VFIO_DEVICE_TYPE_PCI) {
+ continue;
+ }
+ count++;
+ }
+ }
+
+ ret = count;
+out:
+ g_free(info);
+ return ret;
+}
+
static void vfio_pci_machine_done_notify(Notifier *notifier, void *unused)
{
VFIOGroup *group;
@@ -4039,6 +4097,23 @@ static void vfio_pci_reset(DeviceState *dev)
trace_vfio_pci_reset(vdev->vbasedev.name);
+ if (vdev->needs_bus_reset) {
+ vdev->needs_bus_reset = false;
+ if (vdev->vbasedev.needs_reset) {
+ int ret;
+
+ ret = vfio_pci_affect_devices_is_multi(vdev);
+ if (ret < 0) {
+ error_report("vfio: Cannot reset device %04x:%02x:%02x.%x, "
+ "get hot reset info failed.", vdev->host.domain,
+ vdev->host.bus, vdev->host.slot,
vdev->host.function);
+ } else {
+ vfio_pci_hot_reset(vdev, ret ? true : false);
+ }
+ }
+ return;
+ }
+
vfio_pci_pre_reset(vdev);
if (vdev->resetfn && !vdev->resetfn(vdev)) {
--
1.9.3
- [Qemu-devel] [RFC v8.1 04/13] aer: impove pcie_aer_init to support vfio device, (continued)
- [Qemu-devel] [RFC v8.1 04/13] aer: impove pcie_aer_init to support vfio device, Chen Fan, 2015/05/26
- [Qemu-devel] [RFC v8.1 05/13] vfio: add aer support for vfio device, Chen Fan, 2015/05/26
- [Qemu-devel] [RFC v8.1 06/13] vfio: add check host bus reset is support or not, Chen Fan, 2015/05/26
- [Qemu-devel] [RFC v8.1 07/13] vfio: add check for vfio devices which enable aer should support bus reset, Chen Fan, 2015/05/26
- [Qemu-devel] [RFC v8.1 08/13] pci: add bus reset_notifiers callbacks for host bus reset, Chen Fan, 2015/05/26
- [Qemu-devel] [RFC v8.1 09/13] vfio: add sec_bus_reset notifier to notify physical bus reset is needed, Chen Fan, 2015/05/26
- [Qemu-devel] [RFC v8.1 10/13] vfio: do hot bus reset when do virtual secondary bus reset,
Chen Fan <=
- [Qemu-devel] [RFC v8.1 11/13] pcie_aer: expose pcie_aer_msg() interface, Chen Fan, 2015/05/26
- [Qemu-devel] [RFC v8.1 12/13] vfio-pci: pass the aer error to guest, Chen Fan, 2015/05/26
- [Qemu-devel] [RFC v8.1 13/13] vfio: add 'aer' property to expose aercap, Chen Fan, 2015/05/26