[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [RFC 05/12] spapr_pci: Fold spapr_phb_vfio_eeh_reset() into
From: |
David Gibson |
Subject: |
[Qemu-devel] [RFC 05/12] spapr_pci: Fold spapr_phb_vfio_eeh_reset() into spapr_pci code |
Date: |
Thu, 19 Nov 2015 15:29:21 +1100 |
Simplify the sPAPR PCI code by folding spapr_phb_vfio_eeh_reset() into
rtas_ibm_set_slot_reset(). We move several functions of which it was
the only caller (spapr_phb_eeh_clear_dev_msix(),
spapr_phb_eeh_clear_bus_msix() and spapr_phb_eeh_pre_reset()) into
spapr_pci.c along with it.
Signed-off-by: David Gibson <address@hidden>
---
hw/ppc/spapr_pci.c | 68 ++++++++++++++++++++++++++++++++++++++++--
hw/ppc/spapr_pci_vfio.c | 72 ---------------------------------------------
include/hw/pci-host/spapr.h | 1 -
3 files changed, 66 insertions(+), 75 deletions(-)
diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index d564351..76214ec 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -565,6 +565,48 @@ param_error_exit:
rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
}
+static void spapr_phb_eeh_clear_dev_msix(PCIBus *bus, PCIDevice *pdev,
+ void *opaque)
+{
+ /* Check if the device is VFIO PCI device */
+ if (!object_dynamic_cast(OBJECT(pdev), "vfio-pci")) {
+ return;
+ }
+
+ /*
+ * The MSIx table will be cleaned out by reset. We need
+ * disable it so that it can be reenabled properly. Also,
+ * the cached MSIx table should be cleared as it's not
+ * reflecting the contents in hardware.
+ */
+ if (msix_enabled(pdev)) {
+ uint16_t flags;
+
+ flags = pci_host_config_read_common(pdev,
+ pdev->msix_cap + PCI_MSIX_FLAGS,
+ pci_config_size(pdev), 2);
+ flags &= ~PCI_MSIX_FLAGS_ENABLE;
+ pci_host_config_write_common(pdev,
+ pdev->msix_cap + PCI_MSIX_FLAGS,
+ pci_config_size(pdev), flags, 2);
+ }
+
+ msix_reset(pdev);
+}
+
+static void spapr_phb_eeh_clear_bus_msix(PCIBus *bus, void *opaque)
+{
+ pci_for_each_device(bus, pci_bus_num(bus),
+ spapr_phb_eeh_clear_dev_msix, NULL);
+}
+
+static void spapr_phb_eeh_pre_reset(sPAPRPHBState *sphb)
+{
+ PCIHostState *phb = PCI_HOST_BRIDGE(sphb);
+
+ pci_for_each_bus(phb->bus, spapr_phb_eeh_clear_bus_msix, NULL);
+}
+
static void rtas_ibm_set_slot_reset(PowerPCCPU *cpu,
sPAPRMachineState *spapr,
uint32_t token, uint32_t nargs,
@@ -574,6 +616,7 @@ static void rtas_ibm_set_slot_reset(PowerPCCPU *cpu,
sPAPRPHBState *sphb;
uint32_t option;
uint64_t buid;
+ uint32_t op;
int ret;
if ((nargs != 4) || (nret != 1)) {
@@ -591,8 +634,29 @@ static void rtas_ibm_set_slot_reset(PowerPCCPU *cpu,
goto param_error_exit;
}
- ret = spapr_phb_vfio_eeh_reset(sphb, option);
- rtas_st(rets, 0, ret);
+ switch (option) {
+ case RTAS_SLOT_RESET_DEACTIVATE:
+ op = VFIO_EEH_PE_RESET_DEACTIVATE;
+ break;
+ case RTAS_SLOT_RESET_HOT:
+ spapr_phb_eeh_pre_reset(sphb);
+ op = VFIO_EEH_PE_RESET_HOT;
+ break;
+ case RTAS_SLOT_RESET_FUNDAMENTAL:
+ spapr_phb_eeh_pre_reset(sphb);
+ op = VFIO_EEH_PE_RESET_FUNDAMENTAL;
+ break;
+ default:
+ goto param_error_exit;
+ }
+
+ ret = vfio_eeh_as_op(&sphb->iommu_as, op);
+ if (ret < 0) {
+ rtas_st(rets, 0, RTAS_OUT_HW_ERROR);
+ return;
+ }
+
+ rtas_st(rets, 0, RTAS_OUT_SUCCESS);
return;
param_error_exit:
diff --git a/hw/ppc/spapr_pci_vfio.c b/hw/ppc/spapr_pci_vfio.c
index 4408087..0872dbf 100644
--- a/hw/ppc/spapr_pci_vfio.c
+++ b/hw/ppc/spapr_pci_vfio.c
@@ -148,78 +148,6 @@ int spapr_phb_vfio_eeh_get_state(sPAPRPHBState *sphb, int
*state)
return RTAS_OUT_SUCCESS;
}
-static void spapr_phb_vfio_eeh_clear_dev_msix(PCIBus *bus,
- PCIDevice *pdev,
- void *opaque)
-{
- /* Check if the device is VFIO PCI device */
- if (!object_dynamic_cast(OBJECT(pdev), "vfio-pci")) {
- return;
- }
-
- /*
- * The MSIx table will be cleaned out by reset. We need
- * disable it so that it can be reenabled properly. Also,
- * the cached MSIx table should be cleared as it's not
- * reflecting the contents in hardware.
- */
- if (msix_enabled(pdev)) {
- uint16_t flags;
-
- flags = pci_host_config_read_common(pdev,
- pdev->msix_cap + PCI_MSIX_FLAGS,
- pci_config_size(pdev), 2);
- flags &= ~PCI_MSIX_FLAGS_ENABLE;
- pci_host_config_write_common(pdev,
- pdev->msix_cap + PCI_MSIX_FLAGS,
- pci_config_size(pdev), flags, 2);
- }
-
- msix_reset(pdev);
-}
-
-static void spapr_phb_vfio_eeh_clear_bus_msix(PCIBus *bus, void *opaque)
-{
- pci_for_each_device(bus, pci_bus_num(bus),
- spapr_phb_vfio_eeh_clear_dev_msix, NULL);
-}
-
-static void spapr_phb_vfio_eeh_pre_reset(sPAPRPHBState *sphb)
-{
- PCIHostState *phb = PCI_HOST_BRIDGE(sphb);
-
- pci_for_each_bus(phb->bus, spapr_phb_vfio_eeh_clear_bus_msix, NULL);
-}
-
-int spapr_phb_vfio_eeh_reset(sPAPRPHBState *sphb, int option)
-{
- uint32_t op;
- int ret;
-
- switch (option) {
- case RTAS_SLOT_RESET_DEACTIVATE:
- op = VFIO_EEH_PE_RESET_DEACTIVATE;
- break;
- case RTAS_SLOT_RESET_HOT:
- spapr_phb_vfio_eeh_pre_reset(sphb);
- op = VFIO_EEH_PE_RESET_HOT;
- break;
- case RTAS_SLOT_RESET_FUNDAMENTAL:
- spapr_phb_vfio_eeh_pre_reset(sphb);
- op = VFIO_EEH_PE_RESET_FUNDAMENTAL;
- break;
- default:
- return RTAS_OUT_PARAM_ERROR;
- }
-
- ret = vfio_eeh_as_op(&sphb->iommu_as, op);
- if (ret < 0) {
- return RTAS_OUT_HW_ERROR;
- }
-
- return RTAS_OUT_SUCCESS;
-}
-
static void spapr_phb_vfio_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
diff --git a/include/hw/pci-host/spapr.h b/include/hw/pci-host/spapr.h
index f02ef51..d31162b 100644
--- a/include/hw/pci-host/spapr.h
+++ b/include/hw/pci-host/spapr.h
@@ -139,6 +139,5 @@ void spapr_phb_vfio_reset(DeviceState *qdev);
int spapr_phb_vfio_eeh_set_option(sPAPRPHBState *sphb,
unsigned int addr, int option);
int spapr_phb_vfio_eeh_get_state(sPAPRPHBState *sphb, int *state);
-int spapr_phb_vfio_eeh_reset(sPAPRPHBState *sphb, int option);
#endif /* __HW_SPAPR_PCI_H__ */
--
2.5.0
- [Qemu-devel] [RFC 00/12] Merge EEH support into spapr-pci-host-bridge, David Gibson, 2015/11/18
- [Qemu-devel] [RFC 04/12] spapr_pci: Fold spapr_phb_vfio_eeh_configure() into spapr_pci code, David Gibson, 2015/11/18
- [Qemu-devel] [RFC 01/12] vfio: Start improving VFIO/EEH interface, David Gibson, 2015/11/18
- [Qemu-devel] [RFC 07/12] spapr_pci: Fold spapr_phb_vfio_eeh_set_option() into spapr_pci code, David Gibson, 2015/11/18
- [Qemu-devel] [RFC 08/12] spapr_pci: Fold spapr_phb_vfio_reset() into spapr_pci code, David Gibson, 2015/11/18
- [Qemu-devel] [RFC 10/12] spapr_pci: (Mostly) remove spapr-pci-vfio-host-bridge, David Gibson, 2015/11/18
- [Qemu-devel] [RFC 05/12] spapr_pci: Fold spapr_phb_vfio_eeh_reset() into spapr_pci code,
David Gibson <=
- [Qemu-devel] [RFC 02/12] spapr_pci: Switch to vfio_eeh_as_op() interface, David Gibson, 2015/11/18
- [Qemu-devel] [RFC 11/12] spapr_pci: Remove finish_realize hook, David Gibson, 2015/11/18
- [Qemu-devel] [RFC 03/12] spapr_pci: Eliminate class callbacks, David Gibson, 2015/11/18
- [Qemu-devel] [RFC 06/12] spapr_pci: Fold spapr_phb_vfio_eeh_get_state() into spapr_pci code, David Gibson, 2015/11/18
- [Qemu-devel] [RFC 09/12] spapr_pci: Allow EEH on spapr-pci-host-bridge, David Gibson, 2015/11/18
- [Qemu-devel] [RFC 12/12] vfio: Eliminate vfio_container_ioctl(), David Gibson, 2015/11/18