[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 0/4] usb: hotplug support for usb-bot and usb-uas
From: |
Gerd Hoffmann |
Subject: |
[Qemu-devel] [PATCH 0/4] usb: hotplug support for usb-bot and usb-uas |
Date: |
Tue, 26 Jan 2016 11:41:21 +0100 |
Hi,
Composite device hotplug is a long-standing issue in qemu.
PCI multifunction hotplug has been solved recently in a pci-specific
way, by simply not showing hot-plugged functions to the guest until
function #0 is plugged.
So I figured we maybe should check whenever we can apply a simliar trick
to USB composite devices. As the usb subsystem already can hide usb
devices from the guest (used for example with usb-host, in case the
physical usb device is not plugged in the host machine) this turned out
to be surprisingly simple.
So, here we go. Basic idea is the "attached" state becomes settable via
monitor. Now you can create a usb-bot (or usb-uas) device, then attach
the scsi device(s) you want, and when you are done you flip attached to
true to make the composed device visible to the guest.
pleae review & comment,
Gerd
Gerd Hoffmann (4):
usb: make USBDevice->attached bool
usb: add attached property
usb-bot: hotplug support
usb-uas: hotplug support
hw/usb/bus.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++----
hw/usb/dev-storage.c | 8 ++++++--
hw/usb/dev-uas.c | 5 +++++
include/hw/usb.h | 3 ++-
4 files changed, 59 insertions(+), 7 deletions(-)
--
1.8.3.1
- [Qemu-devel] [PATCH 0/4] usb: hotplug support for usb-bot and usb-uas,
Gerd Hoffmann <=