[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH COLO-Frame v14 22/40] COLO failover: Shutdown relate
From: |
zhanghailiang |
Subject: |
[Qemu-devel] [PATCH COLO-Frame v14 22/40] COLO failover: Shutdown related socket fd when do failover |
Date: |
Sat, 6 Feb 2016 17:28:34 +0800 |
If the net connection between COLO's two sides is broken while colo/colo
incoming
thread is blocked in 'read'/'write' socket fd. It will not detect this error
until
connect timeout. It will be a long time.
Here we shutdown all the related socket file descriptors to wake up the blocking
operation in failover BH. Besides, we should close the corresponding file
descriptors
after failvoer BH shutdown them, or there will be an error.
Signed-off-by: zhanghailiang <address@hidden>
Signed-off-by: Li Zhijian <address@hidden>
Reviewed-by: Dr. David Alan Gilbert <address@hidden>
Cc: Dr. David Alan Gilbert <address@hidden>
---
v13:
- Add Reviewed-by tag
- Use semaphore to notify colo/colo incoming loop that failover work is
finished.
v12:
- Shutdown both QEMUFile's fd though they may use the same fd. (Dave's
suggestion)
v11:
- Only shutdown fd for once
---
include/migration/migration.h | 3 +++
migration/colo.c | 43 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 46 insertions(+)
diff --git a/include/migration/migration.h b/include/migration/migration.h
index 14b9f3d..b34def6 100644
--- a/include/migration/migration.h
+++ b/include/migration/migration.h
@@ -112,6 +112,7 @@ struct MigrationIncomingState {
QemuThread colo_incoming_thread;
/* The coroutine we should enter (back) after failover */
Coroutine *migration_incoming_co;
+ QemuSemaphore colo_incoming_sem;
/* See savevm.c */
LoadStateEntry_Head loadvm_handlers;
@@ -175,6 +176,8 @@ struct MigrationState
QSIMPLEQ_HEAD(src_page_requests, MigrationSrcPageRequest)
src_page_requests;
/* The RAMBlock used in the last src_page_request */
RAMBlock *last_req_rb;
+
+ QemuSemaphore colo_sem;
};
void migrate_set_state(int *state, int old_state, int new_state);
diff --git a/migration/colo.c b/migration/colo.c
index 814480c..5c87a8e 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -59,6 +59,18 @@ static void secondary_vm_do_failover(void)
/* recover runstate to normal migration finish state */
autostart = true;
}
+ /*
+ * Make sure colo incoming thread not block in recv or send,
+ * If mis->from_src_file and mis->to_src_file use the same fd,
+ * The second shutdown() will return -1, we ignore this value,
+ * it is harmless.
+ */
+ if (mis->from_src_file) {
+ qemu_file_shutdown(mis->from_src_file);
+ }
+ if (mis->to_src_file) {
+ qemu_file_shutdown(mis->to_src_file);
+ }
old_state = failover_set_state(FAILOVER_STATUS_HANDLING,
FAILOVER_STATUS_COMPLETED);
@@ -67,6 +79,8 @@ static void secondary_vm_do_failover(void)
"secondary VM", old_state);
return;
}
+ /* Notify COLO incoming thread that failover work is finished */
+ qemu_sem_post(&mis->colo_incoming_sem);
/* For Secondary VM, jump to incoming co */
if (mis->migration_incoming_co) {
qemu_coroutine_enter(mis->migration_incoming_co, NULL);
@@ -81,6 +95,18 @@ static void primary_vm_do_failover(void)
migrate_set_state(&s->state, MIGRATION_STATUS_COLO,
MIGRATION_STATUS_COMPLETED);
+ /*
+ * Make sure colo thread no block in recv or send,
+ * The s->rp_state.from_dst_file and s->to_dst_file may use the
+ * same fd, but we still shutdown the fd for twice, it is harmless.
+ */
+ if (s->to_dst_file) {
+ qemu_file_shutdown(s->to_dst_file);
+ }
+ if (s->rp_state.from_dst_file) {
+ qemu_file_shutdown(s->rp_state.from_dst_file);
+ }
+
old_state = failover_set_state(FAILOVER_STATUS_HANDLING,
FAILOVER_STATUS_COMPLETED);
if (old_state != FAILOVER_STATUS_HANDLING) {
@@ -88,6 +114,8 @@ static void primary_vm_do_failover(void)
old_state);
return;
}
+ /* Notify COLO thread that failover work is finished */
+ qemu_sem_post(&s->colo_sem);
}
void colo_do_failover(MigrationState *s)
@@ -383,6 +411,14 @@ out:
qsb_free(buffer);
buffer = NULL;
+ /* Hope this not to be too long to wait here */
+ qemu_sem_wait(&s->colo_sem);
+ qemu_sem_destroy(&s->colo_sem);
+ /*
+ * Must be called after failover BH is completed,
+ * Or the failover BH may shutdown the wrong fd, that
+ * re-used by other thread after we release here.
+ */
if (s->rp_state.from_dst_file) {
qemu_fclose(s->rp_state.from_dst_file);
}
@@ -391,6 +427,7 @@ out:
void migrate_start_colo_process(MigrationState *s)
{
qemu_mutex_unlock_iothread();
+ qemu_sem_init(&s->colo_sem, 0);
migrate_set_state(&s->state, MIGRATION_STATUS_ACTIVE,
MIGRATION_STATUS_COLO);
colo_process_checkpoint(s);
@@ -430,6 +467,8 @@ void *colo_process_incoming_thread(void *opaque)
Error *local_err = NULL;
int ret;
+ qemu_sem_init(&mis->colo_incoming_sem, 0);
+
migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
MIGRATION_STATUS_COLO);
@@ -561,6 +600,10 @@ out:
*/
colo_release_ram_cache();
+ /* Hope this not to be too long to loop here */
+ qemu_sem_wait(&mis->colo_incoming_sem);
+ qemu_sem_destroy(&mis->colo_incoming_sem);
+ /* Must be called after failover BH is completed */
if (mis->to_src_file) {
qemu_fclose(mis->to_src_file);
}
--
1.8.3.1
- [Qemu-devel] [PATCH COLO-Frame v14 17/40] COLO failover: Introduce a new command to trigger a failover, (continued)
- [Qemu-devel] [PATCH COLO-Frame v14 17/40] COLO failover: Introduce a new command to trigger a failover, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 19/40] COLO: Implement failover work for Primary VM, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 25/40] COLO: Update the global runstate after going into colo state, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 33/40] filter-buffer: Accept zero interval, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 24/40] COLO: Process shutdown command for VM in COLO state, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 28/40] migration/savevm: Export two helper functions for savevm process, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 29/40] COLO: Separate the process of saving/loading ram and device state, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 27/40] migration/savevm: Add new helpers to process the different stages of loadvm, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 22/40] COLO failover: Shutdown related socket fd when do failover,
zhanghailiang <=
- [Qemu-devel] [PATCH COLO-Frame v14 26/40] savevm: Introduce two helper functions for save/find loadvm_handlers entry, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 21/40] qmp event: Add COLO_EXIT event to notify users while exited from COLO, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 23/40] COLO failover: Don't do failover during loading VM's state, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 37/40] COLO: enable buffer filters for PVM, zhanghailiang, 2016/02/06
- Re: [Qemu-devel] [PATCH COLO-Frame v14 37/40] COLO: enable buffer filters for PVM, Jason Wang, 2016/02/23