[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH RFC v3 04/15] vfio: ccw: basic implementation fo
From: |
Cornelia Huck |
Subject: |
Re: [Qemu-devel] [PATCH RFC v3 04/15] vfio: ccw: basic implementation for vfio_ccw driver |
Date: |
Tue, 21 Feb 2017 16:43:07 +0100 |
On Tue, 21 Feb 2017 15:36:23 +0800
Dong Jia Shi <address@hidden> wrote:
> * Cornelia Huck <address@hidden> [2017-02-20 19:31:13 +0100]:
>
> > On Fri, 17 Feb 2017 09:29:28 +0100
> > Dong Jia Shi <address@hidden> wrote:
> >
> > > To make vfio support subchannel devices, we need a css driver for
> > > the vfio subchannels. This patch adds a basic vfio-ccw subchannel
> > > driver for this purpose.
> > >
> > > To enable VFIO for vfio-ccw, enable S390_CCW_IOMMU config option
> > > and configure VFIO as required.
> > >
> > > Signed-off-by: Dong Jia Shi <address@hidden>
> > > Acked-by: Pierre Morel <address@hidden>
> > > ---
> > > arch/s390/Kconfig | 10 ++
> > > arch/s390/include/asm/isc.h | 1 +
> > > drivers/iommu/Kconfig | 8 ++
> > > drivers/s390/cio/Makefile | 3 +
> > > drivers/s390/cio/vfio_ccw_drv.c | 262
> > > ++++++++++++++++++++++++++++++++++++
> > > drivers/s390/cio/vfio_ccw_private.h | 25 ++++
> > > 6 files changed, 309 insertions(+)
> > > create mode 100644 drivers/s390/cio/vfio_ccw_drv.c
> > > create mode 100644 drivers/s390/cio/vfio_ccw_private.h
> > > diff --git a/arch/s390/include/asm/isc.h b/arch/s390/include/asm/isc.h
> > > index 68d7d68..8a0b721 100644
> > > --- a/arch/s390/include/asm/isc.h
> > > +++ b/arch/s390/include/asm/isc.h
> > > @@ -16,6 +16,7 @@
> > > #define CONSOLE_ISC 1 /* console I/O subchannel */
> > > #define EADM_SCH_ISC 4 /* EADM subchannels */
> > > #define CHSC_SCH_ISC 7 /* CHSC subchannels */
> > > +#define VFIO_CCW_ISC IO_SCH_ISC /* VFIO-CCW I/O subchannels */
> >
> > This is OK for now, I guess; but do we want to have the isc
> > configurable in the long run? I.e., if a host wants to run its own I/O
> > devices at a different priority than the devices it passes to a guest?
> >
> I think we can keep this as the default value, and provide a driver
> param to customize the ISC value in the future once we need this. I put
> this on my LATER list, or I do it in next version?
This should a per-device knob, I think. It's ok to default to the
normal I/O subchannel isc.
We probably can add this at a later time when we're clear about the
requirements.
>
> > > /* Adapter interrupts. */
> > > #define QDIO_AIRQ_ISC IO_SCH_ISC /* I/O subchannel in qdio mode */
> > > #define PCI_ISC 2 /* PCI I/O subchannels */
> >
> > (...)
> >
> > > diff --git a/drivers/s390/cio/vfio_ccw_drv.c
> > > b/drivers/s390/cio/vfio_ccw_drv.c
> > > new file mode 100644
> > > index 0000000..b068207
> > > --- /dev/null
> > > +++ b/drivers/s390/cio/vfio_ccw_drv.c
> > > @@ -0,0 +1,262 @@
> > > +/*
> > > + * VFIO based Physical Subchannel device driver
> > > + *
> > > + * Copyright IBM Corp. 2017
> > > + *
> > > + * Author(s): Dong Jia Shi <address@hidden>
> > > + * Xiao Feng Ren <address@hidden>
> > > + */
> > > +
> > > +#include <linux/module.h>
> > > +#include <linux/init.h>
> > > +#include <linux/device.h>
> > > +#include <linux/slab.h>
> > > +
> > > +#include <asm/isc.h>
> > > +
> > > +#include "vfio_ccw_private.h"
> > > +
> > > +/*
> > > + * Helpers
> > > + */
> > > +static int vfio_ccw_sch_quiesce(struct subchannel *sch)
> > > +{
> > > + struct vfio_ccw_private *private = dev_get_drvdata(&sch->dev);
> > > + DECLARE_COMPLETION_ONSTACK(completion);
> > > + int iretry, ret = 0;
> > > +
> > > + spin_lock_irq(sch->lock);
> > > + if (!sch->schib.pmcw.ena)
> > > + goto out_unlock;
> > > + ret = cio_disable_subchannel(sch);
> > > + if (ret != -EBUSY)
> > > + goto out_unlock;
> > > +
> > > + do {
> > > + iretry = 255;
> > > +
> > > + ret = cio_cancel_halt_clear(sch, &iretry);
> > > + while (ret == -EBUSY) {
> > > + /*
> > > + * Flushing all I/O and wait the
> >
> > "Flush all I/O and wait for..."
> >
> Ok.
>
> > > + * cancel/halt/clear completion.
> > > + */
> > > + private->completion = &completion;
> > > + spin_unlock_irq(sch->lock);
> > > +
> > > + wait_for_completion(&completion);
> >
> > What happens for cancel? It won't generate an interrupt.
> >
> Right! How about using:
> wait_for_completion_timeout(&completion, 3*HZ);
>
> (I stole '3*HZ' from ccw_device_kill_io.)
That's likely a good place to steal from :)
>
> > > +
> > > + spin_lock_irq(sch->lock);
> > > + private->completion = NULL;
> > > + ret = cio_cancel_halt_clear(sch, &iretry);
> > > + };
> > > +
> > > + ret = cio_disable_subchannel(sch);
> > > + } while (ret == -EBUSY);
> > > +
> > > +out_unlock:
> > > + spin_unlock_irq(sch->lock);
> > > + return ret;
> > > +}
> > > +static int vfio_ccw_sch_probe(struct subchannel *sch)
> > > +{
> > > + struct pmcw *pmcw = &sch->schib.pmcw;
> > > + struct vfio_ccw_private *private;
> > > + int ret;
> > > +
> > > + if (pmcw->qf) {
> > > + dev_warn(&sch->dev, "vfio: ccw: do not support QDIO: %s\n",
> >
> > s/do/does/
> >
> Ok.
>
> > > + dev_name(&sch->dev));
> > > + return -ENOTTY;
> >
> > Is -ENOTTY the right return code here? -EINVAL?
> >
> Ok. Think it again. -EINVAL makes more sense. It's like:
> "hey, I know it's an I/O subchannel, but not the kind we support".
The driver core treats -ENODEV/-ENXIO as "driver matched, but rejected
the device". That's probably better, as we can't filter on device types
when binding at the subchannel level.
>
> > > + }
> > > +
> > > + private = kzalloc(sizeof(*private), GFP_KERNEL | GFP_DMA);
> > > + if (!private)
> > > + return -ENOMEM;
> > > + private->sch = sch;
> > > + dev_set_drvdata(&sch->dev, private);
> > > +
> > > + spin_lock_irq(sch->lock);
> > > + sch->isc = VFIO_CCW_ISC;
> > > + ret = cio_enable_subchannel(sch, (u32)(unsigned long)sch);
> > > + spin_unlock_irq(sch->lock);
> > > + if (ret)
> > > + goto out_free;
> > > +
> > > + ret = sysfs_create_group(&sch->dev.kobj, &vfio_subchannel_attr_group);
> > > + if (ret)
> > > + goto out_disable;
> > > +
> > > + return 0;
> > > +
> > > +out_disable:
> > > + cio_disable_subchannel(sch);
> > > +out_free:
> > > + dev_set_drvdata(&sch->dev, NULL);
> > > + kfree(private);
> > > + return ret;
> > > +}
> > > +
> >
> > (...)
> >
> > > +/**
> > > + * vfio_ccw_sch_event - process subchannel event
> > > + * @sch: subchannel
> > > + * @process: non-zero if function is called in process context
> > > + *
> > > + * An unspecified event occurred for this subchannel. Adjust data
> > > according
> > > + * to the current operational state of the subchannel. Return zero when
> > > the
> > > + * event has been handled sufficiently or -EAGAIN when this function
> > > should
> > > + * be called again in process context.
> > > + */
> > > +static int vfio_ccw_sch_event(struct subchannel *sch, int process)
> > > +{
> > > + unsigned long flags;
> > > +
> > > + spin_lock_irqsave(sch->lock, flags);
> > > + if (!device_is_registered(&sch->dev))
> > > + goto out_unlock;
> > > +
> > > + if (work_pending(&sch->todo_work))
> > > + goto out_unlock;
> > > +
> > > + if (cio_update_schib(sch)) {
> > > + /* Not operational. */
> > > + css_sched_sch_todo(sch, SCH_TODO_UNREG);
> > > +
> > > + /*
> > > + * TODO:
> > > + * Probably we should send the machine check to the guest.
> >
> > Yes, we should do that later on. Will user space notice that the device
> > is gone? (I think crw injection should be done by user space.)
> >
> Currently we lack this mechanism. I think there are many todos here. I
> will investigate latter.
Yes. We just need to keep that in mind for later.
>
> > > + */
> > > + goto out_unlock;
> > > + }
> > > +
> > > +out_unlock:
> > > + spin_unlock_irqrestore(sch->lock, flags);
> > > +
> > > + return 0;
> > > +}
- [Qemu-devel] [PATCH RFC v3 00/15] basic vfio-ccw infrastructure, Dong Jia Shi, 2017/02/17
- [Qemu-devel] [PATCH RFC v3 01/15] s390: cio: introduce cio_cancel_halt_clear, Dong Jia Shi, 2017/02/17
- [Qemu-devel] [PATCH RFC v3 02/15] s390: cio: export more interfaces, Dong Jia Shi, 2017/02/17
- [Qemu-devel] [PATCH RFC v3 03/15] vfio: ccw: define device_api strings, Dong Jia Shi, 2017/02/17
- [Qemu-devel] [PATCH RFC v3 04/15] vfio: ccw: basic implementation for vfio_ccw driver, Dong Jia Shi, 2017/02/17
- [Qemu-devel] [PATCH RFC v3 05/15] vfio: ccw: introduce channel program interfaces, Dong Jia Shi, 2017/02/17
- [Qemu-devel] [PATCH RFC v3 06/15] vfio: ccw: register vfio_ccw to the mediated device framework, Dong Jia Shi, 2017/02/17
- [Qemu-devel] [PATCH RFC v3 08/15] vfio: ccw: handle ccw command request, Dong Jia Shi, 2017/02/17
- [Qemu-devel] [PATCH RFC v3 07/15] vfio: ccw: introduce ccw_io_region, Dong Jia Shi, 2017/02/17
- [Qemu-devel] [PATCH RFC v3 10/15] vfio: ccw: realize VFIO_DEVICE_RESET ioctl, Dong Jia Shi, 2017/02/17
- [Qemu-devel] [PATCH RFC v3 09/15] vfio: ccw: realize VFIO_DEVICE_GET_REGION_INFO ioctl, Dong Jia Shi, 2017/02/17
- [Qemu-devel] [PATCH RFC v3 11/15] vfio: ccw: realize VFIO_DEVICE_G(S)ET_IRQ_INFO ioctls, Dong Jia Shi, 2017/02/17