[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [Qemu devel v5 PATCH 1/5] msf2: Add Smartfusion2 System
From: |
sundeep subbaraya |
Subject: |
Re: [Qemu-devel] [Qemu devel v5 PATCH 1/5] msf2: Add Smartfusion2 System timer |
Date: |
Sat, 24 Jun 2017 17:55:01 +0530 |
Hi Philippe,
On Tue, May 30, 2017 at 6:13 PM, Philippe Mathieu-Daudé <address@hidden>
wrote:
> Hi Subbaraya,
>
> I have some comments, see inlined.
>
>
> On 05/16/2017 12:38 PM, Subbaraya Sundeep wrote:
>
>> Modelled System Timer in Microsemi's Smartfusion2 Soc.
>> Timer has two 32bit down counters and two interrupts.
>>
>> Signed-off-by: Subbaraya Sundeep <address@hidden>
>> ---
>> hw/timer/Makefile.objs | 1 +
>> hw/timer/mss-timer.c | 249 ++++++++++++++++++++++++++++++
>> +++++++++++++
>> include/hw/timer/mss-timer.h | 80 ++++++++++++++
>> 3 files changed, 330 insertions(+)
>> create mode 100644 hw/timer/mss-timer.c
>> create mode 100644 include/hw/timer/mss-timer.h
>>
>> diff --git a/hw/timer/Makefile.objs b/hw/timer/Makefile.objs
>> index dd6f27e..fc4d2da 100644
>> --- a/hw/timer/Makefile.objs
>> +++ b/hw/timer/Makefile.objs
>> @@ -41,3 +41,4 @@ common-obj-$(CONFIG_STM32F2XX_TIMER) +=
>> stm32f2xx_timer.o
>> common-obj-$(CONFIG_ASPEED_SOC) += aspeed_timer.o
>>
>> common-obj-$(CONFIG_SUN4V_RTC) += sun4v-rtc.o
>> +common-obj-$(CONFIG_MSF2) += mss-timer.o
>> diff --git a/hw/timer/mss-timer.c b/hw/timer/mss-timer.c
>> new file mode 100644
>> index 0000000..7041965
>> --- /dev/null
>> +++ b/hw/timer/mss-timer.c
>> @@ -0,0 +1,249 @@
>> +/*
>> + * Block model of System timer present in
>> + * Microsemi's SmartFusion2 and SmartFusion SoCs.
>> + *
>> + * Copyright (c) 2017 Subbaraya Sundeep <address@hidden>.
>> + *
>> + * Permission is hereby granted, free of charge, to any person obtaining
>> a copy
>> + * of this software and associated documentation files (the "Software"),
>> to deal
>> + * in the Software without restriction, including without limitation the
>> rights
>> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or
>> sell
>> + * copies of the Software, and to permit persons to whom the Software is
>> + * furnished to do so, subject to the following conditions:
>> + *
>> + * The above copyright notice and this permission notice shall be
>> included in
>> + * all copies or substantial portions of the Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> EXPRESS OR
>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
>> MERCHANTABILITY,
>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
>> SHALL
>> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
>> OTHER
>> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
>> ARISING FROM,
>> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
>> DEALINGS IN
>> + * THE SOFTWARE.
>> + */
>> +
>> +#include "hw/timer/mss-timer.h"
>> +
>> +#ifndef MSS_TIMER_ERR_DEBUG
>> +#define MSS_TIMER_ERR_DEBUG 0
>> +#endif
>> +
>> +#define DB_PRINT_L(lvl, fmt, args...) do { \
>> + if (MSS_TIMER_ERR_DEBUG >= lvl) { \
>> + qemu_log("%s: " fmt, __func__, ## args); \
>> + } \
>> +} while (0);
>> +
>> +#define DB_PRINT(fmt, args...) DB_PRINT_L(1, fmt, ## args)
>> +
>> +static void timer_update_irq(struct Msf2Timer *st)
>> +{
>> + bool isr, ier;
>> +
>> + isr = !!(st->regs[R_TIM_RIS] & TIMER_RIS_ACK);
>> + ier = !!(st->regs[R_TIM_CTRL] & TIMER_CTRL_INTR);
>> +
>> + qemu_set_irq(st->irq, (ier && isr));
>> +}
>> +
>> +static void timer_update(struct Msf2Timer *st)
>> +{
>> + uint64_t count;
>> +
>> + if (!(st->regs[R_TIM_CTRL] & TIMER_CTRL_ENBL)) {
>> + ptimer_stop(st->ptimer);
>> + return;
>> + }
>> +
>> + count = st->regs[R_TIM_LOADVAL];
>> + ptimer_set_limit(st->ptimer, count, 1);
>> + ptimer_run(st->ptimer, 1);
>> +}
>> +
>> +static uint64_t
>> +timer_read(void *opaque, hwaddr offset, unsigned int size)
>> +{
>> + MSSTimerState *t = opaque;
>> + hwaddr addr;
>> + struct Msf2Timer *st;
>> + uint32_t ret = 0;
>> + int timer = 0;
>> + int isr;
>> + int ier;
>> +
>> + addr = offset >> 2;
>> + /*
>> + * Two independent timers has same base address.
>> + * Based on address passed figure out which timer is being used.
>> + */
>> + if ((addr >= R_TIM1_MAX) && (addr < NUM_TIMERS * R_TIM1_MAX)) {
>> + timer = 1;
>> + addr -= R_TIM1_MAX;
>> + }
>> +
>> + st = &t->timers[timer];
>> +
>> + switch (addr) {
>> + case R_TIM_VAL:
>> + ret = ptimer_get_count(st->ptimer);
>> + break;
>> +
>> + case R_TIM_MIS:
>> + isr = !!(st->regs[R_TIM_RIS] & TIMER_RIS_ACK);
>> + ier = !!(st->regs[R_TIM_CTRL] & TIMER_CTRL_INTR);
>> + ret = ier & isr;
>> + break;
>> +
>> + default:
>> + if (addr < NUM_TIMERS * R_TIM1_MAX) {
>> + ret = st->regs[addr];
>> + } else {
>> + qemu_log_mask(LOG_GUEST_ERROR,
>> + TYPE_MSS_TIMER": 64-bit mode not supported\n");
>> + }
>> + break;
>> + }
>> +
>> + DB_PRINT("timer=%d 0x%" HWADDR_PRIx "=0x%" PRIx32 "\n", timer,
>> offset,
>> + ret);
>> + return ret;
>> +}
>> +
>> +static void
>> +timer_write(void *opaque, hwaddr offset,
>> + uint64_t val64, unsigned int size)
>> +{
>> + MSSTimerState *t = opaque;
>> + hwaddr addr;
>> + struct Msf2Timer *st;
>> + int timer = 0;
>> + uint32_t value = val64;
>> +
>> + addr = offset >> 2;
>> + /*
>> + * Two independent timers has same base address.
>> + * Based on addr passed figure out which timer is being used.
>> + */
>> + if ((addr >= R_TIM1_MAX) && (addr < NUM_TIMERS * R_TIM1_MAX)) {
>> + timer = 1;
>> + addr -= R_TIM1_MAX;
>> + }
>> +
>> + st = &t->timers[timer];
>> +
>> + DB_PRINT("addr=0x%" HWADDR_PRIx " val=0x%" PRIx32 " (timer=%d)\n",
>> offset,
>> + value, timer);
>> +
>> + switch (addr) {
>> + case R_TIM_CTRL:
>> + st->regs[R_TIM_CTRL] = value;
>> + timer_update(st);
>> + break;
>> +
>> + case R_TIM_RIS:
>> + if (value & TIMER_RIS_ACK) {
>> + st->regs[R_TIM_RIS] &= ~TIMER_RIS_ACK;
>> + }
>> + break;
>> +
>> + case R_TIM_LOADVAL:
>> + st->regs[R_TIM_LOADVAL] = value;
>> + if (st->regs[R_TIM_CTRL] & TIMER_CTRL_ENBL) {
>> + timer_update(st);
>> + }
>> + break;
>> +
>> + case R_TIM_BGLOADVAL:
>> + st->regs[R_TIM_BGLOADVAL] = value;
>> + st->regs[R_TIM_LOADVAL] = value;
>> + break;
>> +
>> + case R_TIM_VAL:
>> + case R_TIM_MIS:
>> + break;
>> +
>> + default:
>> + if (addr < NUM_TIMERS * R_TIM1_MAX) {
>> + st->regs[addr] = value;
>> + } else {
>> + qemu_log_mask(LOG_GUEST_ERROR,
>> + TYPE_MSS_TIMER": 64-bit mode not supported\n");
>> + return;
>> + }
>> + break;
>> + }
>> + timer_update_irq(st);
>> +}
>> +
>> +static const MemoryRegionOps timer_ops = {
>> + .read = timer_read,
>> + .write = timer_write,
>> + .endianness = DEVICE_NATIVE_ENDIAN,
>> + .valid = {
>> + .min_access_size = 1,
>> + .max_access_size = 4
>> + }
>> +};
>> +
>> +static void timer_hit(void *opaque)
>> +{
>> + struct Msf2Timer *st = opaque;
>> +
>> + st->regs[R_TIM_RIS] |= TIMER_RIS_ACK;
>> +
>> + if (!(st->regs[R_TIM_CTRL] & TIMER_CTRL_ONESHOT)) {
>> + timer_update(st);
>> + }
>> + timer_update_irq(st);
>> +}
>> +
>> +static void mss_timer_init(Object *obj)
>> +{
>> + MSSTimerState *t = MSS_TIMER(obj);
>> + int i;
>> +
>> + /* Init all the ptimers. */
>> + t->timers = g_malloc0((sizeof t->timers[0]) * NUM_TIMERS);
>> + for (i = 0; i < NUM_TIMERS; i++) {
>> + struct Msf2Timer *st = &t->timers[i];
>> +
>> + st->bh = qemu_bh_new(timer_hit, st);
>> + st->ptimer = ptimer_init(st->bh, PTIMER_POLICY_DEFAULT);
>> + ptimer_set_freq(st->ptimer, t->freq_hz);
>> + sysbus_init_irq(SYS_BUS_DEVICE(obj), &st->irq);
>> + }
>> +
>> + memory_region_init_io(&t->mmio, OBJECT(t), &timer_ops, t,
>> TYPE_MSS_TIMER,
>> + NUM_TIMERS * R_TIM1_MAX * 4);
>> + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &t->mmio);
>> +}
>> +
>> +static Property mss_timer_properties[] = {
>> + /* Libero GUI shows 100Mhz as default for clocks */
>> + DEFINE_PROP_UINT32("clock-frequency", MSSTimerState, freq_hz,
>> + 100 * 1000000),
>> + DEFINE_PROP_END_OF_LIST(),
>> +};
>> +
>> +static void mss_timer_class_init(ObjectClass *klass, void *data)
>> +{
>> + DeviceClass *dc = DEVICE_CLASS(klass);
>> +
>> + dc->props = mss_timer_properties;
>> +}
>> +
>> +static const TypeInfo mss_timer_info = {
>> + .name = TYPE_MSS_TIMER,
>> + .parent = TYPE_SYS_BUS_DEVICE,
>> + .instance_size = sizeof(MSSTimerState),
>> + .instance_init = mss_timer_init,
>> + .class_init = mss_timer_class_init,
>> +};
>> +
>> +static void mss_timer_register_types(void)
>> +{
>> + type_register_static(&mss_timer_info);
>> +}
>> +
>> +type_init(mss_timer_register_types)
>> diff --git a/include/hw/timer/mss-timer.h b/include/hw/timer/mss-timer.h
>> new file mode 100644
>> index 0000000..4caacfd
>> --- /dev/null
>> +++ b/include/hw/timer/mss-timer.h
>> @@ -0,0 +1,80 @@
>> +/*
>> + * Microsemi SmartFusion2 Timer.
>> + *
>> + * Copyright (c) 2017 Subbaraya Sundeep <address@hidden>
>> + *
>> + * Permission is hereby granted, free of charge, to any person obtaining
>> a copy
>> + * of this software and associated documentation files (the "Software"),
>> to deal
>> + * in the Software without restriction, including without limitation the
>> rights
>> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or
>> sell
>> + * copies of the Software, and to permit persons to whom the Software is
>> + * furnished to do so, subject to the following conditions:
>> + *
>> + * The above copyright notice and this permission notice shall be
>> included in
>> + * all copies or substantial portions of the Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> EXPRESS OR
>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
>> MERCHANTABILITY,
>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
>> SHALL
>> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
>> OTHER
>> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
>> ARISING FROM,
>> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
>> DEALINGS IN
>> + * THE SOFTWARE.
>> + */
>> +
>> +#ifndef HW_MSS_TIMER_H
>> +#define HW_MSS_TIMER_H
>> +
>> +#include "qemu/osdep.h"
>> +#include "hw/sysbus.h"
>> +#include "hw/ptimer.h"
>> +#include "sysemu/sysemu.h"
>> +#include "qemu/log.h"
>> +
>> +#define TYPE_MSS_TIMER "mss-timer"
>> +#define MSS_TIMER(obj) OBJECT_CHECK(MSSTimerState, \
>> + (obj), TYPE_MSS_TIMER)
>> +
>> +/*
>> + * There are two 32-bit down counting timers.
>> + * Timers 1 and 2 can be concatenated into a single 64-bit Timer
>> + * that operates either in Periodic mode or in One-shot mode.
>> + * Writing 1 to the TIM64_MODE register bit 0 sets the Timers in 64-bit
>> mode.
>> + * In 64-bit mode, writing to the 32-bit registers has no effect.
>> + * Similarly, in 32-bit mode, writing to the 64-bit mode registers
>> + * has no effect. Only two 32-bit timers are supported currently.
>> + */
>> +#define NUM_TIMERS 2
>> +
>> +#define R_TIM_VAL 0
>> +#define R_TIM_LOADVAL 1
>> +#define R_TIM_BGLOADVAL 2
>> +#define R_TIM_CTRL 3
>> +#define R_TIM_RIS 4
>> +#define R_TIM_MIS 5
>> +#define R_TIM1_MAX 6
>> +
>>
>
> From here ...
>
> +#define TIMER_CTRL_ENBL (1 << 0)
>> +#define TIMER_CTRL_ONESHOT (1 << 1)
>> +#define TIMER_CTRL_INTR (1 << 2)
>> +#define TIMER_RIS_ACK (1 << 0)
>> +#define TIMER_RST_CLR (1 << 6)
>> +#define TIMER_MODE (1 << 0)
>>
>
> .. to here, can go in the .c source file.
>
> I'd also move R_TIM_* to the source, only keeping R_TIM_MAX in this
> header, or also moving it and exposing some TIMER_IO_SIZE of 0x30 instead.
>
Ok will move to .c source file.
>
> +
>> +struct Msf2Timer {
>> + QEMUBH *bh;
>> + ptimer_state *ptimer;
>> +
>> + uint32_t regs[NUM_TIMERS * R_TIM1_MAX];
>>
>
> Beware, you are declaring 2 sets of register for each timer. I think it'd
> be safer to declare these registers once in MSSTimerState, the code would
> get easier.
>
Thanks for catching this. I will use regs[R_TIM1_MAX] so that Msf2Timer
represents
one timer block.
>
> + qemu_irq irq;
>> +};
>> +
>> +typedef struct MSSTimerState {
>> + SysBusDevice parent_obj;
>> +
>> + MemoryRegion mmio;
>> + uint32_t freq_hz;
>> + struct Msf2Timer *timers;
>>
>
> The number of timers is fixed (NUM_TIMERS), so you can declare it here and
> avoid to use g_malloc0() in mss_timer_init(), this will get allocated
> before mss_timer_init() using mss_timer_info.instance_size.
>
> This should simplify a bit.
Yes will remove g_malloc and declare here in MSSTimerState.
Thanks,
Sundeep
>
>
> +} MSSTimerState;
>> +
>> +#endif /* HW_MSS_TIMER_H */
>>
>>
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Qemu-devel] [Qemu devel v5 PATCH 1/5] msf2: Add Smartfusion2 System timer,
sundeep subbaraya <=