[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [RFC 4/5] vfio: use vfio_device_put/vfio_device_get for dev
From: |
Yulei Zhang |
Subject: |
[Qemu-devel] [RFC 4/5] vfio: use vfio_device_put/vfio_device_get for device status save/restore |
Date: |
Mon, 26 Jun 2017 08:53:33 -0000 |
For VFIO pci device status migrate, on the source side with
funtion vfio_device_put to save the following states
1. pci configuration space addr0~addr5
2. pci configuration space msi_addr msi_data
3. pci device status fetch from device driver
And on the target side with funtion vfio_device_get to restore
the same states
1. re-setup the pci bar configuration
2. re-setup the pci device msi configuration
3. restore the pci device status
Signed-off-by: Yulei Zhang <address@hidden>
---
hw/vfio/pci.c | 105 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 104 insertions(+), 1 deletion(-)
diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index 605a473..833cd90 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -2961,18 +2961,121 @@ static void vfio_vm_change_state_handler(void *pv, int
running, RunState state)
vfio_status->flags = running ? VFIO_DEVICE_PCI_START :
VFIO_DEVICE_PCI_STOP;
- ioctl(vdev->vbasedev.fd, VFIO_DEVICE_PCI_STATUS_SET, vfio_status);
+ if (ioctl(vdev->vbasedev.fd, VFIO_DEVICE_PCI_STATUS_SET, vfio_status)) {
+ error_report("vfio: Failed to %s device\n", running ? "start" :
"stop");
+ }
g_free(vfio_status);
}
static int vfio_device_put(QEMUFile *f, void *pv, size_t size, VMStateField
*field,
QJSON *vmdesc)
{
+ VFIOPCIDevice *vdev = pv;
+ PCIDevice *pdev = &vdev->pdev;
+ VFIORegion *region = &vdev->device_state.region;
+ int sz = region->size;
+ uint8_t *buf = NULL;
+ uint32_t msi_cfg, msi_lo, msi_hi, msi_data, bar_cfg, i;
+ bool msi_64bit;
+
+ for (i = 0; i < PCI_ROM_SLOT; i++) {
+ bar_cfg = pci_default_read_config(pdev, PCI_BASE_ADDRESS_0 + i*4, 4);
+ qemu_put_be32(f, bar_cfg);
+ }
+
+ msi_cfg = pci_default_read_config(pdev, pdev->msi_cap + PCI_MSI_FLAGS, 2);
+ msi_64bit = !!(msi_cfg & PCI_MSI_FLAGS_64BIT);
+
+ msi_lo = pci_default_read_config(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_LO,
4);
+ qemu_put_be32(f, msi_lo);
+
+ if (msi_64bit) {
+ msi_hi = pci_default_read_config(pdev, pdev->msi_cap +
PCI_MSI_ADDRESS_HI, 4);
+ qemu_put_be32(f, msi_hi);
+ }
+
+ msi_data = pci_default_read_config(pdev,
+ pdev->msi_cap + (msi_64bit ? PCI_MSI_DATA_64 :
PCI_MSI_DATA_32), 2);
+ qemu_put_be32(f, msi_data);
+
+ buf = g_malloc(sz);
+ if (buf == NULL) {
+ error_report("vfio: Failed to allocate memory for migrate\n");
+ goto exit;
+ }
+
+ if (pread(vdev->vbasedev.fd, buf, sz, region->fd_offset) != sz) {
+ error_report("vfio: Failed to read Device State Region\n");
+ goto exit;
+ }
+
+ qemu_put_buffer(f, buf, sz);
+
+exit:
+ if (buf)
+ g_free(buf);
+
return 0;
}
static int vfio_device_get(QEMUFile *f, void *pv, size_t size, VMStateField
*field)
{
+ VFIOPCIDevice *vdev = pv;
+ PCIDevice *pdev = &vdev->pdev;
+ VFIORegion *region = &vdev->device_state.region;
+ int sz = region->size;
+ uint8_t *buf = NULL;
+ uint32_t ctl, msi_lo, msi_hi, msi_data, bar_cfg, i;
+ bool msi_64bit;
+
+ /* retore pci bar configuration */
+ ctl = pci_default_read_config(pdev, PCI_COMMAND, 2);
+ vfio_pci_write_config(pdev, PCI_COMMAND,
+ ctl & (!(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)), 2);
+ for (i = 0; i < PCI_ROM_SLOT; i++) {
+ bar_cfg = qemu_get_be32(f);
+ vfio_pci_write_config(pdev, PCI_BASE_ADDRESS_0 + i*4, bar_cfg, 4);
+ }
+ vfio_pci_write_config(pdev, PCI_COMMAND,
+ ctl | PCI_COMMAND_IO | PCI_COMMAND_MEMORY, 2);
+
+ /* restore msi configuration */
+ ctl = pci_default_read_config(pdev, pdev->msi_cap + PCI_MSI_FLAGS, 2);
+ msi_64bit = !!(ctl & PCI_MSI_FLAGS_64BIT);
+
+ vfio_pci_write_config(&vdev->pdev,
+ pdev->msi_cap + PCI_MSI_FLAGS,
+ ctl & (!PCI_MSI_FLAGS_ENABLE), 2);
+
+ msi_lo = qemu_get_be32(f);
+ vfio_pci_write_config(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_LO, msi_lo, 4);
+
+ if (msi_64bit) {
+ msi_hi = qemu_get_be32(f);
+ vfio_pci_write_config(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_HI,
msi_hi, 4);
+ }
+ msi_data = qemu_get_be32(f);
+ vfio_pci_write_config(pdev,
+ pdev->msi_cap + (msi_64bit ? PCI_MSI_DATA_64 :
PCI_MSI_DATA_32),
+ msi_data, 2);
+
+ vfio_pci_write_config(&vdev->pdev, pdev->msi_cap + PCI_MSI_FLAGS,
+ ctl | PCI_MSI_FLAGS_ENABLE, 2);
+
+ buf = g_malloc(sz);
+ if (buf == NULL) {
+ error_report("vfio: Failed to allocate memory for migrate\n");
+ return -1;
+ }
+
+ qemu_get_buffer(f, buf, sz);
+ if (pwrite(vdev->vbasedev.fd, buf, sz, region->fd_offset) != sz) {
+ error_report("vfio: Failed to write Device State Region\n");
+ return -1;
+ }
+
+ if (buf)
+ g_free(buf);
return 0;
}
--
2.7.4
- [Qemu-devel] [RFC 4/5] vfio: use vfio_device_put/vfio_device_get for device status save/restore,
Yulei Zhang <=