Make the BASEPRI register banked if v8M security extensions are enabled.
Note that we do not yet implement the functionality of the new
AIRCR.PRIS bit (which allows the effect of the NS copy of BASEPRI to
be restricted).
Signed-off-by: Peter Maydell <address@hidden>
---
target/arm/cpu.h | 14 +++++++++++++-
hw/intc/armv7m_nvic.c | 4 ++--
target/arm/helper.c | 10 ++++++----
target/arm/machine.c | 3 ++-
4 files changed, 23 insertions(+), 8 deletions(-)
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 436ca0d..0c28dfd 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -72,6 +72,18 @@
#define ARMV7M_EXCP_PENDSV 14
#define ARMV7M_EXCP_SYSTICK 15
+/* For M profile, some registers are banked secure vs non-secure;
+ * these are represented as a 2-element array where the first element
+ * is the non-secure copy and the second is the secure copy.
+ * When the CPU does not have implement the security extension then
+ * only the first element is used.
+ * This means that the copy for the current security state can be
+ * accessed via env->registerfield[env->v7m.secure] (whether the security
+ * extension is implemented or not).
+ */
+#define M_REG_NS 0
+#define M_REG_S 1
uint32_t control;
uint32_t ccr; /* Configuration and Control */
uint32_t cfsr; /* Configurable Fault Status */
diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c
index c0dbbad..2a41e5d 100644
--- a/hw/intc/armv7m_nvic.c
+++ b/hw/intc/armv7m_nvic.c
@@ -171,8 +171,8 @@ static inline int nvic_exec_prio(NVICState *s)
running = -1;
} else if (env->v7m.primask) {
running = 0;
- } else if (env->v7m.basepri > 0) {
- running = env->v7m.basepri & nvic_gprio_mask(s);
+ } else if (env->v7m.basepri[env->v7m.secure] > 0) {
+ running = env->v7m.basepri[env->v7m.secure] & nvic_gprio_mask(s);
} else {
running = NVIC_NOEXC_PRIO; /* lower than any possible priority */
}
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 1debebc..1087f19 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -8838,7 +8838,7 @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg)
return env->v7m.primask;
case 17: /* BASEPRI */
case 18: /* BASEPRI_MAX */
- return env->v7m.basepri;
+ return env->v7m.basepri[env->v7m.secure];
case 19: /* FAULTMASK */
return env->v7m.faultmask;
default:
@@ -8898,12 +8898,14 @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t
maskreg, uint32_t val)
env->v7m.primask = val & 1;
break;
case 17: /* BASEPRI */
- env->v7m.basepri = val & 0xff;
+ env->v7m.basepri[env->v7m.secure] = val & 0xff;
break;
case 18: /* BASEPRI_MAX */
val &= 0xff;
- if (val != 0 && (val < env->v7m.basepri || env->v7m.basepri == 0))
- env->v7m.basepri = val;
+ if (val != 0 && (val < env->v7m.basepri[env->v7m.secure]
+ || env->v7m.basepri[env->v7m.secure] == 0)) {
+ env->v7m.basepri[env->v7m.secure] = val;
+ }
break;
case 19: /* FAULTMASK */
env->v7m.faultmask = val & 1;
diff --git a/target/arm/machine.c b/target/arm/machine.c
index 745adae..8476efd 100644
--- a/target/arm/machine.c
+++ b/target/arm/machine.c
@@ -115,7 +115,7 @@ static const VMStateDescription vmstate_m = {
.needed = m_needed,
.fields = (VMStateField[]) {
VMSTATE_UINT32(env.v7m.vecbase, ARMCPU),
- VMSTATE_UINT32(env.v7m.basepri, ARMCPU),
+ VMSTATE_UINT32(env.v7m.basepri[M_REG_NS], ARMCPU),
VMSTATE_UINT32(env.v7m.control, ARMCPU),
VMSTATE_UINT32(env.v7m.ccr, ARMCPU),
VMSTATE_UINT32(env.v7m.cfsr, ARMCPU),
@@ -250,6 +250,7 @@ static const VMStateDescription vmstate_m_security = {
.needed = m_security_needed,
.fields = (VMStateField[]) {
VMSTATE_UINT32(env.v7m.secure, ARMCPU),
+ VMSTATE_UINT32(env.v7m.basepri[M_REG_S], ARMCPU),
VMSTATE_END_OF_LIST()
}
};