[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v6 10/11] authz: add QAuthZPAM object type for a
From: |
Marc-André Lureau |
Subject: |
Re: [Qemu-devel] [PATCH v6 10/11] authz: add QAuthZPAM object type for authorizing using PAM |
Date: |
Thu, 8 Nov 2018 02:23:18 +0400 |
Hi
On Fri, Oct 19, 2018 at 5:47 PM Daniel P. Berrangé <address@hidden> wrote:
>
> From: "Daniel P. Berrange" <address@hidden>
>
> Add an authorization backend that talks to PAM to check whether the user
> identity is allowed. This only uses the PAM account validation facility,
> which is essentially just a check to see if the provided username is permitted
> access. It doesn't use the authentication or session parts of PAM, since
> that's dealt with by the relevant part of QEMU (eg VNC server).
>
> Consider starting QEMU with a VNC server and telling it to use TLS with
> x509 client certificates and configuring it to use an PAM to validate
> the x509 distinguished name. In this example we're telling it to use PAM
> for the QAuthZ impl with a service name of "qemu-vnc"
>
> $ qemu-system-x86_64 \
> -object tls-creds-x509,id=tls0,dir=/home/berrange/security/qemutls,\
> endpoint=server,verify-peer=yes \
> -object authz-pam,id=authz0,service=qemu-vnc \
> -vnc :1,tls-creds=tls0,tls-authz=authz0
>
> This requires an /etc/pam/qemu-vnc file to be created with the auth
> rules. A very simple file based whitelist can be setup using
>
> $ cat > /etc/pam/qemu-vnc <<EOF
> account requisite pam_listfile.so item=user sense=allow
> file=/etc/qemu/vnc.allow
> EOF
>
> The /etc/qemu/vnc.allow file simply contains one username per line. Any
> username not in the file is denied. The usernames in this example are
> the x509 distinguished name from the client's x509 cert.
>
> $ cat > /etc/qemu/vnc.allow <<EOF
> CN=laptop.berrange.com,O=Berrange Home,L=London,ST=London,C=GB
> EOF
>
> More interesting would be to configure PAM to use an LDAP backend, so
> that the QEMU authorization check data can be centralized instead of
> requiring each compute host to have file maintained.
>
> The main limitation with this PAM module is that the rules apply to all
> QEMU instances on the host. Setting up different rules per VM, would
> require creating a separate PAM service name & config file for every
> guest. An alternative approach for the future might be to not pass in
> the plain username to PAM, but instead combine the VM name or UUID with
> the username. This requires further consideration though.
>
> Reviewed-by: Philippe Mathieu-Daudé <address@hidden>
> Tested-by: Philippe Mathieu-Daudé <address@hidden>
> Signed-off-by: Daniel P. Berrange <address@hidden>
> ---
> configure | 37 ++++++++++
> include/authz/pamacct.h | 100 +++++++++++++++++++++++++++
> authz/pamacct.c | 149 ++++++++++++++++++++++++++++++++++++++++
> authz/Makefile.objs | 3 +
> authz/trace-events | 3 +
> qemu-options.hx | 35 ++++++++++
> 6 files changed, 327 insertions(+)
> create mode 100644 include/authz/pamacct.h
> create mode 100644 authz/pamacct.c
>
> diff --git a/configure b/configure
> index 9138af37f8..db35d52e12 100755
> --- a/configure
> +++ b/configure
> @@ -463,6 +463,7 @@ nettle_kdf="no"
> gcrypt=""
> gcrypt_hmac="no"
> gcrypt_kdf="no"
> +auth_pam=""
> vte=""
> virglrenderer=""
> tpm="yes"
> @@ -1361,6 +1362,10 @@ for opt do
> ;;
> --enable-gcrypt) gcrypt="yes"
> ;;
> + --disable-auth-pam) auth_pam="no"
> + ;;
> + --enable-auth-pam) auth_pam="yes"
> + ;;
> --enable-rdma) rdma="yes"
> ;;
> --disable-rdma) rdma="no"
> @@ -1653,6 +1658,7 @@ disabled with --disable-FEATURE, default is enabled if
> available:
> gnutls GNUTLS cryptography support
> nettle nettle cryptography support
> gcrypt libgcrypt cryptography support
> + auth-pam PAM access control
> sdl SDL UI
> --with-sdlabi select preferred SDL ABI 1.2 or 2.0
> gtk gtk UI
> @@ -2876,6 +2882,33 @@ else
> fi
>
>
> +##########################################
> +# PAM probe
> +
> +if test "x$auth_pam" != "no"; then
> + cat > $TMPC <<EOF
> +#include <security/pam_appl.h>
> +#include <stdio.h>
> +int main(void) {
> + const char *service_name = "qemu";
> + const char *user = "frank";
> + const struct pam_conv *pam_conv = NULL;
> + pam_handle_t *pamh = NULL;
> + pam_start(service_name, user, pam_conv, &pamh);
> + return 0;
> +}
> +EOF
> + if compile_prog "" "-lpam" ; then
> + auth_pam=yes
> + else
> + if test "$auth_pam" = "yes"; then
> + feature_not_found "PAM" "Install PAM development package"
> + else
> + auth_pam=no
> + fi
> + fi
> +fi
> +
> ##########################################
> # getifaddrs (for tests/test-io-channel-socket )
>
> @@ -5967,6 +6000,7 @@ echo "libgcrypt kdf $gcrypt_kdf"
> echo "nettle $nettle $(echo_version $nettle $nettle_version)"
> echo "nettle kdf $nettle_kdf"
> echo "libtasn1 $tasn1"
> +echo "PAM $auth_pam"
> echo "curses support $curses"
> echo "virgl support $virglrenderer $(echo_version $virglrenderer
> $virgl_version)"
> echo "curl support $curl"
> @@ -6423,6 +6457,9 @@ fi
> if test "$tasn1" = "yes" ; then
> echo "CONFIG_TASN1=y" >> $config_host_mak
> fi
> +if test "$auth_pam" = "yes" ; then
> + echo "CONFIG_AUTH_PAM=y" >> $config_host_mak
> +fi
> if test "$have_ifaddrs_h" = "yes" ; then
> echo "HAVE_IFADDRS_H=y" >> $config_host_mak
> fi
> diff --git a/include/authz/pamacct.h b/include/authz/pamacct.h
> new file mode 100644
> index 0000000000..d2c0149153
> --- /dev/null
> +++ b/include/authz/pamacct.h
> @@ -0,0 +1,100 @@
> +/*
> + * QEMU PAM authorization driver
> + *
> + * Copyright (c) 2018 Red Hat, Inc.
> + *
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2 of the License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, see
> <http://www.gnu.org/licenses/>.
> + *
> + */
> +
> +#ifndef QAUTHZ_PAM_H__
> +#define QAUTHZ_PAM_H__
> +
> +#include "authz/base.h"
> +
> +
> +#define TYPE_QAUTHZ_PAM "authz-pam"
> +
> +#define QAUTHZ_PAM_CLASS(klass) \
> + OBJECT_CLASS_CHECK(QAuthZPamClass, (klass), \
> + TYPE_QAUTHZ_PAM)
> +#define QAUTHZ_PAM_GET_CLASS(obj) \
> + OBJECT_GET_CLASS(QAuthZPamClass, (obj), \
> + TYPE_QAUTHZ_PAM)
> +#define QAUTHZ_PAM(obj) \
> + INTERFACE_CHECK(QAuthZPam, (obj), \
> + TYPE_QAUTHZ_PAM)
> +
> +typedef struct QAuthZPam QAuthZPam;
> +typedef struct QAuthZPamClass QAuthZPamClass;
> +
> +
> +/**
> + * QAuthZPam:
> + *
> + * This authorization driver provides a PAM mechanism
> + * for granting access by matching user names against a
> + * list of globs. Each match rule has an associated policy
> + * and a catch all policy applies if no rule matches
> + *
> + * To create an instance of this class via QMP:
> + *
> + * {
> + * "execute": "object-add",
> + * "arguments": {
> + * "qom-type": "authz-pam",
> + * "id": "authz0",
> + * "parameters": {
> + * "service": "qemu-vnc-tls"
> + * }
> + * }
> + * }
> + *
> + * The driver only uses the PAM "account" verification
> + * subsystem. The above config would require a config
> + * file /etc/pam.d/qemu-vnc-tls. For a simple file
> + * lookup it would contain
> + *
> + * account requisite pam_listfile.so item=user sense=allow \
> + * file=/etc/qemu/vnc.allow
> + *
> + * The external file would then contain a list of usernames.
> + * If x509 cert was being used as the username, a suitable
> + * entry would match the distinguish name:
> + *
> + * CN=laptop.berrange.com,O=Berrange Home,L=London,ST=London,C=GB
> + *
> + * On the command line it can be created using
> + *
> + * -object authz-pam,id=authz0,service=qemu-vnc-tls
> + *
> + */
> +struct QAuthZPam {
> + QAuthZ parent_obj;
> +
> + char *service;
> +};
> +
> +
> +struct QAuthZPamClass {
> + QAuthZClass parent_class;
> +};
> +
> +
> +QAuthZPam *qauthz_pam_new(const char *id,
> + const char *service,
> + Error **errp);
> +
> +
> +#endif /* QAUTHZ_PAM_H__ */
> diff --git a/authz/pamacct.c b/authz/pamacct.c
> new file mode 100644
> index 0000000000..a070dda217
> --- /dev/null
> +++ b/authz/pamacct.c
> @@ -0,0 +1,149 @@
> +/*
> + * QEMU PAM authorization driver
> + *
> + * Copyright (c) 2018 Red Hat, Inc.
> + *
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2 of the License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, see
> <http://www.gnu.org/licenses/>.
> + *
> + */
> +
> +#include "qemu/osdep.h"
> +#include "authz/pamacct.h"
> +#include "authz/trace.h"
> +#include "qom/object_interfaces.h"
> +
> +#include <security/pam_appl.h>
> +
> +
> +static bool qauthz_pam_is_allowed(QAuthZ *authz,
> + const char *identity,
> + Error **errp)
> +{
> + QAuthZPam *pauthz = QAUTHZ_PAM(authz);
> + const struct pam_conv pam_conversation = { 0 };
> + pam_handle_t *pamh = NULL;
> + int ret;
> +
> + trace_qauthz_pam_check(authz, identity, pauthz->service);
> + ret = pam_start(pauthz->service,
> + identity,
> + &pam_conversation,
> + &pamh);
> + if (ret != PAM_SUCCESS) {
> + error_setg(errp, "Unable to start PAM transaction: %s",
> + pam_strerror(NULL, ret));
> + return false;
> + }
> +
> + ret = pam_acct_mgmt(pamh, PAM_SILENT);
> + if (ret != PAM_SUCCESS) {
> + error_setg(errp, "Unable to authorize user '%s': %s",
> + identity, pam_strerror(pamh, ret));
> + goto cleanup;
> + }
> +
> + cleanup:
> + pam_end(pamh, ret);
> + return ret == PAM_SUCCESS;
> +}
> +
> +
> +static void
> +qauthz_pam_prop_set_service(Object *obj,
> + const char *service,
> + Error **errp G_GNUC_UNUSED)
> +{
> + QAuthZPam *pauthz = QAUTHZ_PAM(obj);
> +
> + g_free(pauthz->service);
> + pauthz->service = g_strdup(service);
> +}
> +
> +
> +static char *
> +qauthz_pam_prop_get_service(Object *obj,
> + Error **errp G_GNUC_UNUSED)
> +{
> + QAuthZPam *pauthz = QAUTHZ_PAM(obj);
> +
> + return g_strdup(pauthz->service);
> +}
> +
> +
> +static void
> +qauthz_pam_complete(UserCreatable *uc, Error **errp)
> +{
> +}
> +
> +
> +static void
> +qauthz_pam_finalize(Object *obj)
> +{
> + QAuthZPam *pauthz = QAUTHZ_PAM(obj);
> +
> + g_free(pauthz->service);
> +}
> +
> +
> +static void
> +qauthz_pam_class_init(ObjectClass *oc, void *data)
> +{
> + UserCreatableClass *ucc = USER_CREATABLE_CLASS(oc);
> + QAuthZClass *authz = QAUTHZ_CLASS(oc);
> +
> + ucc->complete = qauthz_pam_complete;
> + authz->is_allowed = qauthz_pam_is_allowed;
> +
> + object_class_property_add_str(oc, "service",
> + qauthz_pam_prop_get_service,
> + qauthz_pam_prop_set_service,
> + NULL);
> +}
> +
> +
> +QAuthZPam *qauthz_pam_new(const char *id,
> + const char *service,
> + Error **errp)
> +{
> + return QAUTHZ_PAM(
> + object_new_with_props(TYPE_QAUTHZ_PAM,
> + object_get_objects_root(),
> + id, errp,
> + "service", service,
> + NULL));
> +}
> +
> +
> +static const TypeInfo qauthz_pam_info = {
> + .parent = TYPE_QAUTHZ,
> + .name = TYPE_QAUTHZ_PAM,
> + .instance_size = sizeof(QAuthZPam),
> + .instance_finalize = qauthz_pam_finalize,
> + .class_size = sizeof(QAuthZPamClass),
> + .class_init = qauthz_pam_class_init,
> + .interfaces = (InterfaceInfo[]) {
> + { TYPE_USER_CREATABLE },
> + { }
> + }
> +};
> +
> +
> +static void
> +qauthz_pam_register_types(void)
> +{
> + type_register_static(&qauthz_pam_info);
> +}
> +
> +
> +type_init(qauthz_pam_register_types);
> diff --git a/authz/Makefile.objs b/authz/Makefile.objs
> index 8351bf181d..ed7b273596 100644
> --- a/authz/Makefile.objs
> +++ b/authz/Makefile.objs
> @@ -2,3 +2,6 @@ authz-obj-y += base.o
> authz-obj-y += simple.o
> authz-obj-y += list.o
> authz-obj-y += listfile.o
> +authz-obj-$(CONFIG_AUTH_PAM) += pamacct.o
> +
> +pamacct.o-libs = -lpam
> diff --git a/authz/trace-events b/authz/trace-events
> index fb65349a90..72c411927d 100644
> --- a/authz/trace-events
> +++ b/authz/trace-events
> @@ -13,3 +13,6 @@ qauthz_list_default_policy(void *authz, const char
> *identity, int policy) "AuthZ
> # auth/listfile.c
> qauthz_list_file_load(void *authz, const char *filename) "AuthZ file %p load
> filename=%s"
> qauthz_list_file_refresh(void *authz, const char *filename, int success)
> "AuthZ file %p load filename=%s success=%d"
> +
> +# auth/pam.c
> +qauthz_pam_check(void *authz, const char *identity, const char *service)
> "AuthZ PAM %p identity=%s service=%s"
> diff --git a/qemu-options.hx b/qemu-options.hx
> index a1c3e0e59c..a9654b8115 100644
> --- a/qemu-options.hx
> +++ b/qemu-options.hx
> @@ -4447,6 +4447,41 @@ would look like:
> ...
> @end example
>
> address@hidden -object authz-pam,address@hidden,address@hidden
> +
> +Create an authorization object that will control access to network services.
> +
> +The @option{service} parameter provides the name of a PAM service to use
> +for authorization. It requires that a file @code{/etc/pam.d/@var{service}}
> +exist to provide the configuration for the @code{account} subsystem.
> +
> +An example authorization object to validate a TLS x509 distinguished
> +name would look like:
> +
> address@hidden
> + # $QEMU \
> + ...
> + -object authz-simple,id=auth0,service=qemu-vnc
oops, wrong example,
other than that,
Reviewed-by: Marc-André Lureau <address@hidden>
> + ...
> address@hidden example
> +
> +There would then be a corresponding config file for PAM at
> address@hidden/etc/pam.d/qemu-vnc} that contains:
> +
> address@hidden
> +account requisite pam_listfile.so item=user sense=allow \
> + file=/etc/qemu/vnc.allow
> address@hidden example
> +
> +Finally the @code{/etc/qemu/vnc.allow} file would contain
> +the list of x509 distingished names that are permitted
> +access
> +
> address@hidden
> +CN=laptop.example.com,O=Example Home,L=London,ST=London,C=GB
> address@hidden example
> +
> +
> @end table
>
> ETEXI
> --
> 2.17.2
>
>
--
Marc-André Lureau
- Re: [Qemu-devel] [PATCH v6 10/11] authz: add QAuthZPAM object type for authorizing using PAM,
Marc-André Lureau <=