[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v2] q35: fix mmconfig and PCI0._CRS
|
From: |
Michael S. Tsirkin |
|
Subject: |
Re: [Qemu-devel] [PATCH v2] q35: fix mmconfig and PCI0._CRS |
|
Date: |
Tue, 11 Jun 2019 08:06:36 -0400 |
On Tue, Jun 11, 2019 at 01:37:35PM +0200, Paolo Bonzini wrote:
> On 07/06/19 09:34, Gerd Hoffmann wrote:
> > This patch changes the handling of the mmconfig area. Thanks to the
> > pci(e) expander devices we already have the logic to exclude address
> > ranges from PCI0._CRS. We can simply add the mmconfig address range
> > to the list get it excluded as well.
> >
> > With that in place we can go with a fixed pci hole which covers the
> > whole area from the end of (low) ram to the ioapic.
> >
> > This will make the whole logic alot less fragile. No matter where the
> > firmware places the mmconfig xbar, things should work correctly. The
> > guest also gets a bit more PCI address space (seabios boot):
> >
> > # cat /proc/iomem
> > [ ... ]
> > 7ffdd000-7fffffff : reserved
> > 80000000-afffffff : PCI Bus 0000:00 <<-- this is new
> > b0000000-bfffffff : PCI MMCONFIG 0000 [bus 00-ff]
> > b0000000-bfffffff : reserved
> > c0000000-febfffff : PCI Bus 0000:00
> > f8000000-fbffffff : 0000:00:01.0
> > [ ... ]
> >
> > So this is a guest visible change.
> >
> > Cc: László Érsek <address@hidden>
> > Signed-off-by: Gerd Hoffmann <address@hidden>
> > Reviewed-by: Igor Mammedov <address@hidden>
> > ---
> > tests/bios-tables-test-allowed-diff.h | 8 +++++++
> > hw/i386/acpi-build.c | 14 ++++++++++++
> > hw/pci-host/q35.c | 31 +++++++--------------------
> > 3 files changed, 30 insertions(+), 23 deletions(-)
> >
> > diff --git a/tests/bios-tables-test-allowed-diff.h
> > b/tests/bios-tables-test-allowed-diff.h
> > index dfb8523c8bf4..3bbd22c62a3b 100644
> > --- a/tests/bios-tables-test-allowed-diff.h
> > +++ b/tests/bios-tables-test-allowed-diff.h
> > @@ -1 +1,9 @@
> > /* List of comma-separated changed AML files to ignore */
> > +"tests/data/acpi/q35/DSDT",
> > +"tests/data/acpi/q35/DSDT.bridge",
> > +"tests/data/acpi/q35/DSDT.mmio64",
> > +"tests/data/acpi/q35/DSDT.ipmibt",
> > +"tests/data/acpi/q35/DSDT.cphp",
> > +"tests/data/acpi/q35/DSDT.memhp",
> > +"tests/data/acpi/q35/DSDT.numamem",
> > +"tests/data/acpi/q35/DSDT.dimmpxm",
> > diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> > index 85dc1640bc67..8e4f26977619 100644
> > --- a/hw/i386/acpi-build.c
> > +++ b/hw/i386/acpi-build.c
> > @@ -122,6 +122,8 @@ typedef struct FwCfgTPMConfig {
> > uint8_t tpmppi_version;
> > } QEMU_PACKED FwCfgTPMConfig;
> >
> > +static bool acpi_get_mcfg(AcpiMcfgInfo *mcfg);
> > +
> > static void init_common_fadt_data(Object *o, AcpiFadtData *data)
> > {
> > uint32_t io = object_property_get_uint(o, ACPI_PM_PROP_PM_IO_BASE,
> > NULL);
> > @@ -1807,6 +1809,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
> > CrsRangeSet crs_range_set;
> > PCMachineState *pcms = PC_MACHINE(machine);
> > PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(machine);
> > + AcpiMcfgInfo mcfg;
> > uint32_t nr_mem = machine->ram_slots;
> > int root_bus_limit = 0xFF;
> > PCIBus *bus = NULL;
> > @@ -1921,6 +1924,17 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
> > }
> > }
> >
> > + /*
> > + * At this point crs_range_set has all the ranges used by pci
> > + * busses *other* than PCI0. These ranges will be excluded from
> > + * the PCI0._CRS. Add mmconfig to the set so it will be excluded
> > + * too.
> > + */
> > + if (acpi_get_mcfg(&mcfg)) {
> > + crs_range_insert(crs_range_set.mem_ranges,
> > + mcfg.base, mcfg.base + mcfg.size - 1);
> > + }
> > +
> > scope = aml_scope("\\_SB.PCI0");
> > /* build PCI0._CRS */
> > crs = aml_resource_template();
> > diff --git a/hw/pci-host/q35.c b/hw/pci-host/q35.c
> > index 960939f5ed3e..72093320befe 100644
> > --- a/hw/pci-host/q35.c
> > +++ b/hw/pci-host/q35.c
> > @@ -258,15 +258,6 @@ static void q35_host_initfn(Object *obj)
> > object_property_add_link(obj, MCH_HOST_PROP_IO_MEM, TYPE_MEMORY_REGION,
> > (Object **) &s->mch.address_space_io,
> > qdev_prop_allow_set_link_before_realize, 0,
> > NULL);
> > -
> > - /* Leave enough space for the biggest MCFG BAR */
> > - /* TODO: this matches current bios behaviour, but
> > - * it's not a power of two, which means an MTRR
> > - * can't cover it exactly.
> > - */
> > - range_set_bounds(&s->mch.pci_hole,
> > - MCH_HOST_BRIDGE_PCIEXBAR_DEFAULT +
> > MCH_HOST_BRIDGE_PCIEXBAR_MAX,
> > - IO_APIC_DEFAULT_ADDRESS - 1);
> > }
> >
> > static const TypeInfo q35_host_info = {
> > @@ -338,20 +329,6 @@ static void mch_update_pciexbar(MCHPCIState *mch)
> > }
> > addr = pciexbar & addr_mask;
> > pcie_host_mmcfg_update(pehb, enable, addr, length);
> > - /* Leave enough space for the MCFG BAR */
> > - /*
> > - * TODO: this matches current bios behaviour, but it's not a power of
> > two,
> > - * which means an MTRR can't cover it exactly.
> > - */
> > - if (enable) {
> > - range_set_bounds(&mch->pci_hole,
> > - addr + length,
> > - IO_APIC_DEFAULT_ADDRESS - 1);
> > - } else {
> > - range_set_bounds(&mch->pci_hole,
> > - MCH_HOST_BRIDGE_PCIEXBAR_DEFAULT,
> > - IO_APIC_DEFAULT_ADDRESS - 1);
> > - }
> > }
> >
> > /* PAM */
> > @@ -484,6 +461,14 @@ static void mch_update(MCHPCIState *mch)
> > mch_update_pam(mch);
> > mch_update_smram(mch);
> > mch_update_ext_tseg_mbytes(mch);
> > +
> > + /*
> > + * pci hole goes from end-of-low-ram to io-apic.
> > + * mmconfig will be excluded by the dsdt builder.
> > + */
> > + range_set_bounds(&mch->pci_hole,
> > + mch->below_4g_mem_size,
> > + IO_APIC_DEFAULT_ADDRESS - 1);
> > }
> >
> > static int mch_post_load(void *opaque, int version_id)
> >
>
> Queued, thanks.
>
> Paolo
Paolo I would prefer to queue ACPI changes through my tree.
In particular there's a dance with expected tables I am
still working out.
--
MST