[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v4 13/13] vfio: Add trace events in migration co
From: |
Dr. David Alan Gilbert |
Subject: |
Re: [Qemu-devel] [PATCH v4 13/13] vfio: Add trace events in migration code path |
Date: |
Thu, 20 Jun 2019 19:50:00 +0100 |
User-agent: |
Mutt/1.11.4 (2019-03-13) |
* Kirti Wankhede (address@hidden) wrote:
> Signed-off-by: Kirti Wankhede <address@hidden>
> Reviewed-by: Neo Jia <address@hidden>
Thanks, adding traces really helps; however, it might be easier
if you just add them in your previous patches where you're
adding the functions.
Dave
> ---
> hw/vfio/migration.c | 26 ++++++++++++++++++++++++++
> hw/vfio/trace-events | 18 ++++++++++++++++++
> 2 files changed, 44 insertions(+)
>
> diff --git a/hw/vfio/migration.c b/hw/vfio/migration.c
> index 68775b5dec11..70c03f1a969f 100644
> --- a/hw/vfio/migration.c
> +++ b/hw/vfio/migration.c
> @@ -21,6 +21,7 @@
> #include "exec/ramlist.h"
> #include "exec/ram_addr.h"
> #include "pci.h"
> +#include "trace.h"
>
> /*
> * Flags used as delimiter:
> @@ -104,6 +105,7 @@ static int vfio_migration_set_state(VFIODevice *vbasedev,
> uint32_t state)
> }
>
> vbasedev->device_state = state;
> + trace_vfio_migration_set_state(vbasedev->name, state);
> return 0;
> }
>
> @@ -173,6 +175,8 @@ static int vfio_save_buffer(QEMUFile *f, VFIODevice
> *vbasedev)
> qemu_put_be64(f, data_size);
> }
>
> + trace_vfio_save_buffer(vbasedev->name, data_offset, data_size,
> + migration->pending_bytes);
> ret = qemu_file_get_error(f);
>
> return data_size;
> @@ -195,6 +199,7 @@ static int vfio_update_pending(VFIODevice *vbasedev)
> }
>
> migration->pending_bytes = pending_bytes;
> + trace_vfio_update_pending(vbasedev->name, pending_bytes);
> return 0;
> }
>
> @@ -209,6 +214,8 @@ static int vfio_save_device_config_state(QEMUFile *f,
> void *opaque)
> }
> qemu_put_be64(f, VFIO_MIG_FLAG_END_OF_STATE);
>
> + trace_vfio_save_device_config_state(vbasedev->name);
> +
> return qemu_file_get_error(f);
> }
>
> @@ -225,6 +232,7 @@ static int vfio_load_device_config_state(QEMUFile *f,
> void *opaque)
> return -EINVAL;
> }
>
> + trace_vfio_load_device_config_state(vbasedev->name);
> return qemu_file_get_error(f);
> }
>
> @@ -343,6 +351,9 @@ void vfio_get_dirty_page_list(VFIODevice *vbasedev,
> }
> } while (count < pfn_count);
>
> + trace_vfio_get_dirty_page_list(vbasedev->name, start_pfn, pfn_count,
> + page_size);
> +
> dpl_unlock:
> qemu_mutex_unlock(&migration->lock);
> }
> @@ -390,6 +401,7 @@ static int vfio_save_setup(QEMUFile *f, void *opaque)
> return ret;
> }
>
> + trace_vfio_save_setup(vbasedev->name);
> return 0;
> }
>
> @@ -401,6 +413,7 @@ static void vfio_save_cleanup(void *opaque)
> if (migration->region.buffer.mmaps) {
> vfio_region_unmap(&migration->region.buffer);
> }
> + trace_vfio_cleanup(vbasedev->name);
> }
>
> static void vfio_save_pending(QEMUFile *f, void *opaque,
> @@ -424,6 +437,7 @@ static void vfio_save_pending(QEMUFile *f, void *opaque,
> *res_postcopy_only += migration->pending_bytes;
> }
> *res_compatible += 0;
> + trace_vfio_save_pending(vbasedev->name);
> }
>
> static int vfio_save_iterate(QEMUFile *f, void *opaque)
> @@ -451,6 +465,7 @@ static int vfio_save_iterate(QEMUFile *f, void *opaque)
> return ret;
> }
>
> + trace_vfio_save_iterate(vbasedev->name);
> return ret;
> }
>
> @@ -504,6 +519,8 @@ static int vfio_save_complete_precopy(QEMUFile *f, void
> *opaque)
> error_report("Failed to set state STOPPED");
> return ret;
> }
> +
> + trace_vfio_save_complete_precopy(vbasedev->name);
> return ret;
> }
>
> @@ -544,6 +561,9 @@ static int vfio_load_state(QEMUFile *f, void *opaque, int
> version_id)
>
> data = qemu_get_be64(f);
> while (data != VFIO_MIG_FLAG_END_OF_STATE) {
> +
> + trace_vfio_load_state(vbasedev->name, data);
> +
> switch (data) {
> case VFIO_MIG_FLAG_DEV_CONFIG_STATE:
> {
> @@ -627,6 +647,8 @@ static int vfio_load_state(QEMUFile *f, void *opaque, int
> version_id)
> return -EINVAL;
> }
> }
> + trace_vfio_load_state_device_data(vbasedev->name, data_offset,
> + data_size);
> break;
> }
> }
> @@ -668,6 +690,7 @@ static void vfio_vmstate_change(void *opaque, int
> running, RunState state)
> }
>
> vbasedev->vm_running = running;
> + trace_vfio_vmstate_change(vbasedev->name, running);
> }
>
> static void vfio_migration_state_notifier(Notifier *notifier, void *data)
> @@ -676,6 +699,8 @@ static void vfio_migration_state_notifier(Notifier
> *notifier, void *data)
> VFIODevice *vbasedev = container_of(notifier, VFIODevice,
> migration_state);
> int ret;
>
> + trace_vfio_migration_state_notifier(vbasedev->name, s->state);
> +
> switch (s->state) {
> case MIGRATION_STATUS_ACTIVE:
> if (vbasedev->device_state & VFIO_DEVICE_STATE_RUNNING) {
> @@ -758,6 +783,7 @@ int vfio_migration_probe(VFIODevice *vbasedev, Error
> **errp)
> return ret;
> }
> } else {
> + trace_vfio_migration_probe(vbasedev->name, info->index);
> return vfio_migration_init(vbasedev, info);
> }
>
> diff --git a/hw/vfio/trace-events b/hw/vfio/trace-events
> index 8cdc27946cb8..b1f19ae7a806 100644
> --- a/hw/vfio/trace-events
> +++ b/hw/vfio/trace-events
> @@ -143,3 +143,21 @@ vfio_display_edid_link_up(void) ""
> vfio_display_edid_link_down(void) ""
> vfio_display_edid_update(uint32_t prefx, uint32_t prefy) "%ux%u"
> vfio_display_edid_write_error(void) ""
> +
> +# migration.c
> +vfio_migration_set_state(char *name, uint32_t state) " (%s) state %d"
> +vfio_save_buffer(char *name, uint64_t data_offset, uint64_t data_size,
> uint64_t pending) " (%s), Offset 0x%"PRIx64" size 0x%"PRIx64" pending
> 0x%"PRIx64
> +vfio_update_pending(char *name, uint64_t pending) " (%s), pending 0x%"PRIx64
> +vfio_save_device_config_state(char *name) " (%s)"
> +vfio_load_device_config_state(char *name) " (%s)"
> +vfio_get_dirty_page_list(char *name, uint64_t start, uint64_t pfn_count,
> uint64_t page_size) " (%s) start 0x%"PRIx64" pfn_count 0x%"PRIx64 " page size
> 0x%"PRIx64
> +vfio_save_setup(char *name) " (%s)"
> +vfio_cleanup(char *name) " (%s)"
> +vfio_save_pending(char *name) " (%s)"
> +vfio_save_iterate(char *name) " (%s)"
> +vfio_save_complete_precopy(char *name) " (%s)"
> +vfio_load_state(char *name, uint64_t data) " (%s) data 0x%"PRIx64
> +vfio_load_state_device_data(char *name, uint64_t data_offset, uint64_t
> data_size) " (%s), Offset 0x%"PRIx64" size 0x%"PRIx64
> +vfio_vmstate_change(char *name, int running) " (%s) running %d"
> +vfio_migration_state_notifier(char *name, int state) " (%s) state %d"
> +vfio_migration_probe(char *name, uint32_t index) " (%s) Region %d"
> --
> 2.7.0
>
--
Dr. David Alan Gilbert / address@hidden / Manchester, UK
- Re: [Qemu-devel] [PATCH v4 08/13] vfio: Add save state functions to SaveVMHandlers, (continued)
Re: [Qemu-devel] [PATCH v4 08/13] vfio: Add save state functions to SaveVMHandlers, Dr. David Alan Gilbert, 2019/06/28
[Qemu-devel] [PATCH v4 09/13] vfio: Add load state functions to SaveVMHandlers, Kirti Wankhede, 2019/06/20
[Qemu-devel] [PATCH v4 10/13] vfio: Add function to get dirty page list, Kirti Wankhede, 2019/06/20
[Qemu-devel] [PATCH v4 11/13] vfio: Add vfio_listerner_log_sync to mark dirty pages, Kirti Wankhede, 2019/06/20
[Qemu-devel] [PATCH v4 12/13] vfio: Make vfio-pci device migration capable., Kirti Wankhede, 2019/06/20
[Qemu-devel] [PATCH v4 13/13] vfio: Add trace events in migration code path, Kirti Wankhede, 2019/06/20
- Re: [Qemu-devel] [PATCH v4 13/13] vfio: Add trace events in migration code path,
Dr. David Alan Gilbert <=
Re: [Qemu-devel] [PATCH v4 00/13] Add migration support for VFIO device, Yan Zhao, 2019/06/20
- Re: [Qemu-devel] [PATCH v4 00/13] Add migration support for VFIO device, Yan Zhao, 2019/06/20
- Re: [Qemu-devel] [PATCH v4 00/13] Add migration support for VFIO device, Kirti Wankhede, 2019/06/21
- Re: [Qemu-devel] [PATCH v4 00/13] Add migration support for VFIO device, Yan Zhao, 2019/06/21
- Re: [Qemu-devel] [PATCH v4 00/13] Add migration support for VFIO device, Kirti Wankhede, 2019/06/21
- Re: [Qemu-devel] [PATCH v4 00/13] Add migration support for VFIO device, Yan Zhao, 2019/06/21
- Re: [Qemu-devel] [PATCH v4 00/13] Add migration support for VFIO device, Dr. David Alan Gilbert, 2019/06/24
- Re: [Qemu-devel] [PATCH v4 00/13] Add migration support for VFIO device, Yan Zhao, 2019/06/25
- Re: [Qemu-devel] [PATCH v4 00/13] Add migration support for VFIO device, Dr. David Alan Gilbert, 2019/06/28