On Sun, Jan 19, 2020 at 7:44 PM Philippe Mathieu-Daudé
<address@hidden <mailto:address@hidden>> wrote:
On 1/19/20 7:37 PM, Philippe Mathieu-Daudé wrote:
> On 1/19/20 1:50 AM, Niek Linnenbank wrote:
>> The Allwinner H3 System on Chip contains multiple USB 2.0 bus
>> connections which provide software access using the Enhanced
>> Host Controller Interface (EHCI) and Open Host Controller
>> Interface (OHCI) interfaces. This commit adds support for
>> both interfaces in the Allwinner H3 System on Chip.
>>
>> Signed-off-by: Niek Linnenbank <address@hidden
<mailto:address@hidden>>
>> Reviewed-by: Gerd Hoffmann <address@hidden
<mailto:address@hidden>>
>> ---
>> hw/usb/hcd-ehci.h | 1 +
>> include/hw/arm/allwinner-h3.h | 8 ++++++
>> hw/arm/allwinner-h3.c | 52
++++++++++++++++++++++++++++++++---
>> hw/usb/hcd-ehci-sysbus.c | 17 ++++++++++++
>> 4 files changed, 74 insertions(+), 4 deletions(-)
>>
>> diff --git a/hw/usb/hcd-ehci.h b/hw/usb/hcd-ehci.h
>> index 0298238f0b..edb59311c4 100644
>> --- a/hw/usb/hcd-ehci.h
>> +++ b/hw/usb/hcd-ehci.h
>> @@ -342,6 +342,7 @@ typedef struct EHCIPCIState {
>> #define TYPE_SYS_BUS_EHCI "sysbus-ehci-usb"
>> #define TYPE_PLATFORM_EHCI "platform-ehci-usb"
>> #define TYPE_EXYNOS4210_EHCI "exynos4210-ehci-usb"
>> +#define TYPE_AW_H3_EHCI "aw-h3-ehci-usb"
>> #define TYPE_TEGRA2_EHCI "tegra2-ehci-usb"
>> #define TYPE_PPC4xx_EHCI "ppc4xx-ehci-usb"
>> #define TYPE_FUSBH200_EHCI "fusbh200-ehci-usb"
>> diff --git a/include/hw/arm/allwinner-h3.h
>> b/include/hw/arm/allwinner-h3.h
>> index abdc20871a..4f4dcbcd17 100644
>> --- a/include/hw/arm/allwinner-h3.h
>> +++ b/include/hw/arm/allwinner-h3.h
>> @@ -56,6 +56,14 @@ enum {
>> AW_H3_SRAM_A1,
>> AW_H3_SRAM_A2,
>> AW_H3_SRAM_C,
>> + AW_H3_EHCI0,
>> + AW_H3_OHCI0,
>> + AW_H3_EHCI1,
>> + AW_H3_OHCI1,
>> + AW_H3_EHCI2,
>> + AW_H3_OHCI2,
>> + AW_H3_EHCI3,
>> + AW_H3_OHCI3,
>> AW_H3_CCU,
>> AW_H3_PIT,
>> AW_H3_UART0,
>> diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c
>> index 8df8e3e05e..f360625ee9 100644
>> --- a/hw/arm/allwinner-h3.c
>> +++ b/hw/arm/allwinner-h3.c
>> @@ -28,6 +28,7 @@
>> #include "hw/sysbus.h"
>> #include "hw/char/serial.h"
>> #include "hw/misc/unimp.h"
>> +#include "hw/usb/hcd-ehci.h"
>> #include "sysemu/sysemu.h"
>> #include "hw/arm/allwinner-h3.h"
>> @@ -36,6 +37,14 @@ const hwaddr allwinner_h3_memmap[] = {
>> [AW_H3_SRAM_A1] = 0x00000000,
>> [AW_H3_SRAM_A2] = 0x00044000,
>> [AW_H3_SRAM_C] = 0x00010000,
>> + [AW_H3_EHCI0] = 0x01c1a000,
>> + [AW_H3_OHCI0] = 0x01c1a400,
>> + [AW_H3_EHCI1] = 0x01c1b000,
>> + [AW_H3_OHCI1] = 0x01c1b400,
>> + [AW_H3_EHCI2] = 0x01c1c000,
>> + [AW_H3_OHCI2] = 0x01c1c400,
>> + [AW_H3_EHCI3] = 0x01c1d000,
>> + [AW_H3_OHCI3] = 0x01c1d400,
>> [AW_H3_CCU] = 0x01c20000,
>> [AW_H3_PIT] = 0x01c20c00,
>> [AW_H3_UART0] = 0x01c28000,
>> @@ -73,10 +82,10 @@ struct AwH3Unimplemented {
>> { "msgbox", 0x01c17000, 4 * KiB },
>> { "spinlock", 0x01c18000, 4 * KiB },
>> { "usb0-otg", 0x01c19000, 4 * KiB },
>> - { "usb0", 0x01c1a000, 4 * KiB },
>> - { "usb1", 0x01c1b000, 4 * KiB },
>> - { "usb2", 0x01c1c000, 4 * KiB },
>> - { "usb3", 0x01c1d000, 4 * KiB },
>> + { "usb0-phy", 0x01c1a000, 4 * KiB },
>> + { "usb1-phy", 0x01c1b000, 4 * KiB },
>> + { "usb2-phy", 0x01c1c000, 4 * KiB },
>> + { "usb3-phy", 0x01c1d000, 4 * KiB },
>
> As in v3 comment, this can be done in patch #1.
>
> Reviewed-by: Philippe Mathieu-Daudé <address@hidden
<mailto:address@hidden>>
> Tested-by: Philippe Mathieu-Daudé <address@hidden
<mailto:address@hidden>>
Err, this patch is incomplete, when using ./configure
--without-default-devices:
$ qemu-system-arm -M orangepi-pc
qemu-system-arm: invalid accelerator kvm
qemu-system-arm: falling back to tcg
qemu-system-arm: Unknown device 'aw-h3-ehci-usb' for default sysbus
qemu-system-arm: Unknown device 'sysbus-ohci' for default sysbus
Aborted (core dumped)
Thanks for pointing this out, I was not aware at all that the
--without-default-devices option existed.
It's not in the configure --help message also.