Re: [PATCH v4 2/3] acpi:pci-expender-bus: Add pxb support for arm

[Michael S. Tsirkin]

On Tue, Feb 25, 2020 at 10:47:47AM +0100, Philippe Mathieu-Daudé wrote:
> On 2/25/20 2:50 AM, Yubo Miao wrote:
> > From: miaoyubo <address@hidden>
> > 
> > Currently virt machine is not supported by pxb-pcie,
> > and only one main host bridge described in ACPI tables.
> > In this patch,PXB-PCIE is supproted by arm and certain
> 
> Typos: "expander" in subject and "supported" here.
> 
> > resource is allocated for each pxb-pcie in acpi table.
> > The resource for the main host bridge is also reallocated.
> > 
> > Signed-off-by: miaoyubo <address@hidden>
> > ---
> >   hw/arm/virt-acpi-build.c | 115 ++++++++++++++++++++++++++++++++++++---
> >   hw/arm/virt.c            |   3 +
> >   include/hw/arm/virt.h    |   7 +++
> >   3 files changed, 118 insertions(+), 7 deletions(-)
> > 
> > diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> > index 37c34748a6..be1986c60d 100644
> > --- a/hw/arm/virt-acpi-build.c
> > +++ b/hw/arm/virt-acpi-build.c
> > @@ -49,6 +49,8 @@
> >   #include "kvm_arm.h"
> >   #include "migration/vmstate.h"
> > +#include "hw/arm/virt.h"
> > +#include "hw/pci/pci_bus.h"
> >   #define ARM_SPI_BASE 32
> >   static void acpi_dsdt_add_cpus(Aml *scope, int smp_cpus)
> > @@ -266,19 +268,116 @@ static void acpi_dsdt_add_pci_osc(Aml *dev, Aml 
> > *scope)
> >   }
> >   static void acpi_dsdt_add_pci(Aml *scope, const MemMapEntry *memmap,
> > -                              uint32_t irq, bool use_highmem, bool 
> > highmem_ecam)
> > +                              uint32_t irq, bool use_highmem, bool 
> > highmem_ecam,
> > +                              VirtMachineState *vms)
> >   {
> >       int ecam_id = VIRT_ECAM_ID(highmem_ecam);
> > -    Aml *method, *crs;
> > +    Aml *method, *crs, *dev;
> > +    int count = 0;
> >       hwaddr base_mmio = memmap[VIRT_PCIE_MMIO].base;
> >       hwaddr size_mmio = memmap[VIRT_PCIE_MMIO].size;
> >       hwaddr base_pio = memmap[VIRT_PCIE_PIO].base;
> >       hwaddr size_pio = memmap[VIRT_PCIE_PIO].size;
> >       hwaddr base_ecam = memmap[ecam_id].base;
> >       hwaddr size_ecam = memmap[ecam_id].size;
> > +    /*
> > +     * 0x600000 would be enough for pxb device
> > +     * if it is too small, there is no enough space
> > +     * for a pcie device plugged in a pcie-root port
> > +     */
> > +    hwaddr size_addr = 0x600000;
> > +    hwaddr size_io = 0x4000;
> >       int nr_pcie_buses = size_ecam / PCIE_MMCFG_SIZE_MIN;
> > +    PCIBus *bus = VIRT_MACHINE(vms)->bus;
> > +
> > +    if (bus) {
> > +        QLIST_FOREACH(bus, &bus->child, sibling) {
> > +            uint8_t bus_num = pci_bus_num(bus);
> > +            uint8_t numa_node = pci_bus_numa_node(bus);
> > +
> > +            if (!pci_bus_is_root(bus)) {
> > +                continue;
> > +            }
> > +            /*
> > +             * Coded up the MIN of the busNr defined for pxb-pcie,
> > +             * the MIN - 1 would be the MAX bus number for the main
> > +             * host bridge.
> > +             */
> > +            if (bus_num < nr_pcie_buses) {
> > +                nr_pcie_buses = bus_num;
> > +            }
> > +            count++;
> > +            dev = aml_device("PC%.02X", bus_num);
> > +            aml_append(dev, aml_name_decl("_HID", aml_string("PNP0A08")));
> > +            aml_append(dev, aml_name_decl("_CID", aml_string("PNP0A03")));
> > +            aml_append(dev, aml_name_decl("_ADR", aml_int(0)));
> > +            aml_append(dev, aml_name_decl("_CCA", aml_int(1)));
> > +            aml_append(dev, aml_name_decl("_SEG", aml_int(0)));
> > +            aml_append(dev, aml_name_decl("_BBN", aml_int(bus_num)));
> > +            aml_append(dev, aml_name_decl("_UID", aml_int(bus_num)));
> > +            aml_append(dev, aml_name_decl("_STR", aml_unicode("pxb 
> > Device")));
> > +            if (numa_node != NUMA_NODE_UNASSIGNED) {
> > +                method = aml_method("_PXM", 0, AML_NOTSERIALIZED);
> > +                aml_append(method, aml_return(aml_int(numa_node)));
> > +                aml_append(dev, method);
> > +            }
> > +
> > +            acpi_dsdt_add_pci_route_table(dev, scope, irq);
> > +
> > +            method = aml_method("_CBA", 0, AML_NOTSERIALIZED);
> > +            aml_append(method, aml_return(aml_int(base_ecam)));
> > +            aml_append(dev, method);
> > +
> > +            method = aml_method("_CRS", 0, AML_NOTSERIALIZED);
> > +            Aml *rbuf = aml_resource_template();
> > +            aml_append(rbuf,
> > +                       aml_word_bus_number(AML_MIN_FIXED, AML_MAX_FIXED,
> > +                                           AML_POS_DECODE, 0x0000,
> > +                                           bus_num, bus_num + 1, 0x0000,
> > +                                           2));
> > +            aml_append(rbuf,
> > +                       aml_dword_memory(AML_POS_DECODE, AML_MIN_FIXED,
> > +                                        AML_MAX_FIXED, AML_NON_CACHEABLE,
> > +                                        AML_READ_WRITE, 0x0000,
> > +                                        base_mmio + size_mmio -
> > +                                        size_addr * count,
> > +                                        base_mmio + size_mmio - 1 -
> > +                                        size_addr * (count - 1),
> > +                                        0x0000, size_addr));
> > +            aml_append(rbuf,
> > +                       aml_dword_io(AML_MIN_FIXED, AML_MAX_FIXED,
> > +                       AML_POS_DECODE, AML_ENTIRE_RANGE,
> > +                       0x0000, size_pio - size_io * count,
> > +                       size_pio - 1 - size_io * (count - 1),
> > +                       base_pio, size_io));
> > +
> > +            if (use_highmem) {
> > +                hwaddr base_mmio_high = memmap[VIRT_HIGH_PCIE_MMIO].base;
> > +                hwaddr size_mmio_high = memmap[VIRT_HIGH_PCIE_MMIO].size;
> > +
> > +                aml_append(rbuf,
> > +                       aml_qword_memory(AML_POS_DECODE, AML_MIN_FIXED,
> > +                                        AML_MAX_FIXED, AML_NON_CACHEABLE,
> > +                                        AML_READ_WRITE, 0x0000,
> > +                                        base_mmio_high + size_mmio_high -
> > +                                        size_addr * count,
> > +                                        base_mmio_high + size_mmio_high -
> > +                                        1 - size_addr * (count - 1),
> > +                                        0x0000, size_addr));
> > +            }
> > +
> > +            aml_append(method, aml_name_decl("RBUF", rbuf));
> > +            aml_append(method, aml_return(rbuf));
> > +            aml_append(dev, method);
> > +
> > +            acpi_dsdt_add_pci_osc(dev, scope);
> > +
> > +            aml_append(scope, dev);
> > +
> > +        }
> > +    }
> > -    Aml *dev = aml_device("%s", "PCI0");
> > +    dev = aml_device("%s", "PCI0");
> >       aml_append(dev, aml_name_decl("_HID", aml_string("PNP0A08")));
> >       aml_append(dev, aml_name_decl("_CID", aml_string("PNP0A03")));
> >       aml_append(dev, aml_name_decl("_SEG", aml_int(0)));
> > @@ -302,11 +401,13 @@ static void acpi_dsdt_add_pci(Aml *scope, const 
> > MemMapEntry *memmap,
> >       aml_append(rbuf,
> >           aml_dword_memory(AML_POS_DECODE, AML_MIN_FIXED, AML_MAX_FIXED,
> >                            AML_NON_CACHEABLE, AML_READ_WRITE, 0x0000, 
> > base_mmio,
> > -                         base_mmio + size_mmio - 1, 0x0000, size_mmio));
> > +                         base_mmio + size_mmio - 1 - size_addr * count,
> > +                         0x0000, size_mmio - size_addr * count));
> >       aml_append(rbuf,
> >           aml_dword_io(AML_MIN_FIXED, AML_MAX_FIXED, AML_POS_DECODE,
> > -                     AML_ENTIRE_RANGE, 0x0000, 0x0000, size_pio - 1, 
> > base_pio,
> > -                     size_pio));
> > +                     AML_ENTIRE_RANGE, 0x0000, 0x0000,
> > +                     size_pio - 1 - size_io * count, base_pio,
> > +                     size_pio - size_io * count));
> >       if (use_highmem) {
> >           hwaddr base_mmio_high = memmap[VIRT_HIGH_PCIE_MMIO].base;
> > @@ -746,7 +847,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, 
> > VirtMachineState *vms)
> >       acpi_dsdt_add_virtio(scope, &memmap[VIRT_MMIO],
> >                       (irqmap[VIRT_MMIO] + ARM_SPI_BASE), 
> > NUM_VIRTIO_TRANSPORTS);
> >       acpi_dsdt_add_pci(scope, memmap, (irqmap[VIRT_PCIE] + ARM_SPI_BASE),
> > -                      vms->highmem, vms->highmem_ecam);
> > +                      vms->highmem, vms->highmem_ecam, vms);
> >       if (vms->acpi_dev) {
> >           build_ged_aml(scope, "\\_SB."GED_DEVICE,
> >                         HOTPLUG_HANDLER(vms->acpi_dev),
> > diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> > index f788fe27d6..6314928671 100644
> > --- a/hw/arm/virt.c
> > +++ b/hw/arm/virt.c
> > @@ -1246,6 +1246,9 @@ static void create_pcie(VirtMachineState *vms)
> >       }
> >       pci = PCI_HOST_BRIDGE(dev);
> > +
> > +    VIRT_MACHINE(qdev_get_machine())->bus = pci->bus;
> > +
> >       if (pci->bus) {
> >           for (i = 0; i < nb_nics; i++) {
> >               NICInfo *nd = &nd_table[i];
> > diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
> > index 71508bf40c..90f10a1e46 100644
> > --- a/include/hw/arm/virt.h
> > +++ b/include/hw/arm/virt.h
> > @@ -140,6 +140,13 @@ typedef struct {
> >       DeviceState *gic;
> >       DeviceState *acpi_dev;
> >       Notifier powerdown_notifier;
> > +    /*
> > +     * pointer to devices and objects
> > +     * Via going through the bus, all
> > +     * pci devices and related objectes
> 
> Typo "objects", but I don't understand the comment well.

Yes, I don't understand what it says either.

> > +     * could be gained.
> > +     */
> > +    PCIBus *bus;
> >   } VirtMachineState;
> >   #define VIRT_ECAM_ID(high) (high ? VIRT_HIGH_PCIE_ECAM : VIRT_PCIE_ECAM)
> >