qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v4 4/5] target/riscv: add fault-only-first unit stride load


From: LIU Zhiwei
Subject: Re: [PATCH v4 4/5] target/riscv: add fault-only-first unit stride load
Date: Fri, 28 Feb 2020 10:17:32 +0800
User-agent: Mozilla/5.0 (Windows NT 10.0; WOW64; rv:68.0) Gecko/20100101 Thunderbird/68.4.2



On 2020/2/28 4:03, Richard Henderson wrote:
On 2/25/20 2:35 AM, LIU Zhiwei wrote:
+GEN_VEXT_LD_ELEM(vlbff_v_b, int8_t,  int8_t,  H1, ldsb)
+GEN_VEXT_LD_ELEM(vlbff_v_h, int8_t,  int16_t, H2, ldsb)
+GEN_VEXT_LD_ELEM(vlbff_v_w, int8_t,  int32_t, H4, ldsb)
+GEN_VEXT_LD_ELEM(vlbff_v_d, int8_t,  int64_t, H8, ldsb)
+GEN_VEXT_LD_ELEM(vlhff_v_h, int16_t, int16_t, H2, ldsw)
+GEN_VEXT_LD_ELEM(vlhff_v_w, int16_t, int32_t, H4, ldsw)
+GEN_VEXT_LD_ELEM(vlhff_v_d, int16_t, int64_t, H8, ldsw)
+GEN_VEXT_LD_ELEM(vlwff_v_w, int32_t, int32_t, H4, ldl)
+GEN_VEXT_LD_ELEM(vlwff_v_d, int32_t, int64_t, H8, ldl)
+GEN_VEXT_LD_ELEM(vleff_v_b, int8_t,  int8_t,  H1, ldsb)
+GEN_VEXT_LD_ELEM(vleff_v_h, int16_t, int16_t, H2, ldsw)
+GEN_VEXT_LD_ELEM(vleff_v_w, int32_t, int32_t, H4, ldl)
+GEN_VEXT_LD_ELEM(vleff_v_d, int64_t, int64_t, H8, ldq)
+GEN_VEXT_LD_ELEM(vlbuff_v_b, uint8_t,  uint8_t,  H1, ldub)
+GEN_VEXT_LD_ELEM(vlbuff_v_h, uint8_t,  uint16_t, H2, ldub)
+GEN_VEXT_LD_ELEM(vlbuff_v_w, uint8_t,  uint32_t, H4, ldub)
+GEN_VEXT_LD_ELEM(vlbuff_v_d, uint8_t,  uint64_t, H8, ldub)
+GEN_VEXT_LD_ELEM(vlhuff_v_h, uint16_t, uint16_t, H2, lduw)
+GEN_VEXT_LD_ELEM(vlhuff_v_w, uint16_t, uint32_t, H4, lduw)
+GEN_VEXT_LD_ELEM(vlhuff_v_d, uint16_t, uint64_t, H8, lduw)
+GEN_VEXT_LD_ELEM(vlwuff_v_w, uint32_t, uint32_t, H4, ldl)
+GEN_VEXT_LD_ELEM(vlwuff_v_d, uint32_t, uint64_t, H8, ldl)
We definitely should not have a 3rd copy of these.
Yes, I will remove it by add a parameter to GEN_VEXT_LDFF.


+        if (i == 0) {
+            probe_read_access(env, addr, nf * msz, ra);
+        } else {
+            /* if it triggles an exception, no need to check watchpoint */
triggers.
Yes.

+            offset = -(addr | TARGET_PAGE_MASK);
+            remain = nf * msz;
+            while (remain > 0) {
+                host = tlb_vaddr_to_host(env, addr, MMU_DATA_LOAD, mmuidx);
+                if (host) {
+#ifdef CONFIG_USER_ONLY
+                    if (page_check_range(addr, nf * msz, PAGE_READ) < 0) {
+                        vl = i;
+                        goto ProbeSuccess;
+                    }
+#else
+                    probe_read_access(env, addr, nf * msz, ra);
+#endif
Good job finding all of the corner cases.  I should invent a new cputlb
function that handles this better.  For now, this is the best we can do.
That will be better.

I learn a lot from SVE and some S390  code. Thanks a lot.

Best Regards,
Zhiwei

r~




reply via email to

[Prev in Thread] Current Thread [Next in Thread]