[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH 4/4] net/colo: Match is-enabled probe to tracepoint
From: |
Roman Bolshakov |
Subject: |
Re: [PATCH 4/4] net/colo: Match is-enabled probe to tracepoint |
Date: |
Thu, 16 Jul 2020 13:55:35 +0300 |
On Thu, Jul 16, 2020 at 09:51:27AM +0100, Daniel P. Berrangé wrote:
> Adding Stefan to CC as the trace maintainer.
>
> On Thu, Jul 16, 2020 at 11:17:54AM +0300, Roman Bolshakov wrote:
> > Build of QEMU with dtrace fails on macOS:
> >
> > LINK x86_64-softmmu/qemu-system-x86_64
> > error: probe colo_compare_miscompare doesn't exist
> > error: Could not register probes
> > ld: error creating dtrace DOF section for architecture x86_64
> >
> > The reason of the error is explained by Adam Leventhal [1]:
> >
> > Note that is-enabled probes don't have the stability magic so I'm not
> > sure how things would work if only is-enabled probes were used.
> >
> > net/colo code uses is-enabled probes to determine if other probes should
> > be used but colo_compare_miscompare itself is not used explicitly.
> > Linker doesn't include the symbol and build fails.
> >
> > The issue can be resolved if is-enabled probe matches the actual trace
> > point that is used inside the test.
> >
> > 1. http://markmail.org/message/6grq2ygr5nwdwsnb
> >
> > Fixes: f4b618360e ("colo-compare: add TCP, UDP, ICMP packet comparison")
> > Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
> > Cc: Cameron Esfahani <dirty@apple.com>
> > Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
> > ---
> > net/colo-compare.c | 12 +++++++-----
> > net/filter-rewriter.c | 8 ++++++--
> > net/trace-events | 2 --
> > 3 files changed, 13 insertions(+), 9 deletions(-)
> >
> > diff --git a/net/colo-compare.c b/net/colo-compare.c
> > index 398b7546ff..9525ed703b 100644
> > --- a/net/colo-compare.c
> > +++ b/net/colo-compare.c
> > @@ -327,7 +327,7 @@ static int colo_compare_packet_payload(Packet *ppkt,
> > uint16_t len)
> >
> > {
> > - if (trace_event_get_state_backends(TRACE_COLO_COMPARE_MISCOMPARE)) {
> > + if (trace_event_get_state_backends(TRACE_COLO_COMPARE_IP_INFO)) {
> > char pri_ip_src[20], pri_ip_dst[20], sec_ip_src[20],
> > sec_ip_dst[20];
> >
> > strcpy(pri_ip_src, inet_ntoa(ppkt->ip->ip_src));
> > @@ -492,7 +492,7 @@ sec:
> > g_queue_push_head(&conn->primary_list, ppkt);
> > g_queue_push_head(&conn->secondary_list, spkt);
> >
> > - if (trace_event_get_state_backends(TRACE_COLO_COMPARE_MISCOMPARE))
> > {
> > + if (trace_event_get_state_backends(TRACE_COLO_COMPARE_TCP_INFO)) {
> > qemu_hexdump((char *)ppkt->data, stderr,
> > "colo-compare ppkt", ppkt->size);
> > qemu_hexdump((char *)spkt->data, stderr,
>
> Not your fault, as this problem is pre-existing, but IMHO this block of code
> is simply broken by design. It is checking a trace event enablement state,
> and then not emitting any trace event, but instead dumping info to stderr.
> This is mis-use of the trace framework, and changing the event name fixes
> your immediate macOS bug but the code is still flawed.
>
> Basically it is using the trace framework as a way to dynamically turn on /
> off general debugging information.
>
> I'm not quite sure what todo to fix it, but I don't think it should be wrapped
> in any trace_event_get_state_backends() call at all.
>
> The simplest immediate option I think is to change it to be a compile time
> debug
>
> // #define DEBUG_COLO_PACKETS
>
> and then use
>
> #ifdef DEBUG_COLO_PACKETS
> qemu_hexdump(...)
> #endif
>
> and then leave it upto the maintainer to come up with a more advanced
> solution if they want to make it runtime configurable again, but not
> abusing the trace framework.
>
Hi Daniel,
It makes sense, compile-time define works better because the trace data
doesn't go into a trace point. I'll use that approach in v2.
> > @@ -533,7 +533,8 @@ static int colo_packet_compare_udp(Packet *spkt, Packet
> > *ppkt)
> > ppkt->size - offset)) {
> > trace_colo_compare_udp_miscompare("primary pkt size", ppkt->size);
> > trace_colo_compare_udp_miscompare("Secondary pkt size",
> > spkt->size);
> > - if (trace_event_get_state_backends(TRACE_COLO_COMPARE_MISCOMPARE))
> > {
> > + if (trace_event_get_state_backends(
> > + TRACE_COLO_COMPARE_UDP_MISCOMPARE)) {
> > qemu_hexdump((char *)ppkt->data, stderr, "colo-compare pri
> > pkt",
> > ppkt->size);
> > qemu_hexdump((char *)spkt->data, stderr, "colo-compare sec
> > pkt",
>
> Same brokenness
>
> > @@ -576,7 +577,8 @@ static int colo_packet_compare_icmp(Packet *spkt,
> > Packet *ppkt)
> > ppkt->size);
> > trace_colo_compare_icmp_miscompare("Secondary pkt size",
> > spkt->size);
> > - if (trace_event_get_state_backends(TRACE_COLO_COMPARE_MISCOMPARE))
> > {
> > + if (trace_event_get_state_backends(
> > + TRACE_COLO_COMPARE_ICMP_MISCOMPARE)) {
> > qemu_hexdump((char *)ppkt->data, stderr, "colo-compare pri
> > pkt",
> > ppkt->size);
> > qemu_hexdump((char *)spkt->data, stderr, "colo-compare sec
> > pkt",
>
> Same brokenness
>
> > @@ -597,7 +599,7 @@ static int colo_packet_compare_other(Packet *spkt,
> > Packet *ppkt)
> > uint16_t offset = ppkt->vnet_hdr_len;
> >
> > trace_colo_compare_main("compare other");
> > - if (trace_event_get_state_backends(TRACE_COLO_COMPARE_MISCOMPARE)) {
> > + if (trace_event_get_state_backends(TRACE_COLO_COMPARE_IP_INFO)) {
> > char pri_ip_src[20], pri_ip_dst[20], sec_ip_src[20],
> > sec_ip_dst[20];
> >
> > strcpy(pri_ip_src, inet_ntoa(ppkt->ip->ip_src));
> > diff --git a/net/filter-rewriter.c b/net/filter-rewriter.c
> > index 1aaad101b6..ff04165cc4 100644
> > --- a/net/filter-rewriter.c
> > +++ b/net/filter-rewriter.c
> > @@ -76,7 +76,9 @@ static int handle_primary_tcp_pkt(RewriterState *rf,
> > struct tcp_hdr *tcp_pkt;
> >
> > tcp_pkt = (struct tcp_hdr *)pkt->transport_header;
> > - if (trace_event_get_state_backends(TRACE_COLO_FILTER_REWRITER_DEBUG)) {
> > + if
> > (trace_event_get_state_backends(TRACE_COLO_FILTER_REWRITER_PKT_INFO) ||
> > + trace_event_get_state_backends(
> > + TRACE_COLO_FILTER_REWRITER_CONN_OFFSET)) {
> > trace_colo_filter_rewriter_pkt_info(__func__,
> > inet_ntoa(pkt->ip->ip_src), inet_ntoa(pkt->ip->ip_dst),
> > ntohl(tcp_pkt->th_seq), ntohl(tcp_pkt->th_ack),
>
> Since there are two separate trace events here, each should be wrapped with
> its own check. IOW, two completely separate if (...) trace(..); blocks
>
Agreed, I'll do that, thanks!
> > @@ -180,7 +182,9 @@ static int handle_secondary_tcp_pkt(RewriterState *rf,
> >
> > tcp_pkt = (struct tcp_hdr *)pkt->transport_header;
> >
> > - if (trace_event_get_state_backends(TRACE_COLO_FILTER_REWRITER_DEBUG)) {
> > + if
> > (trace_event_get_state_backends(TRACE_COLO_FILTER_REWRITER_PKT_INFO) ||
> > + trace_event_get_state_backends(
> > + TRACE_COLO_FILTER_REWRITER_CONN_OFFSET)) {
> > trace_colo_filter_rewriter_pkt_info(__func__,
> > inet_ntoa(pkt->ip->ip_src), inet_ntoa(pkt->ip->ip_dst),
> > ntohl(tcp_pkt->th_seq), ntohl(tcp_pkt->th_ack),
>
> Same here.
>
>
Best regards,
Roman
- [PATCH 0/4] Add dtrace support on macOS, Roman Bolshakov, 2020/07/16
- [PATCH 1/4] scripts/tracetool: Fix dtrace generation for macOS, Roman Bolshakov, 2020/07/16
- [PATCH 2/4] scripts/tracetool: Use void pointer for vcpu, Roman Bolshakov, 2020/07/16
- [PATCH 3/4] build: Don't make object files for dtrace on macOS, Roman Bolshakov, 2020/07/16
- [PATCH 4/4] net/colo: Match is-enabled probe to tracepoint, Roman Bolshakov, 2020/07/16
- Re: [PATCH 0/4] Add dtrace support on macOS, Daniel P . Berrangé, 2020/07/16