[PATCH 114/143] meson: convert hw/dma

[Paolo Bonzini]

From: Marc-André Lureau <marcandre.lureau@redhat.com>

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/Makefile.objs     |  1 -
 hw/dma/Makefile.objs | 16 ----------------
 hw/dma/meson.build   | 15 +++++++++++++++
 hw/meson.build       |  1 +
 4 files changed, 16 insertions(+), 17 deletions(-)
 delete mode 100644 hw/dma/Makefile.objs
 create mode 100644 hw/dma/meson.build

diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index c04dfe5..26917a4 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -7,7 +7,6 @@ devices-dirs-y += block/
 devices-dirs-y += char/
 devices-dirs-y += cpu/
 devices-dirs-y += display/
-devices-dirs-y += dma/
 endif
 
 common-obj-y += $(devices-dirs-y)
diff --git a/hw/dma/Makefile.objs b/hw/dma/Makefile.objs
deleted file mode 100644
index f4b1cfe..0000000
--- a/hw/dma/Makefile.objs
+++ /dev/null
@@ -1,16 +0,0 @@
-common-obj-$(CONFIG_PUV3) += puv3_dma.o
-common-obj-$(CONFIG_RC4030) += rc4030.o
-common-obj-$(CONFIG_PL080) += pl080.o
-common-obj-$(CONFIG_PL330) += pl330.o
-common-obj-$(CONFIG_I82374) += i82374.o
-common-obj-$(CONFIG_I8257) += i8257.o
-common-obj-$(CONFIG_XILINX_AXI) += xilinx_axidma.o
-common-obj-$(CONFIG_ZYNQ_DEVCFG) += xlnx-zynq-devcfg.o
-common-obj-$(CONFIG_ETRAXFS) += etraxfs_dma.o
-common-obj-$(CONFIG_STP2000) += sparc32_dma.o
-common-obj-$(CONFIG_XLNX_ZYNQMP_ARM) += xlnx_dpdma.o
-common-obj-$(CONFIG_XLNX_ZYNQMP_ARM) += xlnx-zdma.o
-
-common-obj-$(CONFIG_OMAP) += omap_dma.o soc_dma.o
-common-obj-$(CONFIG_PXA2XX) += pxa2xx_dma.o
-common-obj-$(CONFIG_RASPI) += bcm2835_dma.o
diff --git a/hw/dma/meson.build b/hw/dma/meson.build
new file mode 100644
index 0000000..ff5bb37
--- /dev/null
+++ b/hw/dma/meson.build
@@ -0,0 +1,15 @@
+softmmu_ss.add(when: 'CONFIG_PUV3', if_true: files('puv3_dma.c'))
+softmmu_ss.add(when: 'CONFIG_RC4030', if_true: files('rc4030.c'))
+softmmu_ss.add(when: 'CONFIG_PL080', if_true: files('pl080.c'))
+softmmu_ss.add(when: 'CONFIG_PL330', if_true: files('pl330.c'))
+softmmu_ss.add(when: 'CONFIG_I82374', if_true: files('i82374.c'))
+softmmu_ss.add(when: 'CONFIG_I8257', if_true: files('i8257.c'))
+softmmu_ss.add(when: 'CONFIG_XILINX_AXI', if_true: files('xilinx_axidma.c'))
+softmmu_ss.add(when: 'CONFIG_ZYNQ_DEVCFG', if_true: 
files('xlnx-zynq-devcfg.c'))
+softmmu_ss.add(when: 'CONFIG_ETRAXFS', if_true: files('etraxfs_dma.c'))
+softmmu_ss.add(when: 'CONFIG_STP2000', if_true: files('sparc32_dma.c'))
+softmmu_ss.add(when: 'CONFIG_XLNX_ZYNQMP_ARM', if_true: files('xlnx_dpdma.c'))
+softmmu_ss.add(when: 'CONFIG_XLNX_ZYNQMP_ARM', if_true: files('xlnx-zdma.c'))
+softmmu_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_dma.c', 'soc_dma.c'))
+softmmu_ss.add(when: 'CONFIG_PXA2XX', if_true: files('pxa2xx_dma.c'))
+softmmu_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_dma.c'))
diff --git a/hw/meson.build b/hw/meson.build
index 52577c3..96da0bb 100644
--- a/hw/meson.build
+++ b/hw/meson.build
@@ -1,4 +1,5 @@
 subdir('core')
+subdir('dma')
 subdir('gpio')
 subdir('hyperv')
 subdir('i2c')
-- 
1.8.3.1