Re: [PATCH V6 00/27] Live Update

[Steven Sistare]

Hi Zheng, testing aarch64 is on our todo list. We will run this case and try to 
reproduce the failure.  Thanks for the report.

- Steve

On 8/21/2021 4:54 AM, Zheng Chuan wrote:
> Hi, steve
> 
> It seems the VM will stuck after cpr-load on AArch64 environment？
> 
> My AArch64 environment and test steps:
> 1. linux kernel: 5.14-rc6
> 2. QEMU version: v6.1.0-rc2 (patch your patchset), and configure with 
> `../configure --target-list=aarch64-softmmu --disable-werror --enable-kvm` 4. 
> Steps to live update:
> # ./build/aarch64-softmmu/qemu-system-aarch64 -machine 
> virt,accel=kvm,gic-version=3,memfd-alloc=on -nodefaults -cpu host -m 2G -smp 
> 1 -drive 
> file=/usr/share/edk2/aarch64/QEMU_EFI-pflash.raw,if=pflash,format=raw,readonly=on
> -drive file=<path/to/vm.qcow2>,format=qcow2,if=none,id=drive_image1
> -device virtio-blk-pci,id=image1,drive=drive_image1 -vnc :10 -device
> virtio-gpu,id=video0 -device piix3-usb-uhci,id=usb -device
> usb-tablet,id=input0,bus=usb.0,port=1 -device
> usb-kbd,id=input1,bus=usb.0,port=2 -monitor stdio
> (qemu) cpr-save /tmp/qemu.save restart
> (qemu) cpr-exec ./build/aarch64-softmmu/qemu-system-aarch64 -machine 
> virt,accel=kvm,gic-version=3,memfd-alloc=on -nodefaults -cpu host -m 2G -smp 
> 1 -drive 
> file=/usr/share/edk2/aarch64/QEMU_EFI-pflash.raw,if=pflash,format=raw,readonly=on
> -drive file=<path/to/vm.qcow2>,format=qcow2,if=none,id=drive_image1
> -device virtio-blk-pci,id=image1,drive=drive_image1 -vnc :10 -device
> virtio-gpu,id=video0 -device piix3-usb-uhci,id=usb -device
> usb-tablet,id=input0,bus=usb.0,port=1 -device
> usb-kbd,id=input1,bus=usb.0,port=2 -monitor stdio -S
> (qemu) QEMU 6.0.92 monitor - type 'help' for more information
> (qemu) cpr-load /tmp/qemu.save
> 
> Does I miss something?
> 
> On 2021/8/7 5:43, Steve Sistare wrote:
>> Provide the cpr-save, cpr-exec, and cpr-load commands for live update.
>> These save and restore VM state, with minimal guest pause time, so that
>> qemu may be updated to a new version in between.
>>
>> cpr-save stops the VM and saves vmstate to an ordinary file.  It supports
>> any type of guest image and block device, but the caller must not modify
>> guest block devices between cpr-save and cpr-load.  It supports two modes:
>> reboot and restart.
>>
>> In reboot mode, the caller invokes cpr-save and then terminates qemu.
>> The caller may then update the host kernel and system software and reboot.
>> The caller resumes the guest by running qemu with the same arguments as the
>> original process and invoking cpr-load.  To use this mode, guest ram must be
>> mapped to a persistent shared memory file such as /dev/dax0.0, or /dev/shm
>> PKRAM as proposed in 
>> https://lore.kernel.org/lkml/1617140178-8773-1-git-send-email-anthony.yznaga@oracle.com.
>>
>> The reboot mode supports vfio devices if the caller first suspends the
>> guest, such as by issuing guest-suspend-ram to the qemu guest agent.  The
>> guest drivers' suspend methods flush outstanding requests and re-initialize
>> the devices, and thus there is no device state to save and restore.
>>
>> Restart mode preserves the guest VM across a restart of the qemu process.
>> After cpr-save, the caller passes qemu command-line arguments to cpr-exec,
>> which directly exec's the new qemu binary.  The arguments must include -S
>> so new qemu starts in a paused state and waits for the cpr-load command.
>> The restart mode supports vfio devices by preserving the vfio container,
>> group, device, and event descriptors across the qemu re-exec, and by
>> updating DMA mapping virtual addresses using VFIO_DMA_UNMAP_FLAG_VADDR and
>> VFIO_DMA_MAP_FLAG_VADDR as defined in 
>> https://lore.kernel.org/kvm/1611939252-7240-1-git-send-email-steven.sistare@oracle.com/
>> and integrated in Linux kernel 5.12.
>>
>> To use the restart mode, qemu must be started with the memfd-alloc option,
>> which allocates guest ram using memfd_create.  The memfd's are saved to
>> the environment and kept open across exec, after which they are found from
>> the environment and re-mmap'd.  Hence guest ram is preserved in place,
>> albeit with new virtual addresses in the qemu process.
>>
>> The caller resumes the guest by invoking cpr-load, which loads state from
>> the file. If the VM was running at cpr-save time, then VM execution resumes.
>> If the VM was suspended at cpr-save time (reboot mode), then the caller must
>> issue a system_wakeup command to resume.
>>
>> The first patches add reboot mode:
>>   - memory: qemu_check_ram_volatile
>>   - migration: fix populate_vfio_info
>>   - migration: qemu file wrappers
>>   - migration: simplify savevm
>>   - vl: start on wakeup request
>>   - cpr: reboot mode
>>   - cpr: reboot HMP interfaces
>>
>> The next patches add restart mode:
>>   - memory: flat section iterator
>>   - oslib: qemu_clear_cloexec
>>   - machine: memfd-alloc option
>>   - qapi: list utility functions
>>   - vl: helper to request re-exec
>>   - cpr: preserve extra state
>>   - cpr: restart mode
>>   - cpr: restart HMP interfaces
>>   - hostmem-memfd: cpr for memory-backend-memfd
>>
>> The next patches add vfio support for restart mode:
>>   - pci: export functions for cpr
>>   - vfio-pci: refactor for cpr
>>   - vfio-pci: cpr part 1 (fd and dma)
>>   - vfio-pci: cpr part 2 (msi)
>>   - vfio-pci: cpr part 3 (intx)
>>
>> The next patches preserve various descriptor-based backend devices across
>> cprexec:
>>   - vhost: reset vhost devices for cpr
>>   - chardev: cpr framework
>>   - chardev: cpr for simple devices
>>   - chardev: cpr for pty
>>   - chardev: cpr for sockets
>>   - cpr: only-cpr-capable option
>>
>> Here is an example of updating qemu from v4.2.0 to v4.2.1 using
>> restart mode.  The software update is performed while the guest is
>> running to minimize downtime.
>>
>> window 1                                        | window 2
>>                                                 |
>> # qemu-system-x86_64 ...                        |
>> QEMU 4.2.0 monitor - type 'help' ...            |
>> (qemu) info status                              |
>> VM status: running                              |
>>                                                 | # yum update qemu
>> (qemu) cpr-save /tmp/qemu.sav restart           |
>> (qemu) cpr-exec qemu-system-x86_64 -S ...       |
>> QEMU 4.2.1 monitor - type 'help' ...            |
>> (qemu) info status                              |
>> VM status: paused (prelaunch)                   |
>> (qemu) cpr-load /tmp/qemu.sav                   |
>> (qemu) info status                              |
>> VM status: running                              |
>>
>>
>> Here is an example of updating the host kernel using reboot mode.
>>
>> window 1                                        | window 2
>>                                                 |
>> # qemu-system-x86_64 ...mem-path=/dev/dax0.0 ...|
>> QEMU 4.2.1 monitor - type 'help' ...            |
>> (qemu) info status                              |
>> VM status: running                              |
>>                                                 | # yum update kernel-uek
>> (qemu) cpr-save /tmp/qemu.sav restart           |
>> (qemu) quit                                     |
>>                                                 |
>> # systemctl kexec                               |
>> kexec_core: Starting new kernel                 |
>> ...                                             |
>>                                                 |
>> # qemu-system-x86_64 -S mem-path=/dev/dax0.0 ...|
>> QEMU 4.2.1 monitor - type 'help' ...            |
>> (qemu) info status                              |
>> VM status: paused (prelaunch)                   |
>> (qemu) cpr-load /tmp/qemu.sav                   |
>> (qemu) info status                              |
>> VM status: running                              |
>>
>> Changes from V1 to V2:
>>   - revert vmstate infrastructure changes
>>   - refactor cpr functions into new files
>>   - delete MADV_DOEXEC and use memfd + VFIO_DMA_UNMAP_FLAG_SUSPEND to
>>     preserve memory.
>>   - add framework to filter chardev's that support cpr
>>   - save and restore vfio eventfd's
>>   - modify cprinfo QMP interface
>>   - incorporate misc review feedback
>>   - remove unrelated and unneeded patches
>>   - refactor all patches into a shorter and easier to review series
>>
>> Changes from V2 to V3:
>>   - rebase to qemu 6.0.0
>>   - use final definition of vfio ioctls (VFIO_DMA_UNMAP_FLAG_VADDR etc)
>>   - change memfd-alloc to a machine option
>>   - Use qio_channel_socket_new_fd instead of adding qio_channel_socket_new_fd
>>   - close monitor socket during cpr
>>   - fix a few unreported bugs
>>   - support memory-backend-memfd
>>
>> Changes from V3 to V4:
>>   - split reboot mode into separate patches
>>   - add cprexec command
>>   - delete QEMU_START_FREEZE, argv_main, and /usr/bin/qemu-exec
>>   - add more checks for vfio and cpr compatibility, and recover after errors
>>   - save vfio pci config in vmstate
>>   - rename {setenv,getenv}_event_fd to {save,load}_event_fd
>>   - use qemu_strtol
>>   - change 6.0 references to 6.1
>>   - use strerror(), use EXIT_FAILURE, remove period from error messages
>>   - distribute MAINTAINERS additions to each patch
>>
>> Changes from V4 to V5:
>>   - rebase to master
>>
>> Changes from V5 to V6:
>>   vfio:
>>   - delete redundant bus_master_enable_region in vfio_pci_post_load
>>   - delete unmap.size warning
>>   - fix phys_config memory leak
>>   - add INTX support
>>   - add vfio_named_notifier_init() helper
>>   Other:
>>   - 6.1 -> 6.2
>>   - rename file -> filename in qapi
>>   - delete cprinfo.  qapi introspection serves the same purpose.
>>   - rename cprsave, cprexec, cprload -> cpr-save, cpr-exec, cpr-load
>>   - improve documentation in qapi/cpr.json
>>   - rename qemu_ram_volatile -> qemu_ram_check_volatile, and use
>>     qemu_ram_foreach_block
>>   - rename handle -> opaque
>>   - use ERRP_GUARD
>>   - use g_autoptr and g_autofree, and glib allocation functions
>>   - conform to error conventions for bool and int function return values
>>     and function names.
>>   - remove word "error" in error messages
>>   - rename as_flat_walk and its callback, and add comments.
>>   - rename qemu_clr_cloexec -> qemu_clear_cloexec
>>   - rename close-on-cpr -> reopen-on-cpr
>>   - add strList utility functions
>>   - factor out start on wakeup request to a separate patch
>>   - deleted unnecessary layer (cprsave etc) and squashed QMP patches
>>   - conditionally compile for CONFIG_VFIO
>>
>> Steve Sistare (24):
>>   memory: qemu_check_ram_volatile
>>   migration: fix populate_vfio_info
>>   migration: qemu file wrappers
>>   migration: simplify savevm
>>   vl: start on wakeup request
>>   cpr: reboot mode
>>   memory: flat section iterator
>>   oslib: qemu_clear_cloexec
>>   machine: memfd-alloc option
>>   qapi: list utility functions
>>   vl: helper to request re-exec
>>   cpr: preserve extra state
>>   cpr: restart mode
>>   cpr: restart HMP interfaces
>>   hostmem-memfd: cpr for memory-backend-memfd
>>   pci: export functions for cpr
>>   vfio-pci: refactor for cpr
>>   vfio-pci: cpr part 1 (fd and dma)
>>   vfio-pci: cpr part 2 (msi)
>>   vfio-pci: cpr part 3 (intx)
>>   chardev: cpr framework
>>   chardev: cpr for simple devices
>>   chardev: cpr for pty
>>   cpr: only-cpr-capable option
>>
>> Mark Kanda, Steve Sistare (3):
>>   cpr: reboot HMP interfaces
>>   vhost: reset vhost devices for cpr
>>   chardev: cpr for sockets
>>
>>  MAINTAINERS                   |  12 ++
>>  backends/hostmem-memfd.c      |  21 +--
>>  chardev/char-mux.c            |   1 +
>>  chardev/char-null.c           |   1 +
>>  chardev/char-pty.c            |  14 +-
>>  chardev/char-serial.c         |   1 +
>>  chardev/char-socket.c         |  36 +++++
>>  chardev/char-stdio.c          |   8 ++
>>  chardev/char.c                |  43 +++++-
>>  gdbstub.c                     |   1 +
>>  hmp-commands.hx               |  50 +++++++
>>  hw/core/machine.c             |  19 +++
>>  hw/pci/msix.c                 |  20 ++-
>>  hw/pci/pci.c                  |   7 +-
>>  hw/vfio/common.c              |  79 +++++++++--
>>  hw/vfio/cpr.c                 | 160 ++++++++++++++++++++++
>>  hw/vfio/meson.build           |   1 +
>>  hw/vfio/pci.c                 | 301 
>> +++++++++++++++++++++++++++++++++++++++---
>>  hw/vfio/trace-events          |   1 +
>>  hw/virtio/vhost.c             |  11 ++
>>  include/chardev/char.h        |   6 +
>>  include/exec/memory.h         |  39 ++++++
>>  include/hw/boards.h           |   1 +
>>  include/hw/pci/msix.h         |   5 +
>>  include/hw/pci/pci.h          |   2 +
>>  include/hw/vfio/vfio-common.h |   8 ++
>>  include/hw/virtio/vhost.h     |   1 +
>>  include/migration/cpr.h       |  31 +++++
>>  include/monitor/hmp.h         |   3 +
>>  include/qapi/util.h           |  28 ++++
>>  include/qemu/osdep.h          |   1 +
>>  include/sysemu/runstate.h     |   2 +
>>  include/sysemu/sysemu.h       |   1 +
>>  linux-headers/linux/vfio.h    |   6 +
>>  migration/cpr-state.c         | 215 ++++++++++++++++++++++++++++++
>>  migration/cpr.c               | 176 ++++++++++++++++++++++++
>>  migration/meson.build         |   2 +
>>  migration/migration.c         |   5 +
>>  migration/qemu-file-channel.c |  36 +++++
>>  migration/qemu-file-channel.h |   6 +
>>  migration/savevm.c            |  21 +--
>>  migration/target.c            |  24 +++-
>>  migration/trace-events        |   5 +
>>  monitor/hmp-cmds.c            |  68 ++++++----
>>  monitor/hmp.c                 |   3 +
>>  monitor/qmp.c                 |   3 +
>>  qapi/char.json                |   7 +-
>>  qapi/cpr.json                 |  76 +++++++++++
>>  qapi/meson.build              |   1 +
>>  qapi/qapi-schema.json         |   1 +
>>  qapi/qapi-util.c              |  37 ++++++
>>  qemu-options.hx               |  40 +++++-
>>  softmmu/globals.c             |   1 +
>>  softmmu/memory.c              |  46 +++++++
>>  softmmu/physmem.c             |  55 ++++++--
>>  softmmu/runstate.c            |  38 +++++-
>>  softmmu/vl.c                  |  18 ++-
>>  stubs/cpr-state.c             |  15 +++
>>  stubs/cpr.c                   |   3 +
>>  stubs/meson.build             |   2 +
>>  trace-events                  |   1 +
>>  util/oslib-posix.c            |   9 ++
>>  util/oslib-win32.c            |   4 +
>>  util/qemu-config.c            |   4 +
>>  64 files changed, 1732 insertions(+), 111 deletions(-)
>>  create mode 100644 hw/vfio/cpr.c
>>  create mode 100644 include/migration/cpr.h
>>  create mode 100644 migration/cpr-state.c
>>  create mode 100644 migration/cpr.c
>>  create mode 100644 qapi/cpr.json
>>  create mode 100644 stubs/cpr-state.c
>>  create mode 100644 stubs/cpr.c
>>
>