[PULL 11/14] arm/aspeed: Add DPS310 to Witherspoon and Rainier

[Cédric Le Goater]

From: Joel Stanley <joel@jms.id.au>

Witherspoon uses the DPS310 as a temperature sensor. Rainier uses it as
a temperature and humidity sensor.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210629142336.750058-5-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 hw/arm/aspeed.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index 97964c7e0c53..886e5992cdf3 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -602,7 +602,6 @@ static void witherspoon_bmc_i2c_init(AspeedMachineState 
*bmc)
 
     /* Bus 3: TODO bmp280@77 */
     /* Bus 3: TODO max31785@52 */
-    /* Bus 3: TODO dps310@76 */
     dev = DEVICE(i2c_slave_new(TYPE_PCA9552, 0x60));
     qdev_prop_set_string(dev, "description", "pca1");
     i2c_slave_realize_and_unref(I2C_SLAVE(dev),
@@ -617,6 +616,7 @@ static void witherspoon_bmc_i2c_init(AspeedMachineState 
*bmc)
         qdev_connect_gpio_out(dev, pca1_leds[i].gpio_id,
                               qdev_get_gpio_in(DEVICE(led), 0));
     }
+    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 3), "dps310", 0x76);
     i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "tmp423", 0x4c);
     i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), "tmp423", 0x4c);
 
@@ -725,9 +725,9 @@ static void rainier_bmc_i2c_init(AspeedMachineState *bmc)
     aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 2), 0x50, 64 * KiB);
     aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 3), 0x51, 64 * KiB);
 
-    /* Bus 7: TODO dps310@76 */
     /* Bus 7: TODO max31785@52 */
     i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x61);
+    i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "dps310", 0x76);
     /* Bus 7: TODO si7021-a20@20 */
     i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), TYPE_TMP105,
                      0x48);
-- 
2.31.1