[PATCH v4 09/11] hw/isa/piix3: QOM'ify PCI device creation and wiring

[Bernhard Beschow]

PCI interrupt wiring was performed in create() functions which are
obsolete. Move these tasks into QOM functions to modernize the code.

In order to avoid duplicate checking for xen_enabled() the realize
methods are now split.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
---
 hw/isa/piix3.c | 67 +++++++++++++++++++++++++++++++++-----------------
 1 file changed, 45 insertions(+), 22 deletions(-)

diff --git a/hw/isa/piix3.c b/hw/isa/piix3.c
index c7a9014c3f..de532cc692 100644
--- a/hw/isa/piix3.c
+++ b/hw/isa/piix3.c
@@ -24,6 +24,7 @@
 
 #include "qemu/osdep.h"
 #include "qemu/range.h"
+#include "qapi/error.h"
 #include "hw/southbridge/piix.h"
 #include "hw/irq.h"
 #include "hw/isa/isa.h"
@@ -277,7 +278,7 @@ static const MemoryRegionOps rcr_ops = {
     .endianness = DEVICE_LITTLE_ENDIAN
 };
 
-static void piix3_realize(PCIDevice *dev, Error **errp)
+static void pci_piix3_realize(PCIDevice *dev, Error **errp)
 {
     PIIX3State *d = PIIX3_PCI_DEVICE(dev);
 
@@ -302,7 +303,6 @@ static void pci_piix3_class_init(ObjectClass *klass, void 
*data)
     dc->desc        = "ISA bridge";
     dc->vmsd        = &vmstate_piix3;
     dc->hotpluggable   = false;
-    k->realize      = piix3_realize;
     k->vendor_id    = PCI_VENDOR_ID_INTEL;
     /* 82371SB PIIX3 PCI-to-ISA bridge (Step A1) */
     k->device_id    = PCI_DEVICE_ID_INTEL_82371SB_0;
@@ -326,11 +326,28 @@ static const TypeInfo piix3_pci_type_info = {
     },
 };
 
+static void piix3_realize(PCIDevice *dev, Error **errp)
+{
+    ERRP_GUARD();
+    PIIX3State *piix3 = PIIX3_PCI_DEVICE(dev);
+    PCIBus *pci_bus = pci_get_bus(dev);
+
+    pci_piix3_realize(dev, errp);
+    if (*errp) {
+        return;
+    }
+
+    pci_bus_irqs(pci_bus, piix3_set_irq, pci_slot_get_pirq,
+                 piix3, PIIX_NUM_PIRQS);
+    pci_bus_set_route_irq_fn(pci_bus, piix3_route_intx_pin_to_irq);
+};
+
 static void piix3_class_init(ObjectClass *klass, void *data)
 {
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 
     k->config_write = piix3_write_config;
+    k->realize = piix3_realize;
 }
 
 static const TypeInfo piix3_info = {
@@ -339,11 +356,33 @@ static const TypeInfo piix3_info = {
     .class_init    = piix3_class_init,
 };
 
+static void piix3_xen_realize(PCIDevice *dev, Error **errp)
+{
+    ERRP_GUARD();
+    PIIX3State *piix3 = PIIX3_PCI_DEVICE(dev);
+    PCIBus *pci_bus = pci_get_bus(dev);
+
+    pci_piix3_realize(dev, errp);
+    if (*errp) {
+        return;
+    }
+
+    /*
+     * Xen supports additional interrupt routes from the PCI devices to
+     * the IOAPIC: the four pins of each PCI device on the bus are also
+     * connected to the IOAPIC directly.
+     * These additional routes can be discovered through ACPI.
+     */
+    pci_bus_irqs(pci_bus, xen_piix3_set_irq, xen_pci_slot_get_pirq,
+                 piix3, XEN_PIIX_NUM_PIRQS);
+};
+
 static void piix3_xen_class_init(ObjectClass *klass, void *data)
 {
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 
     k->config_write = piix3_write_config_xen;
+    k->realize = piix3_xen_realize;
 };
 
 static const TypeInfo piix3_xen_info = {
@@ -365,27 +404,11 @@ PIIX3State *piix3_create(PCIBus *pci_bus, ISABus 
**isa_bus)
 {
     PIIX3State *piix3;
     PCIDevice *pci_dev;
+    const char *type = xen_enabled() ? TYPE_PIIX3_XEN_DEVICE
+                                     : TYPE_PIIX3_DEVICE;
 
-    /*
-     * Xen supports additional interrupt routes from the PCI devices to
-     * the IOAPIC: the four pins of each PCI device on the bus are also
-     * connected to the IOAPIC directly.
-     * These additional routes can be discovered through ACPI.
-     */
-    if (xen_enabled()) {
-        pci_dev = pci_create_simple_multifunction(pci_bus, -1, true,
-                                                  TYPE_PIIX3_XEN_DEVICE);
-        piix3 = PIIX3_PCI_DEVICE(pci_dev);
-        pci_bus_irqs(pci_bus, xen_piix3_set_irq, xen_pci_slot_get_pirq,
-                     piix3, XEN_PIIX_NUM_PIRQS);
-    } else {
-        pci_dev = pci_create_simple_multifunction(pci_bus, -1, true,
-                                                  TYPE_PIIX3_DEVICE);
-        piix3 = PIIX3_PCI_DEVICE(pci_dev);
-        pci_bus_irqs(pci_bus, piix3_set_irq, pci_slot_get_pirq,
-                     piix3, PIIX_NUM_PIRQS);
-        pci_bus_set_route_irq_fn(pci_bus, piix3_route_intx_pin_to_irq);
-    }
+    pci_dev = pci_create_simple_multifunction(pci_bus, -1, true, type);
+    piix3 = PIIX3_PCI_DEVICE(pci_dev);
     *isa_bus = ISA_BUS(qdev_get_child_bus(DEVICE(piix3), "isa.0"));
 
     return piix3;
-- 
2.36.1