[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH 4/8] hw/loongarch: Add LoongArch acpi support
|
From: |
Xiaojuan Yang |
|
Subject: |
[PATCH 4/8] hw/loongarch: Add LoongArch acpi support |
|
Date: |
Mon, 20 Jun 2022 16:04:47 +0800 |
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
---
hw/loongarch/Kconfig | 2 +
hw/loongarch/acpi-build.c | 620 ++++++++++++++++++++++++++++++++++++
hw/loongarch/loongson3.c | 78 ++++-
hw/loongarch/meson.build | 4 +
include/hw/loongarch/virt.h | 13 +
include/hw/pci-host/ls7a.h | 5 +
6 files changed, 719 insertions(+), 3 deletions(-)
create mode 100644 hw/loongarch/acpi-build.c
diff --git a/hw/loongarch/Kconfig b/hw/loongarch/Kconfig
index 610552e522..a99aa387c3 100644
--- a/hw/loongarch/Kconfig
+++ b/hw/loongarch/Kconfig
@@ -15,3 +15,5 @@ config LOONGARCH_VIRT
select LOONGARCH_EXTIOI
select LS7A_RTC
select SMBIOS
+ select ACPI_PCI
+ select ACPI_HW_REDUCED
diff --git a/hw/loongarch/acpi-build.c b/hw/loongarch/acpi-build.c
new file mode 100644
index 0000000000..008f661d7b
--- /dev/null
+++ b/hw/loongarch/acpi-build.c
@@ -0,0 +1,620 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Support for generating ACPI tables and passing them to Guests
+ *
+ * Copyright (C) 2021 Loongson Technology Corporation Limited
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu/bitmap.h"
+#include "hw/pci/pci.h"
+#include "hw/core/cpu.h"
+#include "target/loongarch/cpu.h"
+#include "hw/acpi/acpi-defs.h"
+#include "hw/acpi/acpi.h"
+#include "hw/nvram/fw_cfg.h"
+#include "hw/acpi/bios-linker-loader.h"
+#include "migration/vmstate.h"
+#include "hw/mem/memory-device.h"
+#include "sysemu/reset.h"
+
+/* Supported chipsets: */
+#include "hw/pci-host/ls7a.h"
+#include "hw/loongarch/virt.h"
+#include "hw/acpi/aml-build.h"
+
+#include "hw/acpi/utils.h"
+#include "hw/acpi/pci.h"
+
+#include "qom/qom-qobject.h"
+
+#include "hw/acpi/generic_event_device.h"
+
+#define ACPI_BUILD_ALIGN_SIZE 0x1000
+#define ACPI_BUILD_TABLE_SIZE 0x20000
+
+#ifdef DEBUG_ACPI_BUILD
+#define ACPI_BUILD_DPRINTF(fmt, ...) \
+ do {printf("ACPI_BUILD: " fmt, ## __VA_ARGS__); } while (0)
+#else
+#define ACPI_BUILD_DPRINTF(fmt, ...)
+#endif
+
+static void init_common_fadt_data(AcpiFadtData *data)
+{
+ AcpiFadtData fadt = {
+ /* ACPI 5.0: 4.1 Hardware-Reduced ACPI */
+ .rev = 5,
+ .flags = ((1 << ACPI_FADT_F_HW_REDUCED_ACPI) |
+ (1 << ACPI_FADT_F_RESET_REG_SUP)),
+
+ /* ACPI 5.0: 4.8.3.7 Sleep Control and Status Registers */
+ .sleep_ctl = {
+ .space_id = AML_AS_SYSTEM_MEMORY,
+ .bit_width = 8,
+ .address = GED_REG_ADDR + ACPI_GED_REG_SLEEP_CTL,
+ },
+ .sleep_sts = {
+ .space_id = AML_AS_SYSTEM_MEMORY,
+ .bit_width = 8,
+ .address = GED_REG_ADDR + ACPI_GED_REG_SLEEP_STS,
+ },
+
+ /* ACPI 5.0: 4.8.3.6 Reset Register */
+ .reset_reg = {
+ .space_id = AML_AS_SYSTEM_MEMORY,
+ .bit_width = 8,
+ .address = GED_REG_ADDR + ACPI_GED_REG_RESET,
+ },
+ .reset_val = ACPI_GED_RESET_VALUE,
+ };
+ *data = fadt;
+}
+
+static void acpi_align_size(GArray *blob, unsigned align)
+{
+ /*
+ * Align size to multiple of given size. This reduces the chance
+ * we need to change size in the future (breaking cross version migration).
+ */
+ g_array_set_size(blob, ROUND_UP(acpi_data_len(blob), align));
+}
+
+/*
+ * Loongson CPU firmware and kernel interface specification V3.1.
+ * chapter 8.7 Firmware ACPI Control Structure
+ */
+static void
+build_facs(GArray *table_data)
+{
+ const char *sig = "FACS";
+ const uint8_t reserved[40] = {};
+
+ g_array_append_vals(table_data, sig, 4); /* Signature */
+ build_append_int_noprefix(table_data, 64, 4); /* Length */
+ build_append_int_noprefix(table_data, 0, 4); /* Hardware Signature */
+ build_append_int_noprefix(table_data, 0, 4); /* Firmware Waking Vector */
+ build_append_int_noprefix(table_data, 0, 4); /* Global Lock */
+ build_append_int_noprefix(table_data, 0, 4); /* Flags */
+ g_array_append_vals(table_data, reserved, 40); /* Reserved */
+}
+
+/*
+ * Loongson CPU firmware and kernel interface specification V3.1.
+ * chapter 8.3 Multiple APIC Description Table
+ */
+static void
+build_madt(GArray *table_data, BIOSLinker *linker, LoongArchMachineState *lams)
+{
+ MachineState *ms = MACHINE(lams);
+ int i;
+ AcpiTable table = { .sig = "APIC", .rev = 1, .oem_id = lams->oem_id,
+ .oem_table_id = lams->oem_table_id };
+
+ acpi_table_begin(&table, table_data);
+
+ /* Local APIC Address */
+ build_append_int_noprefix(table_data, 0, 4);
+ build_append_int_noprefix(table_data, 1 /* PCAT_COMPAT */, 4); /* Flags */
+
+ for (i = 0; i < ms->smp.cpus; i++) {
+ /* Processor Core Interrupt Controller Structure */
+ build_append_int_noprefix(table_data, 17, 1); /* Type */
+ build_append_int_noprefix(table_data, 15, 1); /* Length */
+ build_append_int_noprefix(table_data, 1, 1); /* Version */
+ build_append_int_noprefix(table_data, i + 1, 4); /* ACPI Processor ID
*/
+ build_append_int_noprefix(table_data, i, 4); /* Core ID */
+ build_append_int_noprefix(table_data, 1, 4); /* Flags */
+ }
+
+ /* Extend I/O Interrupt Controller Structure */
+ build_append_int_noprefix(table_data, 20, 1); /* Type */
+ build_append_int_noprefix(table_data, 13, 1); /* Length */
+ build_append_int_noprefix(table_data, 1, 1); /* Version */
+ build_append_int_noprefix(table_data, 3, 1); /* Cascade */
+ build_append_int_noprefix(table_data, 0, 1); /* Node */
+ build_append_int_noprefix(table_data, 0xffff, 8); /* Node map */
+
+ /* MSI Interrupt Controller Structure */
+ build_append_int_noprefix(table_data, 21, 1); /* Type */
+ build_append_int_noprefix(table_data, 19, 1); /* Length */
+ build_append_int_noprefix(table_data, 1, 1); /* Version */
+ build_append_int_noprefix(table_data, LS7A_PCH_MSI_ADDR_LOW, 8);/* Address
*/
+ build_append_int_noprefix(table_data, 0x40, 4); /* Start */
+ build_append_int_noprefix(table_data, 0xc0, 4); /* Count */
+
+ /* Bridge I/O Interrupt Controller Structure */
+ build_append_int_noprefix(table_data, 22, 1); /* Type */
+ build_append_int_noprefix(table_data, 17, 1); /* Length */
+ build_append_int_noprefix(table_data, 1, 1); /* Version */
+ build_append_int_noprefix(table_data, LS7A_PCH_REG_BASE, 8);/* Address */
+ build_append_int_noprefix(table_data, 0x1000, 2); /* Size */
+ build_append_int_noprefix(table_data, 0, 2); /* Id */
+ build_append_int_noprefix(table_data, 0x40, 2); /* Base */
+
+ acpi_table_end(linker, &table);
+}
+
+/*
+ * Loongson CPU firmware and kernel interface specification V3.1.
+ * chapter 8.4 System Resource Affinity Table
+ */
+static void
+build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
+{
+ uint64_t i;
+ LoongArchMachineState *lams = LOONGARCH_MACHINE(machine);
+ MachineState *ms = MACHINE(lams);
+ AcpiTable table = { .sig = "SRAT", .rev = 1, .oem_id = lams->oem_id,
+ .oem_table_id = lams->oem_table_id };
+
+ acpi_table_begin(&table, table_data);
+ build_append_int_noprefix(table_data, 1, 4); /* Reserved */
+ build_append_int_noprefix(table_data, 0, 8); /* Reserved */
+
+ for (i = 0; i < ms->smp.cpus; ++i) {
+ /* Processor Local APIC/SAPIC Affinity Structure */
+ build_append_int_noprefix(table_data, 0, 1); /* Type */
+ build_append_int_noprefix(table_data, 16, 1); /* Length */
+ /* Proximity Domain [7:0] */
+ build_append_int_noprefix(table_data, 0, 1);
+ build_append_int_noprefix(table_data, i, 1); /* APIC ID */
+ /* Flags, Table 5-36 */
+ build_append_int_noprefix(table_data, 1, 4);
+ build_append_int_noprefix(table_data, 0, 1); /* Local SAPIC EID */
+ /* Proximity Domain [31:8] */
+ build_append_int_noprefix(table_data, 0, 3);
+ build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+ }
+
+ build_srat_memory(table_data, LOW_MEM_BASE, LOW_MEM_SIZE,
+ 0, MEM_AFFINITY_ENABLED);
+
+ build_srat_memory(table_data, HIGH_MEM_BASE, machine->ram_size -
LOW_MEM_SIZE,
+ 0, MEM_AFFINITY_ENABLED);
+
+ acpi_table_end(linker, &table);
+}
+
+typedef
+struct AcpiBuildState {
+ /* Copy of table in RAM (for patching). */
+ MemoryRegion *table_mr;
+ /* Is table patched? */
+ uint8_t patched;
+ void *rsdp;
+ MemoryRegion *rsdp_mr;
+ MemoryRegion *linker_mr;
+} AcpiBuildState;
+
+static void build_gpex_pci0_int(Aml *table)
+{
+ Aml *sb_scope = aml_scope("_SB");
+ Aml *pci0_scope = aml_scope("PCI0");
+ Aml *prt_pkg = aml_varpackage(128);
+ int slot, pin;
+
+ for (slot = 0; slot < PCI_SLOT_MAX; slot++) {
+ for (pin = 0; pin < PCI_NUM_PINS; pin++) {
+ Aml *pkg = aml_package(4);
+ aml_append(pkg, aml_int((slot << 16) | 0xFFFF));
+ aml_append(pkg, aml_int(pin));
+ aml_append(pkg, aml_int(0));
+ aml_append(pkg, aml_int(80 + (slot + pin) % 4));
+ aml_append(prt_pkg, pkg);
+ }
+ }
+ aml_append(pci0_scope, aml_name_decl("_PRT", prt_pkg));
+ aml_append(sb_scope, pci0_scope);
+ aml_append(table, sb_scope);
+}
+
+static void build_dbg_aml(Aml *table)
+{
+ Aml *field;
+ Aml *method;
+ Aml *while_ctx;
+ Aml *scope = aml_scope("\\");
+ Aml *buf = aml_local(0);
+ Aml *len = aml_local(1);
+ Aml *idx = aml_local(2);
+
+ aml_append(scope,
+ aml_operation_region("DBG", AML_SYSTEM_IO, aml_int(0x0402), 0x01));
+ field = aml_field("DBG", AML_BYTE_ACC, AML_NOLOCK, AML_PRESERVE);
+ aml_append(field, aml_named_field("DBGB", 8));
+ aml_append(scope, field);
+
+ method = aml_method("DBUG", 1, AML_NOTSERIALIZED);
+
+ aml_append(method, aml_to_hexstring(aml_arg(0), buf));
+ aml_append(method, aml_to_buffer(buf, buf));
+ aml_append(method, aml_subtract(aml_sizeof(buf), aml_int(1), len));
+ aml_append(method, aml_store(aml_int(0), idx));
+
+ while_ctx = aml_while(aml_lless(idx, len));
+ aml_append(while_ctx,
+ aml_store(aml_derefof(aml_index(buf, idx)), aml_name("DBGB")));
+ aml_append(while_ctx, aml_increment(idx));
+ aml_append(method, while_ctx);
+ aml_append(method, aml_store(aml_int(0x0A), aml_name("DBGB")));
+ aml_append(scope, method);
+ aml_append(table, scope);
+}
+
+static Aml *build_ls7a_osc_method(void)
+{
+ Aml *if_ctx;
+ Aml *if_ctx2;
+ Aml *else_ctx;
+ Aml *method;
+ Aml *a_cwd1 = aml_name("CDW1");
+ Aml *a_ctrl = aml_local(0);
+
+ method = aml_method("_OSC", 4, AML_NOTSERIALIZED);
+ aml_append(method, aml_create_dword_field(aml_arg(3), aml_int(0), "CDW1"));
+
+ if_ctx = aml_if(aml_equal(
+ aml_arg(0), aml_touuid("33DB4D5B-1FF7-401C-9657-7441C03DD766")));
+ aml_append(if_ctx, aml_create_dword_field(aml_arg(3), aml_int(4), "CDW2"));
+ aml_append(if_ctx, aml_create_dword_field(aml_arg(3), aml_int(8), "CDW3"));
+ aml_append(if_ctx, aml_store(aml_name("CDW3"), a_ctrl));
+
+ /*
+ * Always allow native PME, AER (no dependencies)
+ * Allow SHPC (PCI bridges can have SHPC controller)
+ */
+ aml_append(if_ctx, aml_and(a_ctrl, aml_int(0x1F), a_ctrl));
+
+ if_ctx2 = aml_if(aml_lnot(aml_equal(aml_arg(1), aml_int(1))));
+ /* Unknown revision */
+ aml_append(if_ctx2, aml_or(a_cwd1, aml_int(0x08), a_cwd1));
+ aml_append(if_ctx, if_ctx2);
+
+ if_ctx2 = aml_if(aml_lnot(aml_equal(aml_name("CDW3"), a_ctrl)));
+ /* Capabilities bits were masked */
+ aml_append(if_ctx2, aml_or(a_cwd1, aml_int(0x10), a_cwd1));
+ aml_append(if_ctx, if_ctx2);
+
+ /* Update DWORD3 in the buffer */
+ aml_append(if_ctx, aml_store(a_ctrl, aml_name("CDW3")));
+ aml_append(method, if_ctx);
+
+ else_ctx = aml_else();
+ /* Unrecognized UUID */
+ aml_append(else_ctx, aml_or(a_cwd1, aml_int(4), a_cwd1));
+ aml_append(method, else_ctx);
+
+ aml_append(method, aml_return(aml_arg(3)));
+ return method;
+}
+
+static void build_ls7a_uart_device_aml(Aml *table)
+{
+ Aml *dev;
+ Aml *crs;
+ Aml *pkg0, *pkg1, *pkg2;
+ uint32_t uart_irq = LS7A_UART_IRQ;
+
+ Aml *scope = aml_scope("_SB");
+ dev = aml_device("COMA");
+ aml_append(dev, aml_name_decl("_HID", aml_string("PNP0501")));
+ aml_append(dev, aml_name_decl("_UID", aml_int(0)));
+ aml_append(dev, aml_name_decl("_CCA", aml_int(1)));
+ crs = aml_resource_template();
+ aml_append(crs,
+ aml_qword_memory(AML_POS_DECODE, AML_MIN_FIXED, AML_MAX_FIXED,
+ AML_NON_CACHEABLE, AML_READ_WRITE,
+ 0, 0x1FE001E0, 0x1FE001E7, 0, 0x8));
+ aml_append(crs, aml_interrupt(AML_CONSUMER, AML_LEVEL, AML_ACTIVE_HIGH,
+ AML_SHARED, &uart_irq, 1));
+ aml_append(dev, aml_name_decl("_CRS", crs));
+ pkg0 = aml_package(0x2);
+ aml_append(pkg0, aml_int(0x05F5E100));
+ aml_append(pkg0, aml_string("clock-frenquency"));
+ pkg1 = aml_package(0x1);
+ aml_append(pkg1, pkg0);
+ pkg2 = aml_package(0x2);
+ aml_append(pkg2, aml_touuid("DAFFD814-6EBA-4D8C-8A91-BC9BBF4AA301"));
+ aml_append(pkg2, pkg1);
+ aml_append(dev, aml_name_decl("_DSD", pkg2));
+ aml_append(scope, dev);
+ aml_append(table, scope);
+}
+
+/*
+ * Loongson CPU firmware and kernel interface specification V3.1.
+ * chapter 8.6 Differentiated System Description Table
+ */
+static void
+build_dsdt(GArray *table_data, BIOSLinker *linker, MachineState *machine)
+{
+ Aml *dsdt, *sb_scope, *scope, *dev, *crs, *pkg;
+ int root_bus_limit = 0x7F;
+ LoongArchMachineState *lams = LOONGARCH_MACHINE(machine);
+ AcpiTable table = { .sig = "DSDT", .rev = 1, .oem_id = lams->oem_id,
+ .oem_table_id = lams->oem_table_id };
+
+ acpi_table_begin(&table, table_data);
+
+ dsdt = init_aml_allocator();
+
+ build_dbg_aml(dsdt);
+
+ sb_scope = aml_scope("_SB");
+ dev = aml_device("PCI0");
+ aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A08")));
+ aml_append(dev, aml_name_decl("_CID", aml_eisaid("PNP0A03")));
+ aml_append(dev, aml_name_decl("_ADR", aml_int(0)));
+ aml_append(dev, aml_name_decl("_BBN", aml_int(0)));
+ aml_append(dev, aml_name_decl("_UID", aml_int(1)));
+ aml_append(dev, build_ls7a_osc_method());
+ aml_append(sb_scope, dev);
+ aml_append(dsdt, sb_scope);
+
+ build_gpex_pci0_int(dsdt);
+ build_ls7a_uart_device_aml(dsdt);
+ if (lams->acpi_ged) {
+ build_ged_aml(dsdt, "\\_SB."GED_DEVICE,
+ HOTPLUG_HANDLER(lams->acpi_ged),
+ LS7A_SCI_IRQ - PCH_PIC_IRQ_OFFSET, AML_SYSTEM_MEMORY,
+ GED_EVT_ADDR);
+ }
+
+ scope = aml_scope("\\_SB.PCI0");
+ /* Build PCI0._CRS */
+ crs = aml_resource_template();
+ aml_append(crs,
+ aml_word_bus_number(AML_MIN_FIXED, AML_MAX_FIXED, AML_POS_DECODE,
+ 0x0000, 0x0, root_bus_limit,
+ 0x0000, root_bus_limit + 1));
+ aml_append(crs,
+ aml_dword_io(AML_MIN_FIXED, AML_MAX_FIXED,
+ AML_POS_DECODE, AML_ENTIRE_RANGE,
+ 0x0000, 0x0000, 0xFFFF, 0x18000000, 0x10000));
+ aml_append(crs,
+ aml_dword_memory(AML_POS_DECODE, AML_MIN_FIXED, AML_MAX_FIXED,
+ AML_CACHEABLE, AML_READ_WRITE,
+ 0, LS7A_PCI_MEM_BASE,
+ LS7A_PCI_MEM_BASE + LS7A_PCI_MEM_SIZE - 1,
+ 0, LS7A_PCI_MEM_BASE));
+ aml_append(scope, aml_name_decl("_CRS", crs));
+ aml_append(dsdt, scope);
+
+ /* System State Package */
+ scope = aml_scope("\\");
+ pkg = aml_package(4);
+ aml_append(pkg, aml_int(ACPI_GED_SLP_TYP_S5));
+ aml_append(pkg, aml_int(0)); /* ignored */
+ aml_append(pkg, aml_int(0)); /* reserved */
+ aml_append(pkg, aml_int(0)); /* reserved */
+ aml_append(scope, aml_name_decl("_S5", pkg));
+ aml_append(dsdt, scope);
+ /* Copy AML table into ACPI tables blob and patch header there */
+ g_array_append_vals(table_data, dsdt->buf->data, dsdt->buf->len);
+ acpi_table_end(linker, &table);
+ free_aml_allocator();
+}
+
+static void acpi_build(AcpiBuildTables *tables, MachineState *machine)
+{
+ LoongArchMachineState *lams = LOONGARCH_MACHINE(machine);
+ GArray *table_offsets;
+ AcpiFadtData fadt_data;
+ unsigned facs, rsdt, fadt, dsdt;
+ uint8_t *u;
+ size_t aml_len = 0;
+ GArray *tables_blob = tables->table_data;
+
+ init_common_fadt_data(&fadt_data);
+
+ table_offsets = g_array_new(false, true, sizeof(uint32_t));
+ ACPI_BUILD_DPRINTF("init ACPI tables\n");
+
+ bios_linker_loader_alloc(tables->linker,
+ ACPI_BUILD_TABLE_FILE, tables_blob,
+ 64, false);
+
+ /*
+ * FACS is pointed to by FADT.
+ * We place it first since it's the only table that has alignment
+ * requirements.
+ */
+ facs = tables_blob->len;
+ build_facs(tables_blob);
+
+ /* DSDT is pointed to by FADT */
+ dsdt = tables_blob->len;
+ build_dsdt(tables_blob, tables->linker, machine);
+
+ /*
+ * Count the size of the DSDT, we will need it for
+ * legacy sizing of ACPI tables.
+ */
+ aml_len += tables_blob->len - dsdt;
+
+ /* ACPI tables pointed to by RSDT */
+ fadt = tables_blob->len;
+ acpi_add_table(table_offsets, tables_blob);
+ fadt_data.facs_tbl_offset = &facs;
+ fadt_data.dsdt_tbl_offset = &dsdt;
+ fadt_data.xdsdt_tbl_offset = &dsdt;
+ build_fadt(tables_blob, tables->linker, &fadt_data,
+ lams->oem_id, lams->oem_table_id);
+ aml_len += tables_blob->len - fadt;
+
+ acpi_add_table(table_offsets, tables_blob);
+ build_madt(tables_blob, tables->linker, lams);
+
+ acpi_add_table(table_offsets, tables_blob);
+ build_srat(tables_blob, tables->linker, machine);
+
+ acpi_add_table(table_offsets, tables_blob);
+ {
+ AcpiMcfgInfo mcfg = {
+ .base = cpu_to_le64(LS_PCIECFG_BASE),
+ .size = cpu_to_le64(LS_PCIECFG_SIZE),
+ };
+ build_mcfg(tables_blob, tables->linker, &mcfg, lams->oem_id,
+ lams->oem_table_id);
+ }
+
+ /* Add tables supplied by user (if any) */
+ for (u = acpi_table_first(); u; u = acpi_table_next(u)) {
+ unsigned len = acpi_table_len(u);
+
+ acpi_add_table(table_offsets, tables_blob);
+ g_array_append_vals(tables_blob, u, len);
+ }
+
+ /* RSDT is pointed to by RSDP */
+ rsdt = tables_blob->len;
+ build_rsdt(tables_blob, tables->linker, table_offsets,
+ lams->oem_id, lams->oem_table_id);
+
+ /* RSDP is in FSEG memory, so allocate it separately */
+ {
+ AcpiRsdpData rsdp_data = {
+ .revision = 0,
+ .oem_id = lams->oem_id,
+ .xsdt_tbl_offset = NULL,
+ .rsdt_tbl_offset = &rsdt,
+ };
+ build_rsdp(tables->rsdp, tables->linker, &rsdp_data);
+ }
+
+ /*
+ * The align size is 128, warn if 64k is not enough therefore
+ * the align size could be resized.
+ */
+ if (tables_blob->len > ACPI_BUILD_TABLE_SIZE / 2) {
+ warn_report("ACPI table size %u exceeds %d bytes,"
+ " migration may not work",
+ tables_blob->len, ACPI_BUILD_TABLE_SIZE / 2);
+ error_printf("Try removing CPUs, NUMA nodes, memory slots"
+ " or PCI bridges.");
+ }
+
+ acpi_align_size(tables->linker->cmd_blob, ACPI_BUILD_ALIGN_SIZE);
+
+ /* Cleanup memory that's no longer used. */
+ g_array_free(table_offsets, true);
+}
+
+static void acpi_ram_update(MemoryRegion *mr, GArray *data)
+{
+ uint32_t size = acpi_data_len(data);
+
+ /*
+ * Make sure RAM size is correct - in case it got changed
+ * e.g. by migration
+ */
+ memory_region_ram_resize(mr, size, &error_abort);
+
+ memcpy(memory_region_get_ram_ptr(mr), data->data, size);
+ memory_region_set_dirty(mr, 0, size);
+}
+
+static void acpi_build_update(void *build_opaque)
+{
+ AcpiBuildState *build_state = build_opaque;
+ AcpiBuildTables tables;
+
+ /* No state to update or already patched? Nothing to do. */
+ if (!build_state || build_state->patched) {
+ return;
+ }
+ build_state->patched = 1;
+
+ acpi_build_tables_init(&tables);
+
+ acpi_build(&tables, MACHINE(qdev_get_machine()));
+
+ acpi_ram_update(build_state->table_mr, tables.table_data);
+ acpi_ram_update(build_state->rsdp_mr, tables.rsdp);
+ acpi_ram_update(build_state->linker_mr, tables.linker->cmd_blob);
+
+ acpi_build_tables_cleanup(&tables, true);
+}
+
+static void acpi_build_reset(void *build_opaque)
+{
+ AcpiBuildState *build_state = build_opaque;
+ build_state->patched = 0;
+}
+
+static const VMStateDescription vmstate_acpi_build = {
+ .name = "acpi_build",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT8(patched, AcpiBuildState),
+ VMSTATE_END_OF_LIST()
+ },
+};
+
+void loongarch_acpi_setup(LoongArchMachineState *lams)
+{
+ AcpiBuildTables tables;
+ AcpiBuildState *build_state;
+
+ if (!lams->fw_cfg) {
+ ACPI_BUILD_DPRINTF("No fw cfg. Bailing out.\n");
+ return;
+ }
+
+ if (!loongarch_is_acpi_enabled(lams)) {
+ ACPI_BUILD_DPRINTF("ACPI disabled. Bailing out.\n");
+ return;
+ }
+
+ build_state = g_malloc0(sizeof *build_state);
+
+ acpi_build_tables_init(&tables);
+ acpi_build(&tables, MACHINE(lams));
+
+ /* Now expose it all to Guest */
+ build_state->table_mr = acpi_add_rom_blob(acpi_build_update,
+ build_state, tables.table_data,
+ ACPI_BUILD_TABLE_FILE);
+ assert(build_state->table_mr != NULL);
+
+ build_state->linker_mr =
+ acpi_add_rom_blob(acpi_build_update, build_state,
+ tables.linker->cmd_blob, ACPI_BUILD_LOADER_FILE);
+
+ build_state->rsdp_mr = acpi_add_rom_blob(acpi_build_update,
+ build_state, tables.rsdp,
+ ACPI_BUILD_RSDP_FILE);
+
+ qemu_register_reset(acpi_build_reset, build_state);
+ acpi_build_reset(build_state);
+ vmstate_register(NULL, 0, &vmstate_acpi_build, build_state);
+
+ /*
+ * Cleanup tables but don't free the memory: we track it
+ * in build_state.
+ */
+ acpi_build_tables_cleanup(&tables, false);
+}
diff --git a/hw/loongarch/loongson3.c b/hw/loongarch/loongson3.c
index b638d02eb5..cc449a12ae 100644
--- a/hw/loongarch/loongson3.c
+++ b/hw/loongarch/loongson3.c
@@ -33,6 +33,10 @@
#include "hw/misc/unimp.h"
#include "hw/loongarch/fw_cfg.h"
#include "hw/firmware/smbios.h"
+#include "hw/acpi/aml-build.h"
+#include "qapi/qapi-visit-common.h"
+#include "hw/acpi/generic_event_device.h"
+#include "hw/mem/nvdimm.h"
#define PM_BASE 0x10080000
#define PM_SIZE 0x100
@@ -69,6 +73,7 @@ static void virt_machine_done(Notifier *notifier, void *data)
LoongArchMachineState *lams = container_of(notifier,
LoongArchMachineState, machine_done);
virt_build_smbios(lams);
+ loongarch_acpi_setup(lams);
}
struct la_memmap_entry {
@@ -103,7 +108,6 @@ static int la_memmap_add_entry(uint64_t address, uint64_t
length, uint32_t type)
return la_memmap_entries;
}
-
/*
* This is a placeholder for missing ACPI,
* and will eventually be replaced.
@@ -174,7 +178,32 @@ static int64_t load_kernel_info(void)
return kernel_entry;
}
-static void loongarch_devices_init(DeviceState *pch_pic)
+static DeviceState *create_acpi_ged(DeviceState *pch_pic,
LoongArchMachineState *lams)
+{
+ DeviceState *dev;
+ MachineState *ms = MACHINE(lams);
+ uint32_t event = ACPI_GED_PWR_DOWN_EVT;
+
+ if (ms->ram_slots) {
+ event |= ACPI_GED_MEM_HOTPLUG_EVT;
+ }
+ dev = qdev_new(TYPE_ACPI_GED);
+ qdev_prop_set_uint32(dev, "ged-event", event);
+
+ /* ged event */
+ sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, GED_EVT_ADDR);
+ /* memory hotplug */
+ sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, GED_MEM_ADDR);
+ /* ged regs used for reset and power down */
+ sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, GED_REG_ADDR);
+
+ sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
+ qdev_get_gpio_in(pch_pic, LS7A_SCI_IRQ -
PCH_PIC_IRQ_OFFSET));
+ sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
+ return dev;
+}
+
+static void loongarch_devices_init(DeviceState *pch_pic, LoongArchMachineState
*lams)
{
DeviceState *gpex_dev;
SysBusDevice *d;
@@ -250,6 +279,8 @@ static void loongarch_devices_init(DeviceState *pch_pic)
memory_region_init_io(pm_mem, NULL, &loongarch_virt_pm_ops,
NULL, "loongarch_virt_pm", PM_SIZE);
memory_region_add_subregion(get_system_memory(), PM_BASE, pm_mem);
+ /* acpi ged */
+ lams->acpi_ged = create_acpi_ged(pch_pic, lams);
}
static void loongarch_irq_init(LoongArchMachineState *lams)
@@ -347,7 +378,7 @@ static void loongarch_irq_init(LoongArchMachineState *lams)
qdev_get_gpio_in(extioi, i + PCH_MSI_IRQ_START));
}
- loongarch_devices_init(pch_pic);
+ loongarch_devices_init(pch_pic, lams);
}
static bool loongarch_firmware_init(LoongArchMachineState *lams)
@@ -565,6 +596,40 @@ static void loongarch_init(MachineState *machine)
qemu_add_machine_init_done_notifier(&lams->machine_done);
}
+bool loongarch_is_acpi_enabled(LoongArchMachineState *lams)
+{
+ if (lams->acpi == ON_OFF_AUTO_OFF) {
+ return false;
+ }
+ return true;
+}
+
+static void loongarch_get_acpi(Object *obj, Visitor *v, const char *name,
+ void *opaque, Error **errp)
+{
+ LoongArchMachineState *lams = LOONGARCH_MACHINE(obj);
+ OnOffAuto acpi = lams->acpi;
+
+ visit_type_OnOffAuto(v, name, &acpi, errp);
+}
+
+static void loongarch_set_acpi(Object *obj, Visitor *v, const char *name,
+ void *opaque, Error **errp)
+{
+ LoongArchMachineState *lams = LOONGARCH_MACHINE(obj);
+
+ visit_type_OnOffAuto(v, name, &lams->acpi, errp);
+}
+
+static void loongarch_machine_initfn(Object *obj)
+{
+ LoongArchMachineState *lams = LOONGARCH_MACHINE(obj);
+
+ lams->acpi = ON_OFF_AUTO_AUTO;
+ lams->oem_id = g_strndup(ACPI_BUILD_APPNAME6, 6);
+ lams->oem_table_id = g_strndup(ACPI_BUILD_APPNAME8, 8);
+}
+
static void loongarch_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
@@ -580,6 +645,12 @@ static void loongarch_class_init(ObjectClass *oc, void
*data)
mc->block_default_type = IF_VIRTIO;
mc->default_boot_order = "c";
mc->no_cdrom = 1;
+
+ object_class_property_add(oc, "acpi", "OnOffAuto",
+ loongarch_get_acpi, loongarch_set_acpi,
+ NULL, NULL);
+ object_class_property_set_description(oc, "acpi",
+ "Enable ACPI");
}
static const TypeInfo loongarch_machine_types[] = {
@@ -588,6 +659,7 @@ static const TypeInfo loongarch_machine_types[] = {
.parent = TYPE_MACHINE,
.instance_size = sizeof(LoongArchMachineState),
.class_init = loongarch_class_init,
+ .instance_init = loongarch_machine_initfn,
}
};
diff --git a/hw/loongarch/meson.build b/hw/loongarch/meson.build
index cecb1a5d65..3e7cbcfc05 100644
--- a/hw/loongarch/meson.build
+++ b/hw/loongarch/meson.build
@@ -1,4 +1,8 @@
loongarch_ss = ss.source_set()
+loongarch_ss.add(files(
+ 'fw_cfg.c',
+))
loongarch_ss.add(when: 'CONFIG_LOONGARCH_VIRT', if_true: files('loongson3.c'))
+loongarch_ss.add(when: 'CONFIG_ACPI', if_true: files('acpi-build.c'))
hw_arch += {'loongarch': loongarch_ss}
diff --git a/include/hw/loongarch/virt.h b/include/hw/loongarch/virt.h
index 55bc2fe4e9..63b6917c15 100644
--- a/include/hw/loongarch/virt.h
+++ b/include/hw/loongarch/virt.h
@@ -21,6 +21,13 @@
#define LA_BIOS_BASE 0x1c000000
#define LA_BIOS_SIZE (4 * MiB)
+#define LOW_MEM_BASE 0
+#define LOW_MEM_SIZE 0x10000000
+#define HIGH_MEM_BASE 0x90000000
+#define GED_EVT_ADDR 0x100e0000
+#define GED_MEM_ADDR (GED_EVT_ADDR + ACPI_GED_EVT_SEL_LEN)
+#define GED_REG_ADDR (GED_MEM_ADDR + MEMORY_HOTPLUG_IO_LEN)
+
struct LoongArchMachineState {
/*< private >*/
MachineState parent_obj;
@@ -34,8 +41,14 @@ struct LoongArchMachineState {
/* State for other subsystems/APIs: */
FWCfgState *fw_cfg;
Notifier machine_done;
+ OnOffAuto acpi;
+ char *oem_id;
+ char *oem_table_id;
+ DeviceState *acpi_ged;
};
#define TYPE_LOONGARCH_MACHINE MACHINE_TYPE_NAME("virt")
OBJECT_DECLARE_SIMPLE_TYPE(LoongArchMachineState, LOONGARCH_MACHINE)
+bool loongarch_is_acpi_enabled(LoongArchMachineState *lams);
+void loongarch_acpi_setup(LoongArchMachineState *lams);
#endif
diff --git a/include/hw/pci-host/ls7a.h b/include/hw/pci-host/ls7a.h
index 08c5f78be2..f93c3e3287 100644
--- a/include/hw/pci-host/ls7a.h
+++ b/include/hw/pci-host/ls7a.h
@@ -23,6 +23,9 @@
#define LS7A_PCI_IO_BASE 0x18004000UL
#define LS7A_PCI_IO_SIZE 0xC000
+#define LS7A_PCI_MEM_BASE 0x40000000UL
+#define LS7A_PCI_MEM_SIZE 0x40000000UL
+
#define LS7A_PCH_REG_BASE 0x10000000UL
#define LS7A_IOAPIC_REG_BASE (LS7A_PCH_REG_BASE)
#define LS7A_PCH_MSI_ADDR_LOW 0x2FF00000UL
@@ -41,4 +44,6 @@
#define LS7A_MISC_REG_BASE (LS7A_PCH_REG_BASE + 0x00080000)
#define LS7A_RTC_REG_BASE (LS7A_MISC_REG_BASE + 0x00050100)
#define LS7A_RTC_LEN 0x100
+#define LS7A_ACPI_REG_BASE (LS7A_MISC_REG_BASE + 0x00050000)
+#define LS7A_SCI_IRQ (PCH_PIC_IRQ_OFFSET + 4)
#endif
--
2.31.1
- [PATCH 0/8] Add some functions for LoongArch, Xiaojuan Yang, 2022/06/20
- [PATCH 8/8] target/loongarch: Fix csrwr timer clear, Xiaojuan Yang, 2022/06/20
- [PATCH 2/8] hw/loongarch: Add -kernel and -initrd options support, Xiaojuan Yang, 2022/06/20
- [PATCH 3/8] hw/loongarch: Add LoongArch smbios support, Xiaojuan Yang, 2022/06/20
- [PATCH 7/8] target/loongarch: Fix vector size of exception entry address, Xiaojuan Yang, 2022/06/20
- [PATCH 5/8] hw/loongarch: Add fdt support, Xiaojuan Yang, 2022/06/20
- [PATCH 6/8] hw/loongarch: Fix loongarch ipi device, Xiaojuan Yang, 2022/06/20
- [PATCH 4/8] hw/loongarch: Add LoongArch acpi support,
Xiaojuan Yang <=
- [PATCH 1/8] hw/loongarch: Add default bios startup support, Xiaojuan Yang, 2022/06/20
- Re: [PATCH 0/8] Add some functions for LoongArch, Richard Henderson, 2022/06/20