[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL 01/15] hw/nvme: Add support for SR-IOV
From: |
Klaus Jensen |
Subject: |
[PULL 01/15] hw/nvme: Add support for SR-IOV |
Date: |
Thu, 23 Jun 2022 23:34:28 +0200 |
From: Lukasz Maniak <lukasz.maniak@linux.intel.com>
This patch implements initial support for Single Root I/O Virtualization
on an NVMe device.
Essentially, it allows to define the maximum number of virtual functions
supported by the NVMe controller via sriov_max_vfs parameter.
Passing a non-zero value to sriov_max_vfs triggers reporting of SR-IOV
capability by a physical controller and ARI capability by both the
physical and virtual function devices.
NVMe controllers created via virtual functions mirror functionally
the physical controller, which may not entirely be the case, thus
consideration would be needed on the way to limit the capabilities of
the VF.
NVMe subsystem is required for the use of SR-IOV.
Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
---
hw/nvme/ctrl.c | 85 ++++++++++++++++++++++++++++++++++++++--
hw/nvme/nvme.h | 3 +-
include/hw/pci/pci_ids.h | 1 +
3 files changed, 85 insertions(+), 4 deletions(-)
diff --git a/hw/nvme/ctrl.c b/hw/nvme/ctrl.c
index 1e6e0fcad918..855ab55aa46b 100644
--- a/hw/nvme/ctrl.c
+++ b/hw/nvme/ctrl.c
@@ -35,6 +35,7 @@
* mdts=<N[optional]>,vsl=<N[optional]>, \
* zoned.zasl=<N[optional]>, \
* zoned.auto_transition=<on|off[optional]>, \
+ * sriov_max_vfs=<N[optional]> \
* subsys=<subsys_id>
* -device nvme-ns,drive=<drive_id>,bus=<bus_name>,nsid=<nsid>,\
* zoned=<true|false[optional]>, \
@@ -106,6 +107,12 @@
* transitioned to zone state closed for resource management purposes.
* Defaults to 'on'.
*
+ * - `sriov_max_vfs`
+ * Indicates the maximum number of PCIe virtual functions supported
+ * by the controller. The default value is 0. Specifying a non-zero value
+ * enables reporting of both SR-IOV and ARI capabilities by the NVMe device.
+ * Virtual function controllers will not report SR-IOV capability.
+ *
* nvme namespace device parameters
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* - `shared`
@@ -160,6 +167,7 @@
#include "sysemu/block-backend.h"
#include "sysemu/hostmem.h"
#include "hw/pci/msix.h"
+#include "hw/pci/pcie_sriov.h"
#include "migration/vmstate.h"
#include "nvme.h"
@@ -176,6 +184,9 @@
#define NVME_TEMPERATURE_CRITICAL 0x175
#define NVME_NUM_FW_SLOTS 1
#define NVME_DEFAULT_MAX_ZA_SIZE (128 * KiB)
+#define NVME_MAX_VFS 127
+#define NVME_VF_OFFSET 0x1
+#define NVME_VF_STRIDE 1
#define NVME_GUEST_ERR(trace, fmt, ...) \
do { \
@@ -5888,6 +5899,10 @@ static void nvme_ctrl_reset(NvmeCtrl *n)
g_free(event);
}
+ if (!pci_is_vf(&n->parent_obj) && n->params.sriov_max_vfs) {
+ pcie_sriov_pf_disable_vfs(&n->parent_obj);
+ }
+
n->aer_queued = 0;
n->outstanding_aers = 0;
n->qs_created = false;
@@ -6569,6 +6584,29 @@ static void nvme_check_constraints(NvmeCtrl *n, Error
**errp)
error_setg(errp, "vsl must be non-zero");
return;
}
+
+ if (params->sriov_max_vfs) {
+ if (!n->subsys) {
+ error_setg(errp, "subsystem is required for the use of SR-IOV");
+ return;
+ }
+
+ if (params->sriov_max_vfs > NVME_MAX_VFS) {
+ error_setg(errp, "sriov_max_vfs must be between 0 and %d",
+ NVME_MAX_VFS);
+ return;
+ }
+
+ if (params->cmb_size_mb) {
+ error_setg(errp, "CMB is not supported with SR-IOV");
+ return;
+ }
+
+ if (n->pmr.dev) {
+ error_setg(errp, "PMR is not supported with SR-IOV");
+ return;
+ }
+ }
}
static void nvme_init_state(NvmeCtrl *n)
@@ -6626,6 +6664,20 @@ static void nvme_init_pmr(NvmeCtrl *n, PCIDevice
*pci_dev)
memory_region_set_enabled(&n->pmr.dev->mr, false);
}
+static void nvme_init_sriov(NvmeCtrl *n, PCIDevice *pci_dev, uint16_t offset,
+ uint64_t bar_size)
+{
+ uint16_t vf_dev_id = n->params.use_intel_id ?
+ PCI_DEVICE_ID_INTEL_NVME : PCI_DEVICE_ID_REDHAT_NVME;
+
+ pcie_sriov_pf_init(pci_dev, offset, "nvme", vf_dev_id,
+ n->params.sriov_max_vfs, n->params.sriov_max_vfs,
+ NVME_VF_OFFSET, NVME_VF_STRIDE);
+
+ pcie_sriov_pf_init_vf_bar(pci_dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY |
+ PCI_BASE_ADDRESS_MEM_TYPE_64, bar_size);
+}
+
static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
{
uint8_t *pci_conf = pci_dev->config;
@@ -6640,7 +6692,7 @@ static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev,
Error **errp)
if (n->params.use_intel_id) {
pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_INTEL);
- pci_config_set_device_id(pci_conf, 0x5845);
+ pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_NVME);
} else {
pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_REDHAT);
pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_REDHAT_NVME);
@@ -6648,6 +6700,9 @@ static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev,
Error **errp)
pci_config_set_class(pci_conf, PCI_CLASS_STORAGE_EXPRESS);
pcie_endpoint_cap_init(pci_dev, 0x80);
+ if (n->params.sriov_max_vfs) {
+ pcie_ari_init(pci_dev, 0x100, 1);
+ }
bar_size = QEMU_ALIGN_UP(n->reg_size, 4 * KiB);
msix_table_offset = bar_size;
@@ -6666,8 +6721,12 @@ static int nvme_init_pci(NvmeCtrl *n, PCIDevice
*pci_dev, Error **errp)
n->reg_size);
memory_region_add_subregion(&n->bar0, 0, &n->iomem);
- pci_register_bar(pci_dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY |
- PCI_BASE_ADDRESS_MEM_TYPE_64, &n->bar0);
+ if (pci_is_vf(pci_dev)) {
+ pcie_sriov_vf_register_bar(pci_dev, 0, &n->bar0);
+ } else {
+ pci_register_bar(pci_dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY |
+ PCI_BASE_ADDRESS_MEM_TYPE_64, &n->bar0);
+ }
ret = msix_init(pci_dev, n->params.msix_qsize,
&n->bar0, 0, msix_table_offset,
&n->bar0, 0, msix_pba_offset, 0, &err);
@@ -6688,6 +6747,10 @@ static int nvme_init_pci(NvmeCtrl *n, PCIDevice
*pci_dev, Error **errp)
nvme_init_pmr(n, pci_dev);
}
+ if (!pci_is_vf(pci_dev) && n->params.sriov_max_vfs) {
+ nvme_init_sriov(n, pci_dev, 0x120, bar_size);
+ }
+
return 0;
}
@@ -6838,6 +6901,16 @@ static void nvme_realize(PCIDevice *pci_dev, Error
**errp)
NvmeCtrl *n = NVME(pci_dev);
NvmeNamespace *ns;
Error *local_err = NULL;
+ NvmeCtrl *pn = NVME(pcie_sriov_get_pf(pci_dev));
+
+ if (pci_is_vf(pci_dev)) {
+ /*
+ * VFs derive settings from the parent. PF's lifespan exceeds
+ * that of VF's, so it's safe to share params.serial.
+ */
+ memcpy(&n->params, &pn->params, sizeof(NvmeParams));
+ n->subsys = pn->subsys;
+ }
nvme_check_constraints(n, &local_err);
if (local_err) {
@@ -6902,6 +6975,11 @@ static void nvme_exit(PCIDevice *pci_dev)
if (n->pmr.dev) {
host_memory_backend_set_mapped(n->pmr.dev, false);
}
+
+ if (!pci_is_vf(pci_dev) && n->params.sriov_max_vfs) {
+ pcie_sriov_pf_exit(pci_dev);
+ }
+
msix_uninit(pci_dev, &n->bar0, &n->bar0);
memory_region_del_subregion(&n->bar0, &n->iomem);
}
@@ -6926,6 +7004,7 @@ static Property nvme_props[] = {
DEFINE_PROP_UINT8("zoned.zasl", NvmeCtrl, params.zasl, 0),
DEFINE_PROP_BOOL("zoned.auto_transition", NvmeCtrl,
params.auto_transition_zones, true),
+ DEFINE_PROP_UINT8("sriov_max_vfs", NvmeCtrl, params.sriov_max_vfs, 0),
DEFINE_PROP_END_OF_LIST(),
};
diff --git a/hw/nvme/nvme.h b/hw/nvme/nvme.h
index e41771604f59..7e4bbd5606a0 100644
--- a/hw/nvme/nvme.h
+++ b/hw/nvme/nvme.h
@@ -24,7 +24,7 @@
#include "block/nvme.h"
-#define NVME_MAX_CONTROLLERS 32
+#define NVME_MAX_CONTROLLERS 256
#define NVME_MAX_NAMESPACES 256
#define NVME_EUI64_DEFAULT ((uint64_t)0x5254000000000000)
@@ -406,6 +406,7 @@ typedef struct NvmeParams {
uint8_t zasl;
bool auto_transition_zones;
bool legacy_cmb;
+ uint8_t sriov_max_vfs;
} NvmeParams;
typedef struct NvmeCtrl {
diff --git a/include/hw/pci/pci_ids.h b/include/hw/pci/pci_ids.h
index 898083b86f87..d5ddea558bf6 100644
--- a/include/hw/pci/pci_ids.h
+++ b/include/hw/pci/pci_ids.h
@@ -238,6 +238,7 @@
#define PCI_DEVICE_ID_INTEL_82801BA_11 0x244e
#define PCI_DEVICE_ID_INTEL_82801D 0x24CD
#define PCI_DEVICE_ID_INTEL_ESB_9 0x25ab
+#define PCI_DEVICE_ID_INTEL_NVME 0x5845
#define PCI_DEVICE_ID_INTEL_82371SB_0 0x7000
#define PCI_DEVICE_ID_INTEL_82371SB_1 0x7010
#define PCI_DEVICE_ID_INTEL_82371SB_2 0x7020
--
2.36.1
- [PULL 00/15] hw/nvme updates, Klaus Jensen, 2022/06/23
- [PULL 01/15] hw/nvme: Add support for SR-IOV,
Klaus Jensen <=
- [PULL 02/15] hw/nvme: Add support for Primary Controller Capabilities, Klaus Jensen, 2022/06/23
- [PULL 03/15] hw/nvme: Add support for Secondary Controller List, Klaus Jensen, 2022/06/23
- [PULL 04/15] hw/nvme: Implement the Function Level Reset, Klaus Jensen, 2022/06/23
- [PULL 05/15] hw/nvme: Make max_ioqpairs and msix_qsize configurable in runtime, Klaus Jensen, 2022/06/23
- [PULL 06/15] hw/nvme: Remove reg_size variable and update BAR0 size calculation, Klaus Jensen, 2022/06/23
- [PULL 07/15] hw/nvme: Calculate BAR attributes in a function, Klaus Jensen, 2022/06/23
- [PULL 08/15] hw/nvme: Initialize capability structures for primary/secondary controllers, Klaus Jensen, 2022/06/23
- [PULL 09/15] hw/nvme: Add support for the Virtualization Management command, Klaus Jensen, 2022/06/23
- [PULL 11/15] hw/nvme: Update the initalization place for the AER queue, Klaus Jensen, 2022/06/23
- [PULL 10/15] docs: Add documentation for SR-IOV and Virtualization Enhancements, Klaus Jensen, 2022/06/23