qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v2 0/7] Add Qualcomm BMC machines


From: Titus Rwantare
Subject: Re: [PATCH v2 0/7] Add Qualcomm BMC machines
Date: Mon, 27 Jun 2022 09:50:56 -0700

You can take them through the aspeed branch.

Thanks.

-Titus

On Mon, 27 Jun 2022 at 09:33, Cédric Le Goater <clg@kaod.org> wrote:
>
> Hello Titus,
>
> On 6/27/22 17:46, Jae Hyun Yoo wrote:
> > Hello,
> >
> > I'm sending a series to add Qualcomm BMC machines that are equipped with
> > Aspeed AST2600 SoC. Also, this series adds MAX31785 fan controller device
> > emulation. Please help to review.
> >
> > Thanks,
> >
> > Jae
> >
> > Changes in v2:
> > * Fixed a typo in QCOM DC-SCM V1 HW strap value comment. (Rebecca)
> > * Removed a useless change which is reverted by the next patch. (Joel)
> > * Changed machine name to 'qcom-firework-bmc'. (Cedric)
> > * Dropped FRU eeprom initialization part. (Patrick)
> > * Fixed comment for a case of PB_ALL_PAGES. (Titus)
> > * Removed an error log printing when it handles PB_ALL_PAGES. (Jae)
> > * Fixed a typo in copyright in max31785.c. (Rebecca)
> > * Fixed indentation issues in max31785.c. (Titus)
> > * Fixed license identifier style and refined indentation of defines. (Jae)
> > * Added PMBUS and MAX31785 config selection under ASPEED_SOC. (Titus)
> > * Moved machine updating part from the previous patch. (Cedric)
> > * Refined code to avoid retouching by the next patch. (Joel)
> >
> > Graeme Gregory (1):
> >    hw/arm/aspeed: add Qualcomm Firework BMC machine
> >
> > Jae Hyun Yoo (2):
> >    hw/arm/aspeed: add support for the Qualcomm DC-SCM v1 board
> >    hw/arm/aspeed: firework: add I2C MUXes for VR channels
> >
> > Maheswara Kurapati (4):
> >    hw/i2c: pmbus: Page #255 is valid page for read requests.
> >    hw/sensor: add Maxim MAX31785 device
> >    hw/arm/aspeed: Add MAX31785 Fan controllers
> >    hw/arm/aspeed: firework: Add Thermal Diodes
> >
> >   hw/arm/Kconfig        |   2 +
> >   hw/arm/aspeed.c       |  95 ++++++-
> >   hw/i2c/pmbus_device.c |   6 +-
> >   hw/sensor/Kconfig     |   4 +
> >   hw/sensor/max31785.c  | 573 ++++++++++++++++++++++++++++++++++++++++++
> >   hw/sensor/meson.build |   1 +
> >   6 files changed, 674 insertions(+), 7 deletions(-)
> >   create mode 100644 hw/sensor/max31785.c
>
> Will you handle the pmbus/sensor patches or would you mind if I took them
> through the aspeed branch ?
>
> Thanks,
>
> C.
>
>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]