[PATCH v13 7/7] docs/s390x: document s390x cpu topology

[Pierre Morel]

Add some basic examples for the definition of cpu topology
in s390x.

Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
---
 docs/system/s390x/cpu-topology.rst | 87 ++++++++++++++++++++++++++++++
 docs/system/target-s390x.rst       |  1 +
 2 files changed, 88 insertions(+)
 create mode 100644 docs/system/s390x/cpu-topology.rst

diff --git a/docs/system/s390x/cpu-topology.rst 
b/docs/system/s390x/cpu-topology.rst
new file mode 100644
index 0000000000..12f974cc54
--- /dev/null
+++ b/docs/system/s390x/cpu-topology.rst
@@ -0,0 +1,87 @@
+CPU Topology on s390x
+=====================
+
+CPU Topology on S390x provides up to 5 levels of topology containers:
+nodes, drawers, books, sockets and CPUs.
+While the higher level containers, Containers Topology List Entries,
+(Containers TLE) define a tree hierarchy, the lowest level of topology
+definition, the CPU Topology List Entry (CPU TLE), provides the placement
+of the CPUs inside the parent container.
+
+Currently QEMU CPU topology uses a single level of container: the sockets.
+
+For backward compatibility, threads can be declared on the ``-smp`` command
+line. They will be seen as CPUs by the guest as long as multithreading
+is not really supported by QEMU for S390.
+
+Prerequisites
+-------------
+
+To use CPU Topology a Linux QEMU/KVM machine providing the CPU Topology 
facility
+(STFLE bit 11) is required.
+
+However, since this facility has been enabled by default in an early version
+of QEMU, we use a capability, ``KVM_CAP_S390_CPU_TOPOLOGY``, to notify KVM
+QEMU use of the CPU Topology.
+
+Enabling CPU topology
+---------------------
+
+Currently, CPU topology is only enabled in the host model.
+
+Enabling CPU topology in a CPU model is done by setting the CPU flag
+``ctop`` to ``on`` like in:
+
+.. code-block:: bash
+
+   -cpu gen16b,ctop=on
+
+Having the topology disabled by default allows migration between
+old and new QEMU without adding new flags.
+
+Indicating the CPU topology to the Virtual Machine
+--------------------------------------------------
+
+The CPU Topology, can be specified on the QEMU command line
+with the ``-smp`` or the ``-device`` QEMU command arguments.
+
+In the following machine we define 8 sockets with 4 cores each.
+Note that S390 QEMU machines do not implement multithreading.
+
+.. code-block:: bash
+
+  $ qemu-system-s390x -m 2G \
+    -cpu gen16b,ctop=on \
+    -smp cpus=5,sockets=8,cores=4,maxcpus=32 \
+    -device host-s390x-cpu,core-id=14 \
+
+New CPUs can be plugged using the device_add hmp command like in:
+
+.. code-block:: bash
+
+  (qemu) device_add host-s390x-cpu,core-id=9
+
+The core-id defines the placement of the core in the topology by
+starting with core 0 in socket 0 up to maxcpus.
+
+In the example above:
+
+* There are 5 CPUs provided to the guest with the ``-smp`` command line
+  They will take the core-ids 0,1,2,3,4
+  As we have 4 cores in a socket, we have 4 CPUs provided
+  to the guest in socket 0, with core-ids 0,1,2,3.
+  The last cpu, with core-id 4, will be on socket 1.
+
+* the core with ID 14 provided by the ``-device`` command line will
+  be placed in socket 3, with core-id 14
+
+* the core with ID 9 provided by the ``device_add`` qmp command will
+  be placed in socket 2, with core-id 9
+
+Note that the core ID is machine wide and the CPU TLE masks provided
+by the STSI instruction will be writen in a big endian mask:
+
+* in socket 0: 0xf0000000 (core id 0,1,2,3)
+* in socket 1: 0x08000000 (core id 4)
+* in socket 2: 0x00400000 (core id 9)
+* in socket 3: 0x00020000 (core id 14)
diff --git a/docs/system/target-s390x.rst b/docs/system/target-s390x.rst
index c636f64113..ff0ffe04f3 100644
--- a/docs/system/target-s390x.rst
+++ b/docs/system/target-s390x.rst
@@ -33,3 +33,4 @@ Architectural features
 .. toctree::
    s390x/bootdevices
    s390x/protvirt
+   s390x/cpu-topology
-- 
2.31.1