qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v2 0/7] Enable Cubieboard A10 boot SPL from SD card


From: Strahinja Jankovic
Subject: Re: [PATCH v2 0/7] Enable Cubieboard A10 boot SPL from SD card
Date: Sun, 18 Dec 2022 23:34:14 +0100

Hi,


On Sun, Dec 18, 2022 at 11:17 PM Philippe Mathieu-Daudé
<philmd@linaro.org> wrote:
>
> On 18/12/22 22:19, Strahinja Jankovic wrote:
> > This patch series adds missing Allwinner A10 modules needed for
> > successful SPL boot:
> > - Clock controller module
> > - DRAM controller
> > - I2C0 controller (added also for Allwinner H3 since it is the same)
> > - AXP-209 connected to I2C0 bus
> >
> > It also updates Allwinner A10 emulation so SPL is copied from attached
> > SD card if `-kernel` parameter is not passed when starting QEMU
> > (approach adapted from Allwinner H3 implementation).
> >
> > Boot from SD card has been tested with Cubieboard Armbian SD card image and 
> > custom
> > Yocto image built for Cubieboard.
> > Example usage for Armbian image:
> > qemu-system-arm -M cubieboard -nographic -sd 
> > ~/Armbian_22.11.0-trunk_Cubieboard_kinetic_edge_6.0.7.img
>
> As a follow-up, could you add a test similar to
> test_arm_orangepi_bionic_20_08() in tests/avocado/boot_linux_console.py?
>
> This test could be refactored as do_test_arm_allwinner_armbian(), called
> for orangepi and cubieboard with the corresponding url / hash.

I was planning to do it (I already have a patch for cubieboard), but
there is a problem with finding a stable-enough image for cubieboard
for automated testing.
Unfortunately, Cubieboard does not have supported Armbian images as
OrangePi-PC has (it only has weekly builds). From the images that can
be found on archive.armbian.com, there is only one bionic image
(21.02) and it won't boot because it hangs due to the musb issue (I
tried both with my patches and without, by extracting
kernel/dtb/initrd). Other images are focal, but for some reason, in
those images it is impossible to interrupt U-Boot (tested with 21.08),
so I could not append to bootcmd to make boot process more verbose and
easier to monitor for automated testing.

That is why, for now, I would suggest not updating the SPL/SD boot
test for Cubieboard.

Best regards,
Strahinja



reply via email to

[Prev in Thread] Current Thread [Next in Thread]