[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v3 3/3] hw/ufs: Support for UFS logical unit
|
From: |
Jeuk Kim |
|
Subject: |
[PATCH v3 3/3] hw/ufs: Support for UFS logical unit |
|
Date: |
Wed, 21 Jun 2023 17:03:32 +0900 |
This commit adds support for ufs logical unit.
The LU handles processing for the SCSI command,
unit descriptor query request.
This commit enables the UFS device to process
IO requests.
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
---
hw/ufs/lu.c | 1441 ++++++++++++++++++++++++++++++++++++++
hw/ufs/meson.build | 2 +-
hw/ufs/trace-events | 25 +
hw/ufs/ufs.c | 252 ++++++-
hw/ufs/ufs.h | 43 ++
include/scsi/constants.h | 1 +
6 files changed, 1757 insertions(+), 7 deletions(-)
create mode 100644 hw/ufs/lu.c
diff --git a/hw/ufs/lu.c b/hw/ufs/lu.c
new file mode 100644
index 0000000000..ef69de61a5
--- /dev/null
+++ b/hw/ufs/lu.c
@@ -0,0 +1,1441 @@
+/*
+ * QEMU UFS Logical Unit
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd. All rights reserved.
+ *
+ * Written by Jeuk Kim <jeuk20.kim@samsung.com>
+ *
+ * This code is licensed under the GNU GPL v2 or later.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/units.h"
+#include "qapi/error.h"
+#include "qemu/memalign.h"
+#include "hw/scsi/scsi.h"
+#include "scsi/constants.h"
+#include "sysemu/block-backend.h"
+#include "qemu/cutils.h"
+#include "trace.h"
+#include "ufs.h"
+
+/*
+ * The code below handling SCSI commands is copied from hw/scsi/scsi-disk.c,
+ * with minor adjustments to make it work for UFS.
+ */
+
+#define SCSI_DMA_BUF_SIZE (128 * KiB)
+#define SCSI_MAX_INQUIRY_LEN 256
+#define SCSI_INQUIRY_DATA_SIZE 36
+#define SCSI_MAX_MODE_LEN 256
+
+typedef struct UfsSCSIReq {
+ SCSIRequest req;
+ /* Both sector and sector_count are in terms of BDRV_SECTOR_SIZE bytes. */
+ uint64_t sector;
+ uint32_t sector_count;
+ uint32_t buflen;
+ bool started;
+ bool need_fua_emulation;
+ struct iovec iov;
+ QEMUIOVector qiov;
+ BlockAcctCookie acct;
+} UfsSCSIReq;
+
+static void ufs_scsi_free_request(SCSIRequest *req)
+{
+ UfsSCSIReq *r = DO_UPCAST(UfsSCSIReq, req, req);
+
+ qemu_vfree(r->iov.iov_base);
+}
+
+static void scsi_check_condition(UfsSCSIReq *r, SCSISense sense)
+{
+ trace_ufs_scsi_check_condition(r->req.tag, sense.key, sense.asc,
+ sense.ascq);
+ scsi_req_build_sense(&r->req, sense);
+ scsi_req_complete(&r->req, CHECK_CONDITION);
+}
+
+static int ufs_scsi_emulate_vpd_page(SCSIRequest *req, uint8_t *outbuf,
+ uint32_t outbuf_len)
+{
+ UfsHc *u = UFS(req->bus->qbus.parent);
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, req->dev);
+ uint8_t page_code = req->cmd.buf[2];
+ int start, buflen = 0;
+
+ if (outbuf_len < SCSI_INQUIRY_DATA_SIZE) {
+ return -1;
+ }
+
+ outbuf[buflen++] = lu->qdev.type & 0x1f;
+ outbuf[buflen++] = page_code;
+ outbuf[buflen++] = 0x00;
+ outbuf[buflen++] = 0x00;
+ start = buflen;
+
+ switch (page_code) {
+ case 0x00: /* Supported page codes, mandatory */
+ {
+ trace_ufs_scsi_emulate_vpd_page_00(req->cmd.xfer);
+ outbuf[buflen++] = 0x00; /* list of supported pages (this page) */
+ if (u->params.serial) {
+ outbuf[buflen++] = 0x80; /* unit serial number */
+ }
+ outbuf[buflen++] = 0x87; /* mode page policy */
+ break;
+ }
+ case 0x80: /* Device serial number, optional */
+ {
+ int l;
+
+ if (!u->params.serial) {
+ trace_ufs_scsi_emulate_vpd_page_80_not_supported();
+ return -1;
+ }
+
+ l = strlen(u->params.serial);
+ if (l > SCSI_INQUIRY_DATA_SIZE) {
+ l = SCSI_INQUIRY_DATA_SIZE;
+ }
+
+ trace_ufs_scsi_emulate_vpd_page_80(req->cmd.xfer);
+ memcpy(outbuf + buflen, u->params.serial, l);
+ buflen += l;
+ break;
+ }
+ case 0x87: /* Mode Page Policy, mandatory */
+ {
+ trace_ufs_scsi_emulate_vpd_page_87(req->cmd.xfer);
+ outbuf[buflen++] = 0x3f; /* apply to all mode pages and subpages */
+ outbuf[buflen++] = 0xff;
+ outbuf[buflen++] = 0; /* shared */
+ outbuf[buflen++] = 0;
+ break;
+ }
+ default:
+ return -1;
+ }
+ /* done with EVPD */
+ assert(buflen - start <= 255);
+ outbuf[start - 1] = buflen - start;
+ return buflen;
+}
+
+static int ufs_scsi_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf,
+ uint32_t outbuf_len)
+{
+ int buflen = 0;
+
+ if (outbuf_len < SCSI_INQUIRY_DATA_SIZE) {
+ return -1;
+ }
+
+ if (req->cmd.buf[1] & 0x1) {
+ /* Vital product data */
+ return ufs_scsi_emulate_vpd_page(req, outbuf, outbuf_len);
+ }
+
+ /* Standard INQUIRY data */
+ if (req->cmd.buf[2] != 0) {
+ return -1;
+ }
+
+ /* PAGE CODE == 0 */
+ buflen = req->cmd.xfer;
+ if (buflen > SCSI_MAX_INQUIRY_LEN) {
+ buflen = SCSI_MAX_INQUIRY_LEN;
+ }
+
+ if (is_wlun(req->lun)) {
+ outbuf[0] = TYPE_WLUN;
+ } else {
+ outbuf[0] = 0;
+ }
+ outbuf[1] = 0;
+
+ strpadcpy((char *)&outbuf[16], 16, "QEMU UFS", ' ');
+ strpadcpy((char *)&outbuf[8], 8, "QEMU", ' ');
+
+ memset(&outbuf[32], 0, 4);
+
+ outbuf[2] = 0x06; /* SPC-4 */
+ outbuf[3] = 0x2;
+
+ if (buflen > SCSI_INQUIRY_DATA_SIZE) {
+ outbuf[4] = buflen - 5; /* Additional Length = (Len - 1) - 4 */
+ } else {
+ /*
+ * If the allocation length of CDB is too small, the additional
+ * length is not adjusted
+ */
+ outbuf[4] = SCSI_INQUIRY_DATA_SIZE - 5;
+ }
+
+ /* Support TCQ. */
+ outbuf[7] = req->bus->info->tcq ? 0x02 : 0;
+ return buflen;
+}
+
+static int mode_sense_page(UfsLu *lu, int page, uint8_t **p_outbuf,
+ int page_control)
+{
+ static const int mode_sense_valid[0x3f] = {
+ [MODE_PAGE_CACHING] = 1,
+ [MODE_PAGE_R_W_ERROR] = 1,
+ [MODE_PAGE_CONTROL] = 1,
+ };
+
+ uint8_t *p = *p_outbuf + 2;
+ int length;
+
+ assert(page < ARRAY_SIZE(mode_sense_valid));
+ if ((mode_sense_valid[page]) == 0) {
+ return -1;
+ }
+
+ /*
+ * If Changeable Values are requested, a mask denoting those mode
parameters
+ * that are changeable shall be returned. As we currently don't support
+ * parameter changes via MODE_SELECT all bits are returned set to zero.
+ * The buffer was already memset to zero by the caller of this function.
+ */
+ switch (page) {
+ case MODE_PAGE_CACHING:
+ length = 0x12;
+ if (page_control == 1 || /* Changeable Values */
+ blk_enable_write_cache(lu->qdev.conf.blk)) {
+ p[0] = 4; /* WCE */
+ }
+ break;
+
+ case MODE_PAGE_R_W_ERROR:
+ length = 10;
+ if (page_control == 1) { /* Changeable Values */
+ break;
+ }
+ p[0] = 0x80; /* Automatic Write Reallocation Enabled */
+ break;
+
+ case MODE_PAGE_CONTROL:
+ length = 10;
+ if (page_control == 1) { /* Changeable Values */
+ break;
+ }
+ p[1] = 0x10; /* Queue Algorithm modifier */
+ p[8] = 0xff; /* Busy Timeout Period */
+ p[9] = 0xff;
+ break;
+
+ default:
+ return -1;
+ }
+
+ assert(length < 256);
+ (*p_outbuf)[0] = page;
+ (*p_outbuf)[1] = length;
+ *p_outbuf += length + 2;
+ return length + 2;
+}
+
+static int ufs_scsi_emulate_mode_sense(UfsSCSIReq *r, uint8_t *outbuf)
+{
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+ bool dbd;
+ int page, buflen, ret, page_control;
+ uint8_t *p;
+ uint8_t dev_specific_param = 0;
+
+ dbd = (r->req.cmd.buf[1] & 0x8) != 0;
+ if (!dbd) {
+ return -1;
+ }
+
+ page = r->req.cmd.buf[2] & 0x3f;
+ page_control = (r->req.cmd.buf[2] & 0xc0) >> 6;
+
+ trace_ufs_scsi_emulate_mode_sense((r->req.cmd.buf[0] == MODE_SENSE) ? 6 :
+ 10,
+ page, r->req.cmd.xfer, page_control);
+ memset(outbuf, 0, r->req.cmd.xfer);
+ p = outbuf;
+
+ if (!blk_is_writable(lu->qdev.conf.blk)) {
+ dev_specific_param |= 0x80; /* Readonly. */
+ }
+
+ p[2] = 0; /* Medium type. */
+ p[3] = dev_specific_param;
+ p[6] = p[7] = 0; /* Block descriptor length. */
+ p += 8;
+
+ if (page_control == 3) {
+ /* Saved Values */
+ scsi_check_condition(r, SENSE_CODE(SAVING_PARAMS_NOT_SUPPORTED));
+ return -1;
+ }
+
+ if (page == 0x3f) {
+ for (page = 0; page <= 0x3e; page++) {
+ mode_sense_page(lu, page, &p, page_control);
+ }
+ } else {
+ ret = mode_sense_page(lu, page, &p, page_control);
+ if (ret == -1) {
+ return -1;
+ }
+ }
+
+ buflen = p - outbuf;
+ /*
+ * The mode data length field specifies the length in bytes of the
+ * following data that is available to be transferred. The mode data
+ * length does not include itself.
+ */
+ outbuf[0] = ((buflen - 2) >> 8) & 0xff;
+ outbuf[1] = (buflen - 2) & 0xff;
+ return buflen;
+}
+
+/*
+ * scsi_handle_rw_error has two return values. False means that the error
+ * must be ignored, true means that the error has been processed and the
+ * caller should not do anything else for this request. Note that
+ * scsi_handle_rw_error always manages its reference counts, independent
+ * of the return value.
+ */
+static bool scsi_handle_rw_error(UfsSCSIReq *r, int ret, bool acct_failed)
+{
+ bool is_read = (r->req.cmd.mode == SCSI_XFER_FROM_DEV);
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+ SCSISense sense = SENSE_CODE(NO_SENSE);
+ int error = 0;
+ bool req_has_sense = false;
+ BlockErrorAction action;
+ int status;
+
+ if (ret < 0) {
+ status = scsi_sense_from_errno(-ret, &sense);
+ error = -ret;
+ } else {
+ /* A passthrough command has completed with nonzero status. */
+ status = ret;
+ if (status == CHECK_CONDITION) {
+ req_has_sense = true;
+ error = scsi_sense_buf_to_errno(r->req.sense,
sizeof(r->req.sense));
+ } else {
+ error = EINVAL;
+ }
+ }
+
+ /*
+ * Check whether the error has to be handled by the guest or should
+ * rather follow the rerror=/werror= settings. Guest-handled errors
+ * are usually retried immediately, so do not post them to QMP and
+ * do not account them as failed I/O.
+ */
+ if (req_has_sense && scsi_sense_buf_is_guest_recoverable(
+ r->req.sense, sizeof(r->req.sense))) {
+ action = BLOCK_ERROR_ACTION_REPORT;
+ acct_failed = false;
+ } else {
+ action = blk_get_error_action(lu->qdev.conf.blk, is_read, error);
+ blk_error_action(lu->qdev.conf.blk, action, is_read, error);
+ }
+
+ switch (action) {
+ case BLOCK_ERROR_ACTION_REPORT:
+ if (acct_failed) {
+ block_acct_failed(blk_get_stats(lu->qdev.conf.blk), &r->acct);
+ }
+ if (!req_has_sense && status == CHECK_CONDITION) {
+ scsi_req_build_sense(&r->req, sense);
+ }
+ scsi_req_complete(&r->req, status);
+ return true;
+
+ case BLOCK_ERROR_ACTION_IGNORE:
+ return false;
+
+ case BLOCK_ERROR_ACTION_STOP:
+ scsi_req_retry(&r->req);
+ return true;
+
+ default:
+ g_assert_not_reached();
+ }
+}
+
+static bool ufs_scsi_req_check_error(UfsSCSIReq *r, int ret, bool acct_failed)
+{
+ if (r->req.io_canceled) {
+ scsi_req_cancel_complete(&r->req);
+ return true;
+ }
+
+ if (ret < 0) {
+ return scsi_handle_rw_error(r, ret, acct_failed);
+ }
+
+ return false;
+}
+
+static void scsi_aio_complete(void *opaque, int ret)
+{
+ UfsSCSIReq *r = (UfsSCSIReq *)opaque;
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+
+ assert(r->req.aiocb != NULL);
+ r->req.aiocb = NULL;
+ aio_context_acquire(blk_get_aio_context(lu->qdev.conf.blk));
+ if (ufs_scsi_req_check_error(r, ret, true)) {
+ goto done;
+ }
+
+ block_acct_done(blk_get_stats(lu->qdev.conf.blk), &r->acct);
+ scsi_req_complete(&r->req, GOOD);
+
+done:
+ aio_context_release(blk_get_aio_context(lu->qdev.conf.blk));
+ scsi_req_unref(&r->req);
+}
+
+static int32_t ufs_scsi_emulate_command(SCSIRequest *req, uint8_t *buf)
+{
+ UfsSCSIReq *r = DO_UPCAST(UfsSCSIReq, req, req);
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, req->dev);
+ uint8_t *outbuf;
+ int buflen;
+
+ switch (req->cmd.buf[0]) {
+ case INQUIRY:
+ case MODE_SENSE_10:
+ case START_STOP:
+ case REQUEST_SENSE:
+ break;
+
+ default:
+ if (!blk_is_available(lu->qdev.conf.blk)) {
+ scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
+ return 0;
+ }
+ break;
+ }
+
+ /*
+ * FIXME: we shouldn't return anything bigger than 4k, but the code
+ * requires the buffer to be as big as req->cmd.xfer in several
+ * places. So, do not allow CDBs with a very large ALLOCATION
+ * LENGTH. The real fix would be to modify scsi_read_data and
+ * dma_buf_read, so that they return data beyond the buflen
+ * as all zeros.
+ */
+ if (req->cmd.xfer > 65536) {
+ goto illegal_request;
+ }
+ r->buflen = MAX(4096, req->cmd.xfer);
+
+ if (!r->iov.iov_base) {
+ r->iov.iov_base = blk_blockalign(lu->qdev.conf.blk, r->buflen);
+ }
+
+ outbuf = r->iov.iov_base;
+ memset(outbuf, 0, r->buflen);
+ switch (req->cmd.buf[0]) {
+ case TEST_UNIT_READY:
+ assert(blk_is_available(lu->qdev.conf.blk));
+ break;
+ case INQUIRY:
+ buflen = ufs_scsi_emulate_inquiry(req, outbuf, r->buflen);
+ if (buflen < 0) {
+ goto illegal_request;
+ }
+ break;
+ case MODE_SENSE_10:
+ buflen = ufs_scsi_emulate_mode_sense(r, outbuf);
+ if (buflen < 0) {
+ goto illegal_request;
+ }
+ break;
+ case READ_CAPACITY_10:
+ /* The normal LEN field for this command is zero. */
+ memset(outbuf, 0, 8);
+
+ outbuf[0] = (lu->qdev.max_lba >> 24) & 0xff;
+ outbuf[1] = (lu->qdev.max_lba >> 16) & 0xff;
+ outbuf[2] = (lu->qdev.max_lba >> 8) & 0xff;
+ outbuf[3] = lu->qdev.max_lba & 0xff;
+ outbuf[4] = (lu->qdev.blocksize >> 24) & 0xff;
+ outbuf[5] = (lu->qdev.blocksize >> 16) & 0xff;
+ outbuf[6] = (lu->qdev.blocksize >> 8) & 0xff;
+ outbuf[7] = lu->qdev.blocksize & 0xff;
+ break;
+ case REQUEST_SENSE:
+ /* Just return "NO SENSE". */
+ buflen = scsi_convert_sense(NULL, 0, outbuf, r->buflen,
+ (req->cmd.buf[1] & 1) == 0);
+ if (buflen < 0) {
+ goto illegal_request;
+ }
+ break;
+ case SYNCHRONIZE_CACHE:
+ /* The request is used as the AIO opaque value, so add a ref. */
+ scsi_req_ref(&r->req);
+ block_acct_start(blk_get_stats(lu->qdev.conf.blk), &r->acct, 0,
+ BLOCK_ACCT_FLUSH);
+ r->req.aiocb = blk_aio_flush(lu->qdev.conf.blk, scsi_aio_complete, r);
+ return 0;
+ case VERIFY_10:
+ trace_ufs_scsi_emulate_command_VERIFY((req->cmd.buf[1] >> 1) & 3);
+ if (req->cmd.buf[1] & 6) {
+ goto illegal_request;
+ }
+ break;
+ case SERVICE_ACTION_IN_16:
+ /* Service Action In subcommands. */
+ if ((req->cmd.buf[1] & 31) == SAI_READ_CAPACITY_16) {
+ trace_ufs_scsi_emulate_command_SAI_16();
+ memset(outbuf, 0, req->cmd.xfer);
+
+ outbuf[0] = (lu->qdev.max_lba >> 56) & 0xff;
+ outbuf[1] = (lu->qdev.max_lba >> 48) & 0xff;
+ outbuf[2] = (lu->qdev.max_lba >> 40) & 0xff;
+ outbuf[3] = (lu->qdev.max_lba >> 32) & 0xff;
+ outbuf[4] = (lu->qdev.max_lba >> 24) & 0xff;
+ outbuf[5] = (lu->qdev.max_lba >> 16) & 0xff;
+ outbuf[6] = (lu->qdev.max_lba >> 8) & 0xff;
+ outbuf[7] = lu->qdev.max_lba & 0xff;
+ outbuf[8] = (lu->qdev.blocksize >> 24) & 0xff;
+ outbuf[9] = (lu->qdev.blocksize >> 16) & 0xff;
+ outbuf[10] = (lu->qdev.blocksize >> 8) & 0xff;
+ outbuf[11] = lu->qdev.blocksize & 0xff;
+ outbuf[12] = 0;
+ outbuf[13] = get_physical_block_exp(&lu->qdev.conf);
+
+ if (lu->unit_desc.provisioning_type == 2 ||
+ lu->unit_desc.provisioning_type == 3) {
+ outbuf[14] = 0x80;
+ }
+ /* Protection, exponent and lowest lba field left blank. */
+ break;
+ }
+ trace_ufs_scsi_emulate_command_SAI_unsupported();
+ goto illegal_request;
+ case MODE_SELECT_10:
+ trace_ufs_scsi_emulate_command_MODE_SELECT_10(r->req.cmd.xfer);
+ break;
+ case START_STOP:
+ /*
+ * TODO: START_STOP is not yet implemented. It always returns success.
+ * Revisit it when ufs power management is implemented.
+ */
+ trace_ufs_scsi_emulate_command_START_STOP();
+ break;
+ case FORMAT_UNIT:
+ trace_ufs_scsi_emulate_command_FORMAT_UNIT();
+ break;
+ case SEND_DIAGNOSTIC:
+ trace_ufs_scsi_emulate_command_SEND_DIAGNOSTIC();
+ break;
+ default:
+ trace_ufs_scsi_emulate_command_UNKNOWN(buf[0],
+ scsi_command_name(buf[0]));
+ scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
+ return 0;
+ }
+ assert(!r->req.aiocb);
+ r->iov.iov_len = MIN(r->buflen, req->cmd.xfer);
+ if (r->iov.iov_len == 0) {
+ scsi_req_complete(&r->req, GOOD);
+ }
+ if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
+ assert(r->iov.iov_len == req->cmd.xfer);
+ return -r->iov.iov_len;
+ } else {
+ return r->iov.iov_len;
+ }
+
+illegal_request:
+ if (r->req.status == -1) {
+ scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
+ }
+ return 0;
+}
+
+static void ufs_scsi_emulate_read_data(SCSIRequest *req)
+{
+ UfsSCSIReq *r = DO_UPCAST(UfsSCSIReq, req, req);
+ int buflen = r->iov.iov_len;
+
+ if (buflen) {
+ trace_ufs_scsi_emulate_read_data(buflen);
+ r->iov.iov_len = 0;
+ r->started = true;
+ scsi_req_data(&r->req, buflen);
+ return;
+ }
+
+ /* This also clears the sense buffer for REQUEST SENSE. */
+ scsi_req_complete(&r->req, GOOD);
+}
+
+static int ufs_scsi_check_mode_select(UfsLu *lu, int page, uint8_t *inbuf,
+ int inlen)
+{
+ uint8_t mode_current[SCSI_MAX_MODE_LEN];
+ uint8_t mode_changeable[SCSI_MAX_MODE_LEN];
+ uint8_t *p;
+ int len, expected_len, changeable_len, i;
+
+ /*
+ * The input buffer does not include the page header, so it is
+ * off by 2 bytes.
+ */
+ expected_len = inlen + 2;
+ if (expected_len > SCSI_MAX_MODE_LEN) {
+ return -1;
+ }
+
+ /* MODE_PAGE_ALLS is only valid for MODE SENSE commands */
+ if (page == MODE_PAGE_ALLS) {
+ return -1;
+ }
+
+ p = mode_current;
+ memset(mode_current, 0, inlen + 2);
+ len = mode_sense_page(lu, page, &p, 0);
+ if (len < 0 || len != expected_len) {
+ return -1;
+ }
+
+ p = mode_changeable;
+ memset(mode_changeable, 0, inlen + 2);
+ changeable_len = mode_sense_page(lu, page, &p, 1);
+ assert(changeable_len == len);
+
+ /*
+ * Check that unchangeable bits are the same as what MODE SENSE
+ * would return.
+ */
+ for (i = 2; i < len; i++) {
+ if (((mode_current[i] ^ inbuf[i - 2]) & ~mode_changeable[i]) != 0) {
+ return -1;
+ }
+ }
+ return 0;
+}
+
+static void ufs_scsi_apply_mode_select(UfsLu *lu, int page, uint8_t *p)
+{
+ switch (page) {
+ case MODE_PAGE_CACHING:
+ blk_set_enable_write_cache(lu->qdev.conf.blk, (p[0] & 4) != 0);
+ break;
+
+ default:
+ break;
+ }
+}
+
+static int mode_select_pages(UfsSCSIReq *r, uint8_t *p, int len, bool change)
+{
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+
+ while (len > 0) {
+ int page, page_len;
+
+ page = p[0] & 0x3f;
+ if (p[0] & 0x40) {
+ goto invalid_param;
+ } else {
+ if (len < 2) {
+ goto invalid_param_len;
+ }
+ page_len = p[1];
+ p += 2;
+ len -= 2;
+ }
+
+ if (page_len > len) {
+ goto invalid_param_len;
+ }
+
+ if (!change) {
+ if (ufs_scsi_check_mode_select(lu, page, p, page_len) < 0) {
+ goto invalid_param;
+ }
+ } else {
+ ufs_scsi_apply_mode_select(lu, page, p);
+ }
+
+ p += page_len;
+ len -= page_len;
+ }
+ return 0;
+
+invalid_param:
+ scsi_check_condition(r, SENSE_CODE(INVALID_PARAM));
+ return -1;
+
+invalid_param_len:
+ scsi_check_condition(r, SENSE_CODE(INVALID_PARAM_LEN));
+ return -1;
+}
+
+static void ufs_scsi_emulate_mode_select(UfsSCSIReq *r, uint8_t *inbuf)
+{
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+ uint8_t *p = inbuf;
+ int len = r->req.cmd.xfer;
+ int hdr_len = 8;
+ int bd_len;
+ int pass;
+
+ /* We only support PF=1, SP=0. */
+ if ((r->req.cmd.buf[1] & 0x11) != 0x10) {
+ goto invalid_field;
+ }
+
+ if (len < hdr_len) {
+ goto invalid_param_len;
+ }
+
+ bd_len = lduw_be_p(&p[6]);
+ if (bd_len != 0) {
+ goto invalid_param;
+ }
+
+ len -= hdr_len;
+ p += hdr_len;
+
+ /* Ensure no change is made if there is an error! */
+ for (pass = 0; pass < 2; pass++) {
+ if (mode_select_pages(r, p, len, pass == 1) < 0) {
+ assert(pass == 0);
+ return;
+ }
+ }
+
+ if (!blk_enable_write_cache(lu->qdev.conf.blk)) {
+ /* The request is used as the AIO opaque value, so add a ref. */
+ scsi_req_ref(&r->req);
+ block_acct_start(blk_get_stats(lu->qdev.conf.blk), &r->acct, 0,
+ BLOCK_ACCT_FLUSH);
+ r->req.aiocb = blk_aio_flush(lu->qdev.conf.blk, scsi_aio_complete, r);
+ return;
+ }
+
+ scsi_req_complete(&r->req, GOOD);
+ return;
+
+invalid_param:
+ scsi_check_condition(r, SENSE_CODE(INVALID_PARAM));
+ return;
+
+invalid_param_len:
+ scsi_check_condition(r, SENSE_CODE(INVALID_PARAM_LEN));
+ return;
+
+invalid_field:
+ scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
+}
+
+/* sector_num and nb_sectors expected to be in qdev blocksize */
+static inline bool check_lba_range(UfsLu *lu, uint64_t sector_num,
+ uint32_t nb_sectors)
+{
+ /*
+ * The first line tests that no overflow happens when computing the last
+ * sector. The second line tests that the last accessed sector is in
+ * range.
+ *
+ * Careful, the computations should not underflow for nb_sectors == 0,
+ * and a 0-block read to the first LBA beyond the end of device is
+ * valid.
+ */
+ return (sector_num <= sector_num + nb_sectors &&
+ sector_num + nb_sectors <= lu->qdev.max_lba + 1);
+}
+
+static void ufs_scsi_emulate_write_data(SCSIRequest *req)
+{
+ UfsSCSIReq *r = DO_UPCAST(UfsSCSIReq, req, req);
+
+ if (r->iov.iov_len) {
+ int buflen = r->iov.iov_len;
+ trace_ufs_scsi_emulate_write_data(buflen);
+ r->iov.iov_len = 0;
+ scsi_req_data(&r->req, buflen);
+ return;
+ }
+
+ switch (req->cmd.buf[0]) {
+ case MODE_SELECT_10:
+ /* This also clears the sense buffer for REQUEST SENSE. */
+ ufs_scsi_emulate_mode_select(r, r->iov.iov_base);
+ break;
+ default:
+ abort();
+ }
+}
+
+/* Return a pointer to the data buffer. */
+static uint8_t *ufs_scsi_get_buf(SCSIRequest *req)
+{
+ UfsSCSIReq *r = DO_UPCAST(UfsSCSIReq, req, req);
+
+ return (uint8_t *)r->iov.iov_base;
+}
+
+static int32_t ufs_scsi_dma_command(SCSIRequest *req, uint8_t *buf)
+{
+ UfsSCSIReq *r = DO_UPCAST(UfsSCSIReq, req, req);
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, req->dev);
+ uint32_t len;
+ uint8_t command;
+
+ command = buf[0];
+
+ if (!blk_is_available(lu->qdev.conf.blk)) {
+ scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
+ return 0;
+ }
+
+ len = scsi_data_cdb_xfer(r->req.cmd.buf);
+ switch (command) {
+ case READ_6:
+ case READ_10:
+ trace_ufs_scsi_dma_command_READ(r->req.cmd.lba, len);
+ if (r->req.cmd.buf[1] & 0xe0) {
+ goto illegal_request;
+ }
+ if (!check_lba_range(lu, r->req.cmd.lba, len)) {
+ goto illegal_lba;
+ }
+ r->sector = r->req.cmd.lba * (lu->qdev.blocksize / BDRV_SECTOR_SIZE);
+ r->sector_count = len * (lu->qdev.blocksize / BDRV_SECTOR_SIZE);
+ break;
+ case WRITE_6:
+ case WRITE_10:
+ trace_ufs_scsi_dma_command_WRITE(r->req.cmd.lba, len);
+ if (!blk_is_writable(lu->qdev.conf.blk)) {
+ scsi_check_condition(r, SENSE_CODE(WRITE_PROTECTED));
+ return 0;
+ }
+ if (r->req.cmd.buf[1] & 0xe0) {
+ goto illegal_request;
+ }
+ if (!check_lba_range(lu, r->req.cmd.lba, len)) {
+ goto illegal_lba;
+ }
+ r->sector = r->req.cmd.lba * (lu->qdev.blocksize / BDRV_SECTOR_SIZE);
+ r->sector_count = len * (lu->qdev.blocksize / BDRV_SECTOR_SIZE);
+ break;
+ default:
+ abort();
+ illegal_request:
+ scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
+ return 0;
+ illegal_lba:
+ scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE));
+ return 0;
+ }
+ r->need_fua_emulation = ((r->req.cmd.buf[1] & 8) != 0);
+ if (r->sector_count == 0) {
+ scsi_req_complete(&r->req, GOOD);
+ }
+ assert(r->iov.iov_len == 0);
+ if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
+ return -r->sector_count * BDRV_SECTOR_SIZE;
+ } else {
+ return r->sector_count * BDRV_SECTOR_SIZE;
+ }
+}
+
+static void scsi_write_do_fua(UfsSCSIReq *r)
+{
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+
+ assert(r->req.aiocb == NULL);
+ assert(!r->req.io_canceled);
+
+ if (r->need_fua_emulation) {
+ block_acct_start(blk_get_stats(lu->qdev.conf.blk), &r->acct, 0,
+ BLOCK_ACCT_FLUSH);
+ r->req.aiocb = blk_aio_flush(lu->qdev.conf.blk, scsi_aio_complete, r);
+ return;
+ }
+
+ scsi_req_complete(&r->req, GOOD);
+ scsi_req_unref(&r->req);
+}
+
+static void scsi_dma_complete_noio(UfsSCSIReq *r, int ret)
+{
+ assert(r->req.aiocb == NULL);
+ if (ufs_scsi_req_check_error(r, ret, false)) {
+ goto done;
+ }
+
+ r->sector += r->sector_count;
+ r->sector_count = 0;
+ if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
+ scsi_write_do_fua(r);
+ return;
+ } else {
+ scsi_req_complete(&r->req, GOOD);
+ }
+
+done:
+ scsi_req_unref(&r->req);
+}
+
+static void scsi_dma_complete(void *opaque, int ret)
+{
+ UfsSCSIReq *r = (UfsSCSIReq *)opaque;
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+
+ assert(r->req.aiocb != NULL);
+ r->req.aiocb = NULL;
+
+ aio_context_acquire(blk_get_aio_context(lu->qdev.conf.blk));
+ if (ret < 0) {
+ block_acct_failed(blk_get_stats(lu->qdev.conf.blk), &r->acct);
+ } else {
+ block_acct_done(blk_get_stats(lu->qdev.conf.blk), &r->acct);
+ }
+ scsi_dma_complete_noio(r, ret);
+ aio_context_release(blk_get_aio_context(lu->qdev.conf.blk));
+}
+
+static BlockAIOCB *scsi_dma_readv(int64_t offset, QEMUIOVector *iov,
+ BlockCompletionFunc *cb, void *cb_opaque,
+ void *opaque)
+{
+ UfsSCSIReq *r = opaque;
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+ return blk_aio_preadv(lu->qdev.conf.blk, offset, iov, 0, cb, cb_opaque);
+}
+
+static void scsi_init_iovec(UfsSCSIReq *r, size_t size)
+{
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+
+ if (!r->iov.iov_base) {
+ r->buflen = size;
+ r->iov.iov_base = blk_blockalign(lu->qdev.conf.blk, r->buflen);
+ }
+ r->iov.iov_len = MIN(r->sector_count * BDRV_SECTOR_SIZE, r->buflen);
+ qemu_iovec_init_external(&r->qiov, &r->iov, 1);
+}
+
+static void scsi_read_complete_noio(UfsSCSIReq *r, int ret)
+{
+ uint32_t n;
+
+ assert(r->req.aiocb == NULL);
+ if (ufs_scsi_req_check_error(r, ret, false)) {
+ goto done;
+ }
+
+ n = r->qiov.size / BDRV_SECTOR_SIZE;
+ r->sector += n;
+ r->sector_count -= n;
+ scsi_req_data(&r->req, r->qiov.size);
+
+done:
+ scsi_req_unref(&r->req);
+}
+
+static void scsi_read_complete(void *opaque, int ret)
+{
+ UfsSCSIReq *r = (UfsSCSIReq *)opaque;
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+
+ assert(r->req.aiocb != NULL);
+ r->req.aiocb = NULL;
+ trace_ufs_scsi_read_data_count(r->sector_count);
+ aio_context_acquire(blk_get_aio_context(lu->qdev.conf.blk));
+ if (ret < 0) {
+ block_acct_failed(blk_get_stats(lu->qdev.conf.blk), &r->acct);
+ } else {
+ block_acct_done(blk_get_stats(lu->qdev.conf.blk), &r->acct);
+ trace_ufs_scsi_read_complete(r->req.tag, r->qiov.size);
+ }
+ scsi_read_complete_noio(r, ret);
+ aio_context_release(blk_get_aio_context(lu->qdev.conf.blk));
+}
+
+/* Actually issue a read to the block device. */
+static void scsi_do_read(UfsSCSIReq *r, int ret)
+{
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+
+ assert(r->req.aiocb == NULL);
+ if (ufs_scsi_req_check_error(r, ret, false)) {
+ goto done;
+ }
+
+ /* The request is used as the AIO opaque value, so add a ref. */
+ scsi_req_ref(&r->req);
+
+ if (r->req.sg) {
+ dma_acct_start(lu->qdev.conf.blk, &r->acct, r->req.sg,
BLOCK_ACCT_READ);
+ r->req.residual -= r->req.sg->size;
+ r->req.aiocb = dma_blk_io(
+ blk_get_aio_context(lu->qdev.conf.blk), r->req.sg,
+ r->sector << BDRV_SECTOR_BITS, BDRV_SECTOR_SIZE, scsi_dma_readv, r,
+ scsi_dma_complete, r, DMA_DIRECTION_FROM_DEVICE);
+ } else {
+ scsi_init_iovec(r, SCSI_DMA_BUF_SIZE);
+ block_acct_start(blk_get_stats(lu->qdev.conf.blk), &r->acct,
+ r->qiov.size, BLOCK_ACCT_READ);
+ r->req.aiocb = scsi_dma_readv(r->sector << BDRV_SECTOR_BITS, &r->qiov,
+ scsi_read_complete, r, r);
+ }
+
+done:
+ scsi_req_unref(&r->req);
+}
+
+static void scsi_do_read_cb(void *opaque, int ret)
+{
+ UfsSCSIReq *r = (UfsSCSIReq *)opaque;
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+
+ assert(r->req.aiocb != NULL);
+ r->req.aiocb = NULL;
+
+ aio_context_acquire(blk_get_aio_context(lu->qdev.conf.blk));
+ if (ret < 0) {
+ block_acct_failed(blk_get_stats(lu->qdev.conf.blk), &r->acct);
+ } else {
+ block_acct_done(blk_get_stats(lu->qdev.conf.blk), &r->acct);
+ }
+ scsi_do_read(opaque, ret);
+ aio_context_release(blk_get_aio_context(lu->qdev.conf.blk));
+}
+
+/* Read more data from scsi device into buffer. */
+static void scsi_read_data(SCSIRequest *req)
+{
+ UfsSCSIReq *r = DO_UPCAST(UfsSCSIReq, req, req);
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+ bool first;
+
+ trace_ufs_scsi_read_data_count(r->sector_count);
+ if (r->sector_count == 0) {
+ /* This also clears the sense buffer for REQUEST SENSE. */
+ scsi_req_complete(&r->req, GOOD);
+ return;
+ }
+
+ /* No data transfer may already be in progress */
+ assert(r->req.aiocb == NULL);
+
+ /* The request is used as the AIO opaque value, so add a ref. */
+ scsi_req_ref(&r->req);
+ if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
+ trace_ufs_scsi_read_data_invalid();
+ scsi_read_complete_noio(r, -EINVAL);
+ return;
+ }
+
+ if (!blk_is_available(req->dev->conf.blk)) {
+ scsi_read_complete_noio(r, -ENOMEDIUM);
+ return;
+ }
+
+ first = !r->started;
+ r->started = true;
+ if (first && r->need_fua_emulation) {
+ block_acct_start(blk_get_stats(lu->qdev.conf.blk), &r->acct, 0,
+ BLOCK_ACCT_FLUSH);
+ r->req.aiocb = blk_aio_flush(lu->qdev.conf.blk, scsi_do_read_cb, r);
+ } else {
+ scsi_do_read(r, 0);
+ }
+}
+
+static void scsi_write_complete_noio(UfsSCSIReq *r, int ret)
+{
+ uint32_t n;
+
+ assert(r->req.aiocb == NULL);
+ if (ufs_scsi_req_check_error(r, ret, false)) {
+ goto done;
+ }
+
+ n = r->qiov.size / BDRV_SECTOR_SIZE;
+ r->sector += n;
+ r->sector_count -= n;
+ if (r->sector_count == 0) {
+ scsi_write_do_fua(r);
+ return;
+ } else {
+ scsi_init_iovec(r, SCSI_DMA_BUF_SIZE);
+ trace_ufs_scsi_write_complete_noio(r->req.tag, r->qiov.size);
+ scsi_req_data(&r->req, r->qiov.size);
+ }
+
+done:
+ scsi_req_unref(&r->req);
+}
+
+static void scsi_write_complete(void *opaque, int ret)
+{
+ UfsSCSIReq *r = (UfsSCSIReq *)opaque;
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+
+ assert(r->req.aiocb != NULL);
+ r->req.aiocb = NULL;
+
+ aio_context_acquire(blk_get_aio_context(lu->qdev.conf.blk));
+ if (ret < 0) {
+ block_acct_failed(blk_get_stats(lu->qdev.conf.blk), &r->acct);
+ } else {
+ block_acct_done(blk_get_stats(lu->qdev.conf.blk), &r->acct);
+ }
+ scsi_write_complete_noio(r, ret);
+ aio_context_release(blk_get_aio_context(lu->qdev.conf.blk));
+}
+
+static BlockAIOCB *scsi_dma_writev(int64_t offset, QEMUIOVector *iov,
+ BlockCompletionFunc *cb, void *cb_opaque,
+ void *opaque)
+{
+ UfsSCSIReq *r = opaque;
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+ return blk_aio_pwritev(lu->qdev.conf.blk, offset, iov, 0, cb, cb_opaque);
+}
+
+static void scsi_write_data(SCSIRequest *req)
+{
+ UfsSCSIReq *r = DO_UPCAST(UfsSCSIReq, req, req);
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+
+ /* No data transfer may already be in progress */
+ assert(r->req.aiocb == NULL);
+
+ /* The request is used as the AIO opaque value, so add a ref. */
+ scsi_req_ref(&r->req);
+ if (r->req.cmd.mode != SCSI_XFER_TO_DEV) {
+ trace_ufs_scsi_write_data_invalid();
+ scsi_write_complete_noio(r, -EINVAL);
+ return;
+ }
+
+ if (!r->req.sg && !r->qiov.size) {
+ /* Called for the first time. Ask the driver to send us more data. */
+ r->started = true;
+ scsi_write_complete_noio(r, 0);
+ return;
+ }
+ if (!blk_is_available(req->dev->conf.blk)) {
+ scsi_write_complete_noio(r, -ENOMEDIUM);
+ return;
+ }
+
+ if (r->req.sg) {
+ dma_acct_start(lu->qdev.conf.blk, &r->acct, r->req.sg,
+ BLOCK_ACCT_WRITE);
+ r->req.residual -= r->req.sg->size;
+ r->req.aiocb = dma_blk_io(
+ blk_get_aio_context(lu->qdev.conf.blk), r->req.sg,
+ r->sector << BDRV_SECTOR_BITS, BDRV_SECTOR_SIZE, scsi_dma_writev,
r,
+ scsi_dma_complete, r, DMA_DIRECTION_TO_DEVICE);
+ } else {
+ block_acct_start(blk_get_stats(lu->qdev.conf.blk), &r->acct,
+ r->qiov.size, BLOCK_ACCT_WRITE);
+ r->req.aiocb = scsi_dma_writev(r->sector << BDRV_SECTOR_BITS, &r->qiov,
+ scsi_write_complete, r, r);
+ }
+}
+
+static const SCSIReqOps ufs_scsi_emulate_reqops = {
+ .size = sizeof(UfsSCSIReq),
+ .free_req = ufs_scsi_free_request,
+ .send_command = ufs_scsi_emulate_command,
+ .read_data = ufs_scsi_emulate_read_data,
+ .write_data = ufs_scsi_emulate_write_data,
+ .get_buf = ufs_scsi_get_buf,
+};
+
+static const SCSIReqOps ufs_scsi_dma_reqops = {
+ .size = sizeof(UfsSCSIReq),
+ .free_req = ufs_scsi_free_request,
+ .send_command = ufs_scsi_dma_command,
+ .read_data = scsi_read_data,
+ .write_data = scsi_write_data,
+ .get_buf = ufs_scsi_get_buf,
+};
+
+/*
+ * Following commands are not yet supported
+ * PRE_FETCH(10),
+ * UNMAP,
+ * WRITE_BUFFER, READ_BUFFER,
+ * SECURITY_PROTOCOL_IN, SECURITY_PROTOCOL_OUT
+ */
+static const SCSIReqOps *const ufs_scsi_reqops_dispatch[256] = {
+ [TEST_UNIT_READY] = &ufs_scsi_emulate_reqops,
+ [INQUIRY] = &ufs_scsi_emulate_reqops,
+ [MODE_SENSE_10] = &ufs_scsi_emulate_reqops,
+ [START_STOP] = &ufs_scsi_emulate_reqops,
+ [READ_CAPACITY_10] = &ufs_scsi_emulate_reqops,
+ [REQUEST_SENSE] = &ufs_scsi_emulate_reqops,
+ [SYNCHRONIZE_CACHE] = &ufs_scsi_emulate_reqops,
+ [MODE_SELECT_10] = &ufs_scsi_emulate_reqops,
+ [VERIFY_10] = &ufs_scsi_emulate_reqops,
+ [FORMAT_UNIT] = &ufs_scsi_emulate_reqops,
+ [SERVICE_ACTION_IN_16] = &ufs_scsi_emulate_reqops,
+ [SEND_DIAGNOSTIC] = &ufs_scsi_emulate_reqops,
+
+ [READ_6] = &ufs_scsi_dma_reqops,
+ [READ_10] = &ufs_scsi_dma_reqops,
+ [WRITE_6] = &ufs_scsi_dma_reqops,
+ [WRITE_10] = &ufs_scsi_dma_reqops,
+};
+
+static SCSIRequest *scsi_new_request(SCSIDevice *dev, uint32_t tag,
+ uint32_t lun, uint8_t *buf,
+ void *hba_private)
+{
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, dev);
+ SCSIRequest *req;
+ const SCSIReqOps *ops;
+ uint8_t command;
+
+ command = buf[0];
+ ops = ufs_scsi_reqops_dispatch[command];
+ if (!ops) {
+ ops = &ufs_scsi_emulate_reqops;
+ }
+ req = scsi_req_alloc(ops, &lu->qdev, tag, lun, hba_private);
+
+ return req;
+}
+
+static Property ufs_lu_props[] = {
+ DEFINE_PROP_DRIVE_IOTHREAD("drive", UfsLu, qdev.conf.blk),
+ DEFINE_BLOCK_PROPERTIES_BASE(UfsLu, qdev.conf),
+ DEFINE_BLOCK_ERROR_PROPERTIES(UfsLu, qdev.conf),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static bool ufs_lu_brdv_init(UfsLu *lu, Error **errp)
+{
+ SCSIDevice *dev = &lu->qdev;
+ bool read_only;
+
+ if (!lu->qdev.conf.blk) {
+ error_setg(errp, "drive property not set");
+ return false;
+ }
+
+ if (!blkconf_blocksizes(&lu->qdev.conf, errp)) {
+ return false;
+ }
+
+ if (blk_get_aio_context(lu->qdev.conf.blk) != qemu_get_aio_context() &&
+ !lu->qdev.hba_supports_iothread) {
+ error_setg(errp, "HBA does not support iothreads");
+ return false;
+ }
+
+ read_only = !blk_supports_write_perm(lu->qdev.conf.blk);
+
+ if (!blkconf_apply_backend_options(&dev->conf, read_only,
+ dev->type == TYPE_DISK, errp)) {
+ return false;
+ }
+
+ if (blk_is_sg(lu->qdev.conf.blk)) {
+ error_setg(errp, "unwanted /dev/sg*");
+ return false;
+ }
+
+ blk_iostatus_enable(lu->qdev.conf.blk);
+ return true;
+}
+
+static bool ufs_add_lu(UfsHc *u, UfsLu *lu, Error **errp)
+{
+ BlockBackend *blk = lu->qdev.conf.blk;
+ int64_t brdv_len = blk_getlength(blk);
+ uint64_t raw_dev_cap =
+ be64_to_cpu(u->geometry_desc.total_raw_device_capacity);
+
+ if (u->device_desc.number_lu >= UFS_MAX_LUS) {
+ error_setg(errp, "ufs host controller has too many logical units.");
+ return false;
+ }
+
+ if (u->lus[lu->lun] != NULL) {
+ error_setg(errp, "ufs logical unit %d already exists.", lu->lun);
+ return false;
+ }
+
+ u->lus[lu->lun] = lu;
+ u->device_desc.number_lu++;
+ raw_dev_cap += (brdv_len >> UFS_GEOMETRY_CAPACITY_SHIFT);
+ u->geometry_desc.total_raw_device_capacity = cpu_to_be64(raw_dev_cap);
+ return true;
+}
+
+static inline uint8_t ufs_log2(uint64_t input)
+{
+ int log = 1;
+ while (input >> log) {
+ log++;
+ }
+ return log;
+}
+
+static void ufs_init_lu(UfsLu *lu)
+{
+ BlockBackend *blk = lu->qdev.conf.blk;
+ int64_t brdv_len = blk_getlength(blk);
+
+ lu->lun = lu->qdev.lun;
+ memset(&lu->unit_desc, 0, sizeof(lu->unit_desc));
+ lu->unit_desc.length = sizeof(UnitDescriptor);
+ lu->unit_desc.descriptor_idn = QUERY_DESC_IDN_UNIT;
+ lu->unit_desc.lu_enable = 0x01;
+ lu->unit_desc.logical_block_size = ufs_log2(lu->qdev.blocksize);
+ lu->unit_desc.unit_index = lu->qdev.lun;
+ lu->unit_desc.logical_block_count =
+ cpu_to_be64(brdv_len / (1 << lu->unit_desc.logical_block_size));
+}
+
+static bool ufs_lu_check_constraints(UfsLu *lu, Error **errp)
+{
+ if (!blk_is_available(lu->qdev.conf.blk)) {
+ error_setg(errp, "block backend not configured");
+ return false;
+ }
+
+ if (lu->qdev.channel != 0) {
+ error_setg(errp, "ufs logical unit does not support channel");
+ return false;
+ }
+
+ if (lu->qdev.lun >= UFS_MAX_LUS) {
+ error_setg(errp, "lun must be between 1 and %d", UFS_MAX_LUS - 1);
+ return false;
+ }
+
+ return true;
+}
+
+static void ufs_lu_realize(SCSIDevice *dev, Error **errp)
+{
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, dev);
+ BusState *s = qdev_get_parent_bus(&dev->qdev);
+ UfsHc *u = UFS(s->parent);
+ AioContext *ctx = NULL;
+ uint64_t nb_sectors, nb_blocks;
+
+ if (!ufs_lu_check_constraints(lu, errp)) {
+ return;
+ }
+
+ if (lu->qdev.conf.blk) {
+ ctx = blk_get_aio_context(lu->qdev.conf.blk);
+ aio_context_acquire(ctx);
+ if (!blkconf_blocksizes(&lu->qdev.conf, errp)) {
+ goto out;
+ }
+ }
+ lu->qdev.blocksize = lu->qdev.conf.logical_block_size;
+ blk_get_geometry(lu->qdev.conf.blk, &nb_sectors);
+ nb_blocks = nb_sectors / (lu->qdev.blocksize / BDRV_SECTOR_SIZE) - 1;
+ if (nb_blocks > UINT32_MAX) {
+ nb_blocks = UINT32_MAX;
+ }
+ lu->qdev.max_lba = nb_blocks;
+ lu->qdev.type = TYPE_DISK;
+
+ ufs_init_lu(lu);
+ if (!ufs_add_lu(u, lu, errp)) {
+ goto out;
+ }
+
+ ufs_lu_brdv_init(lu, errp);
+out:
+ if (ctx) {
+ aio_context_release(ctx);
+ }
+}
+
+static void ufs_lu_unrealize(SCSIDevice *dev)
+{
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, dev);
+
+ blk_drain(lu->qdev.conf.blk);
+}
+
+static void ufs_wlu_realize(DeviceState *qdev, Error **errp)
+{
+ UfsWLu *wlu = UFSWLU(qdev);
+ SCSIDevice *dev = &wlu->qdev;
+
+ if (!is_wlun(dev->lun)) {
+ error_setg(errp, "not well-known logical unit number");
+ return;
+ }
+
+ QTAILQ_INIT(&dev->requests);
+}
+
+static void ufs_lu_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(oc);
+
+ sc->realize = ufs_lu_realize;
+ sc->unrealize = ufs_lu_unrealize;
+ sc->alloc_req = scsi_new_request;
+ dc->bus_type = TYPE_UFS_BUS;
+ device_class_set_props(dc, ufs_lu_props);
+ dc->desc = "Virtual UFS logical unit";
+}
+
+static void ufs_wlu_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(oc);
+
+ /*
+ * The realize() function of TYPE_SCSI_DEVICE causes a segmentation fault
+ * if a block drive does not exist. Define a new realize function for
+ * well-known LUs that do not have a block drive.
+ */
+ dc->realize = ufs_wlu_realize;
+ sc->alloc_req = scsi_new_request;
+ dc->bus_type = TYPE_UFS_BUS;
+ dc->desc = "Virtual UFS well-known logical unit";
+}
+
+static const TypeInfo ufs_lu_info = {
+ .name = TYPE_UFS_LU,
+ .parent = TYPE_SCSI_DEVICE,
+ .class_init = ufs_lu_class_init,
+ .instance_size = sizeof(UfsLu),
+};
+
+static const TypeInfo ufs_wlu_info = {
+ .name = TYPE_UFS_WLU,
+ .parent = TYPE_SCSI_DEVICE,
+ .class_init = ufs_wlu_class_init,
+ .instance_size = sizeof(UfsWLu),
+};
+
+static void ufs_lu_register_types(void)
+{
+ type_register_static(&ufs_lu_info);
+ type_register_static(&ufs_wlu_info);
+}
+
+type_init(ufs_lu_register_types)
diff --git a/hw/ufs/meson.build b/hw/ufs/meson.build
index c1d90eeea6..9953b4fd9b 100644
--- a/hw/ufs/meson.build
+++ b/hw/ufs/meson.build
@@ -1 +1 @@
-softmmu_ss.add(when: 'CONFIG_UFS_PCI', if_true: files('ufs.c'))
+softmmu_ss.add(when: 'CONFIG_UFS_PCI', if_true: files('ufs.c', 'lu.c'))
diff --git a/hw/ufs/trace-events b/hw/ufs/trace-events
index 97cf6664b9..5a4018ca5d 100644
--- a/hw/ufs/trace-events
+++ b/hw/ufs/trace-events
@@ -12,6 +12,31 @@ ufs_exec_scsi_cmd(uint32_t slot, uint8_t lun, uint8_t
opcode) "slot %"PRIu32", l
ufs_exec_query_cmd(uint32_t slot, uint8_t opcode) "slot %"PRIu32", opcode
0x%"PRIx8""
ufs_process_uiccmd(uint32_t uiccmd, uint32_t ucmdarg1, uint32_t ucmdarg2,
uint32_t ucmdarg3) "uiccmd 0x%"PRIx32", ucmdarg1 0x%"PRIx32", ucmdarg2
0x%"PRIx32", ucmdarg3 0x%"PRIx32""
+# lu.c
+ufs_scsi_check_condition(uint32_t tag, uint8_t key, uint8_t asc, uint8_t ascq)
"Command complete tag=0x%x sense=%d/%d/%d"
+ufs_scsi_read_complete(uint32_t tag, size_t size) "Data ready tag=0x%x len=%zd"
+ufs_scsi_read_data_count(uint32_t sector_count) "Read sector_count=%d"
+ufs_scsi_read_data_invalid(void) "Data transfer direction invalid"
+ufs_scsi_write_complete_noio(uint32_t tag, size_t size) "Write complete
tag=0x%x more=%zd"
+ufs_scsi_write_data_invalid(void) "Data transfer direction invalid"
+ufs_scsi_emulate_vpd_page_00(size_t xfer) "Inquiry EVPD[Supported pages]
buffer size %zd"
+ufs_scsi_emulate_vpd_page_80_not_supported(void) "Inquiry EVPD[Serial number]
not supported"
+ufs_scsi_emulate_vpd_page_80(size_t xfer) "Inquiry EVPD[Serial number] buffer
size %zd"
+ufs_scsi_emulate_vpd_page_87(size_t xfer) "Inquiry EVPD[Mode Page Policy]
buffer size %zd"
+ufs_scsi_emulate_mode_sense(int cmd, int page, size_t xfer, int control) "Mode
Sense(%d) (page %d, xfer %zd, page_control %d)"
+ufs_scsi_emulate_read_data(int buflen) "Read buf_len=%d"
+ufs_scsi_emulate_write_data(int buflen) "Write buf_len=%d"
+ufs_scsi_emulate_command_START_STOP(void) "START STOP UNIT"
+ufs_scsi_emulate_command_FORMAT_UNIT(void) "FORMAT UNIT"
+ufs_scsi_emulate_command_SEND_DIAGNOSTIC(void) "SEND DIAGNOSTIC"
+ufs_scsi_emulate_command_SAI_16(void) "SAI READ CAPACITY(16)"
+ufs_scsi_emulate_command_SAI_unsupported(void) "Unsupported Service Action In"
+ufs_scsi_emulate_command_MODE_SELECT_10(size_t xfer) "Mode Select(10) (len
%zd)"
+ufs_scsi_emulate_command_VERIFY(int bytchk) "Verify (bytchk %d)"
+ufs_scsi_emulate_command_UNKNOWN(int cmd, const char *name) "Unknown SCSI
command (0x%2.2x=%s)"
+ufs_scsi_dma_command_READ(uint64_t lba, uint32_t len) "Read (block %" PRIu64
", count %u)"
+ufs_scsi_dma_command_WRITE(uint64_t lba, int len) "Write (block %" PRIu64 ",
count %u)"
+
# error condition
ufs_err_memory_allocation(void) "failed to allocate memory"
ufs_err_dma_read_utrd(uint32_t slot, uint64_t addr) "failed to read utrd.
UTRLDBR slot %"PRIu32", UTRD dma addr %"PRIu64""
diff --git a/hw/ufs/ufs.c b/hw/ufs/ufs.c
index 2b564141c6..81dbe7ff03 100644
--- a/hw/ufs/ufs.c
+++ b/hw/ufs/ufs.c
@@ -8,6 +8,19 @@
* SPDX-License-Identifier: GPL-2.0-or-later
*/
+/**
+ * Reference Specs: https://www.jedec.org/, 3.1
+ *
+ * Usage
+ * -----
+ *
+ * Add options:
+ * -drive file=<file>,if=none,id=<drive_id>
+ * -device ufs,serial=<serial>,id=<bus_name>, \
+ * nutrs=<N[optional]>,nutmrs=<N[optional]>
+ * -device ufs-lu,drive=<drive_id>,bus=<bus_name>
+ */
+
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "migration/vmstate.h"
@@ -461,6 +474,19 @@ static const MemoryRegionOps ufs_mmio_ops = {
},
};
+static QEMUSGList *ufs_get_sg_list(SCSIRequest *scsi_req)
+{
+ UfsRequest *req = scsi_req->hba_private;
+ return req->sg;
+}
+
+static void ufs_build_upiu_sense_data(UfsRequest *req, SCSIRequest *scsi_req)
+{
+ req->rsp_upiu.sr.sense_data_len = cpu_to_be16(scsi_req->sense_len);
+ assert(scsi_req->sense_len <= SCSI_SENSE_LEN);
+ memcpy(req->rsp_upiu.sr.sense_data, scsi_req->sense, scsi_req->sense_len);
+}
+
static void ufs_build_upiu_header(UfsRequest *req, uint8_t trans_type,
uint8_t flags, uint8_t response,
uint8_t scsi_status,
@@ -474,6 +500,98 @@ static void ufs_build_upiu_header(UfsRequest *req, uint8_t
trans_type,
req->rsp_upiu.header.data_segment_length =
cpu_to_be16(data_segment_length);
}
+static void ufs_scsi_command_complete(SCSIRequest *scsi_req, size_t resid)
+{
+ UfsRequest *req = scsi_req->hba_private;
+ int16_t status = scsi_req->status;
+ uint32_t expected_len =
be32_to_cpu(req->req_upiu.sc.exp_data_transfer_len);
+ uint32_t transfered_len = scsi_req->cmd.xfer - resid;
+ uint8_t flags = 0, response = COMMAND_RESULT_SUCESS;
+ uint16_t data_segment_length;
+
+ if (expected_len > transfered_len) {
+ req->rsp_upiu.sr.residual_transfer_count =
+ cpu_to_be32(expected_len - transfered_len);
+ flags |= UFS_UPIU_FLAG_UNDERFLOW;
+ } else if (expected_len < transfered_len) {
+ req->rsp_upiu.sr.residual_transfer_count =
+ cpu_to_be32(transfered_len - expected_len);
+ flags |= UFS_UPIU_FLAG_OVERFLOW;
+ }
+
+ if (status != 0) {
+ ufs_build_upiu_sense_data(req, scsi_req);
+ response = COMMAND_RESULT_FAIL;
+ }
+
+ data_segment_length = cpu_to_be16(scsi_req->sense_len +
+ sizeof(req->rsp_upiu.sr.sense_data_len));
+ ufs_build_upiu_header(req, UPIU_TRANSACTION_RESPONSE, flags, response,
+ status, data_segment_length);
+
+ ufs_complete_req(req, UFS_REQUEST_SUCCESS);
+
+ scsi_req->hba_private = NULL;
+ scsi_req_unref(scsi_req);
+}
+
+static const struct SCSIBusInfo ufs_scsi_info = {
+ .tcq = true,
+ .max_target = 0,
+ .max_lun = UFS_MAX_LUS,
+ .max_channel = 0,
+
+ .get_sg_list = ufs_get_sg_list,
+ .complete = ufs_scsi_command_complete,
+};
+
+static UfsReqResult ufs_exec_scsi_cmd(UfsRequest *req)
+{
+ UfsHc *u = req->hc;
+ uint8_t lun = req->req_upiu.header.lun;
+ uint8_t task_tag = req->req_upiu.header.task_tag;
+ SCSIDevice *dev = NULL;
+
+ trace_ufs_exec_scsi_cmd(req->slot, lun, req->req_upiu.sc.cdb[0]);
+
+ if (!is_wlun(lun)) {
+ if (lun >= u->device_desc.number_lu) {
+ trace_ufs_err_scsi_cmd_invalid_lun(lun);
+ return UFS_REQUEST_ERROR;
+ } else if (u->lus[lun] == NULL) {
+ trace_ufs_err_scsi_cmd_invalid_lun(lun);
+ return UFS_REQUEST_ERROR;
+ }
+ }
+
+ switch (lun) {
+ case UFS_UPIU_REPORT_LUNS_WLUN:
+ dev = &u->report_wlu->qdev;
+ break;
+ case UFS_UPIU_UFS_DEVICE_WLUN:
+ dev = &u->dev_wlu->qdev;
+ break;
+ case UFS_UPIU_BOOT_WLUN:
+ dev = &u->boot_wlu->qdev;
+ break;
+ case UFS_UPIU_RPMB_WLUN:
+ dev = &u->rpmb_wlu->qdev;
+ break;
+ default:
+ dev = &u->lus[lun]->qdev;
+ }
+
+ SCSIRequest *scsi_req = scsi_req_new(
+ dev, task_tag, lun, req->req_upiu.sc.cdb, UFS_CDB_SIZE, req);
+
+ uint32_t len = scsi_req_enqueue(scsi_req);
+ if (len) {
+ scsi_req_continue(scsi_req);
+ }
+
+ return UFS_REQUEST_NO_COMPLETE;
+}
+
static UfsReqResult ufs_exec_nop_cmd(UfsRequest *req)
{
trace_ufs_exec_nop_cmd(req->slot);
@@ -751,9 +869,11 @@ static const RpmbUnitDescriptor rpmb_unit_desc = {
static QueryRespCode ufs_read_unit_desc(UfsRequest *req)
{
+ UfsHc *u = req->hc;
uint8_t lun = req->req_upiu.qr.index;
- if (lun != UFS_UPIU_RPMB_WLUN && lun > UFS_MAX_LUS) {
+ if (lun != UFS_UPIU_RPMB_WLUN &&
+ (lun > UFS_MAX_LUS || u->lus[lun] == NULL)) {
trace_ufs_err_query_invalid_index(req->req_upiu.qr.opcode, lun);
return QUERY_RESULT_INVALID_INDEX;
}
@@ -761,8 +881,8 @@ static QueryRespCode ufs_read_unit_desc(UfsRequest *req)
if (lun == UFS_UPIU_RPMB_WLUN) {
memcpy(&req->rsp_upiu.qr.data, &rpmb_unit_desc, rpmb_unit_desc.length);
} else {
- /* unit descriptor is not yet supported */
- return QUERY_RESULT_INVALID_INDEX;
+ memcpy(&req->rsp_upiu.qr.data, &u->lus[lun]->unit_desc,
+ sizeof(u->lus[lun]->unit_desc));
}
return QUERY_RESULT_SUCCESS;
@@ -1012,8 +1132,7 @@ static void ufs_exec_req(UfsRequest *req)
req_result = ufs_exec_nop_cmd(req);
break;
case UPIU_TRANSACTION_COMMAND:
- /* Not yet implemented */
- req_result = UFS_REQUEST_FAIL;
+ req_result = ufs_exec_scsi_cmd(req);
break;
case UPIU_TRANSACTION_QUERY_REQ:
req_result = ufs_exec_query_cmd(req);
@@ -1024,7 +1143,14 @@ static void ufs_exec_req(UfsRequest *req)
req_result = UFS_REQUEST_FAIL;
}
- ufs_complete_req(req, req_result);
+ /*
+ * The ufs_complete_req for scsi commands is handled by the
+ * ufs_scsi_command_complete() callback function. Therefore, to avoid
+ * duplicate processing, ufs_complete_req() is not called for scsi
commands.
+ */
+ if (req_result != UFS_REQUEST_NO_COMPLETE) {
+ ufs_complete_req(req, req_result);
+ }
}
static void ufs_process_req(void *opaque)
@@ -1234,6 +1360,28 @@ static void ufs_init_hc(UfsHc *u)
u->flags.permanently_disable_fw_update = 1;
}
+static bool ufs_init_wlu(UfsHc *u, UfsWLu **wlu, uint8_t wlun, Error **errp)
+{
+ UfsWLu *new_wlu = UFSWLU(qdev_new(TYPE_UFS_WLU));
+
+ qdev_prop_set_uint32(DEVICE(new_wlu), "lun", wlun);
+
+ /*
+ * The well-known lu shares the same bus as the normal lu. If the
well-known
+ * lu writes the same channel value as the normal lu, the report will be
+ * made not only for the normal lu but also for the well-known lu at
+ * REPORT_LUN time. To prevent this, the channel value of normal lu is
fixed
+ * to 0 and the channel value of well-known lu is fixed to 1.
+ */
+ qdev_prop_set_uint32(DEVICE(new_wlu), "channel", 1);
+ if (!qdev_realize_and_unref(DEVICE(new_wlu), BUS(&u->bus), errp)) {
+ return false;
+ }
+
+ *wlu = new_wlu;
+ return true;
+}
+
static void ufs_realize(PCIDevice *pci_dev, Error **errp)
{
UfsHc *u = UFS(pci_dev);
@@ -1242,15 +1390,55 @@ static void ufs_realize(PCIDevice *pci_dev, Error
**errp)
return;
}
+ qbus_init(&u->bus, sizeof(UfsBus), TYPE_UFS_BUS, &pci_dev->qdev,
+ u->parent_obj.qdev.id);
+ u->bus.parent_bus.info = &ufs_scsi_info;
+
ufs_init_state(u);
ufs_init_hc(u);
ufs_init_pci(u, pci_dev);
+
+ if (!ufs_init_wlu(u, &u->report_wlu, UFS_UPIU_REPORT_LUNS_WLUN, errp)) {
+ return;
+ }
+
+ if (!ufs_init_wlu(u, &u->dev_wlu, UFS_UPIU_UFS_DEVICE_WLUN, errp)) {
+ return;
+ }
+
+ if (!ufs_init_wlu(u, &u->boot_wlu, UFS_UPIU_BOOT_WLUN, errp)) {
+ return;
+ }
+
+ if (!ufs_init_wlu(u, &u->rpmb_wlu, UFS_UPIU_RPMB_WLUN, errp)) {
+ return;
+ }
}
static void ufs_exit(PCIDevice *pci_dev)
{
UfsHc *u = UFS(pci_dev);
+ if (u->dev_wlu) {
+ object_unref(OBJECT(u->dev_wlu));
+ u->dev_wlu = NULL;
+ }
+
+ if (u->report_wlu) {
+ object_unref(OBJECT(u->report_wlu));
+ u->report_wlu = NULL;
+ }
+
+ if (u->rpmb_wlu) {
+ object_unref(OBJECT(u->rpmb_wlu));
+ u->rpmb_wlu = NULL;
+ }
+
+ if (u->boot_wlu) {
+ object_unref(OBJECT(u->boot_wlu));
+ u->boot_wlu = NULL;
+ }
+
qemu_bh_delete(u->doorbell_bh);
qemu_bh_delete(u->complete_bh);
@@ -1289,6 +1477,49 @@ static void ufs_class_init(ObjectClass *oc, void *data)
dc->vmsd = &ufs_vmstate;
}
+static bool ufs_bus_check_address(BusState *qbus, DeviceState *qdev,
+ Error **errp)
+{
+ SCSIDevice *dev = SCSI_DEVICE(qdev);
+ UfsBusClass *ubc = UFS_BUS_GET_CLASS(qbus);
+ UfsHc *u = UFS(qbus->parent);
+
+ if (strcmp(object_get_typename(OBJECT(dev)), TYPE_UFS_WLU) == 0) {
+ if (dev->lun != UFS_UPIU_REPORT_LUNS_WLUN &&
+ dev->lun != UFS_UPIU_UFS_DEVICE_WLUN &&
+ dev->lun != UFS_UPIU_BOOT_WLUN && dev->lun != UFS_UPIU_RPMB_WLUN) {
+ error_setg(errp, "bad well-known lun: %d", dev->lun);
+ return false;
+ }
+
+ if ((dev->lun == UFS_UPIU_REPORT_LUNS_WLUN && u->report_wlu != NULL) ||
+ (dev->lun == UFS_UPIU_UFS_DEVICE_WLUN && u->dev_wlu != NULL) ||
+ (dev->lun == UFS_UPIU_BOOT_WLUN && u->boot_wlu != NULL) ||
+ (dev->lun == UFS_UPIU_RPMB_WLUN && u->rpmb_wlu != NULL)) {
+ error_setg(errp, "well-known lun %d already exists", dev->lun);
+ return false;
+ }
+
+ return true;
+ }
+
+ if (strcmp(object_get_typename(OBJECT(dev)), TYPE_UFS_LU) != 0) {
+ error_setg(errp, "%s cannot be connected to ufs-bus",
+ object_get_typename(OBJECT(dev)));
+ return false;
+ }
+
+ return ubc->parent_check_address(qbus, qdev, errp);
+}
+
+static void ufs_bus_class_init(ObjectClass *class, void *data)
+{
+ BusClass *bc = BUS_CLASS(class);
+ UfsBusClass *ubc = UFS_BUS_CLASS(class);
+ ubc->parent_check_address = bc->check_address;
+ bc->check_address = ufs_bus_check_address;
+}
+
static const TypeInfo ufs_info = {
.name = TYPE_UFS,
.parent = TYPE_PCI_DEVICE,
@@ -1297,9 +1528,18 @@ static const TypeInfo ufs_info = {
.interfaces = (InterfaceInfo[]){ { INTERFACE_PCIE_DEVICE }, {} },
};
+static const TypeInfo ufs_bus_info = {
+ .name = TYPE_UFS_BUS,
+ .parent = TYPE_SCSI_BUS,
+ .class_init = ufs_bus_class_init,
+ .class_size = sizeof(UfsBusClass),
+ .instance_size = sizeof(UfsBus),
+};
+
static void ufs_register_types(void)
{
type_register_static(&ufs_info);
+ type_register_static(&ufs_bus_info);
}
type_init(ufs_register_types)
diff --git a/hw/ufs/ufs.h b/hw/ufs/ufs.h
index 869361447f..7c85066f28 100644
--- a/hw/ufs/ufs.h
+++ b/hw/ufs/ufs.h
@@ -18,6 +18,18 @@
#define UFS_MAX_LUS 32
#define UFS_LOGICAL_BLK_SIZE 4096
+typedef struct UfsBusClass {
+ BusClass parent_class;
+ bool (*parent_check_address)(BusState *bus, DeviceState *dev, Error
**errp);
+} UfsBusClass;
+
+typedef struct UfsBus {
+ SCSIBus parent_bus;
+} UfsBus;
+
+#define TYPE_UFS_BUS "ufs-bus"
+DECLARE_OBJ_CHECKERS(UfsBus, UfsBusClass, UFS_BUS, TYPE_UFS_BUS)
+
typedef enum UfsRequestState {
UFS_REQUEST_IDLE = 0,
UFS_REQUEST_READY = 1,
@@ -29,6 +41,7 @@ typedef enum UfsRequestState {
typedef enum UfsReqResult {
UFS_REQUEST_SUCCESS = 0,
UFS_REQUEST_FAIL = 1,
+ UFS_REQUEST_NO_COMPLETE = 2,
} UfsReqResult;
typedef struct UfsRequest {
@@ -44,6 +57,17 @@ typedef struct UfsRequest {
QEMUSGList *sg;
} UfsRequest;
+typedef struct UfsLu {
+ SCSIDevice qdev;
+ uint8_t lun;
+ UnitDescriptor unit_desc;
+} UfsLu;
+
+typedef struct UfsWLu {
+ SCSIDevice qdev;
+ uint8_t lun;
+} UfsWLu;
+
typedef struct UfsParams {
char *serial;
uint8_t nutrs; /* Number of UTP Transfer Request Slots */
@@ -52,12 +76,18 @@ typedef struct UfsParams {
typedef struct UfsHc {
PCIDevice parent_obj;
+ UfsBus bus;
MemoryRegion iomem;
UfsReg reg;
UfsParams params;
uint32_t reg_size;
UfsRequest *req_list;
+ UfsLu *lus[UFS_MAX_LUS];
+ UfsWLu *report_wlu;
+ UfsWLu *dev_wlu;
+ UfsWLu *boot_wlu;
+ UfsWLu *rpmb_wlu;
DeviceDescriptor device_desc;
GeometryDescriptor geometry_desc;
Attributes attributes;
@@ -71,6 +101,12 @@ typedef struct UfsHc {
#define TYPE_UFS "ufs"
#define UFS(obj) OBJECT_CHECK(UfsHc, (obj), TYPE_UFS)
+#define TYPE_UFS_LU "ufs-lu"
+#define UFSLU(obj) OBJECT_CHECK(UfsLu, (obj), TYPE_UFS_LU)
+
+#define TYPE_UFS_WLU "ufs-wlu"
+#define UFSWLU(obj) OBJECT_CHECK(UfsWLu, (obj), TYPE_UFS_WLU)
+
typedef enum UfsQueryFlagPerm {
UFS_QUERY_FLAG_NONE = 0x0,
UFS_QUERY_FLAG_READ = 0x1,
@@ -85,4 +121,11 @@ typedef enum UfsQueryAttrPerm {
UFS_QUERY_ATTR_WRITE = 0x2,
} UfsQueryAttrPerm;
+static inline bool is_wlun(uint8_t lun)
+{
+ return (lun == UFS_UPIU_REPORT_LUNS_WLUN ||
+ lun == UFS_UPIU_UFS_DEVICE_WLUN || lun == UFS_UPIU_BOOT_WLUN ||
+ lun == UFS_UPIU_RPMB_WLUN);
+}
+
#endif /* HW_UFS_UFS_H */
diff --git a/include/scsi/constants.h b/include/scsi/constants.h
index 6a8bad556a..9b98451912 100644
--- a/include/scsi/constants.h
+++ b/include/scsi/constants.h
@@ -231,6 +231,7 @@
#define MODE_PAGE_FLEXIBLE_DISK_GEOMETRY 0x05
#define MODE_PAGE_CACHING 0x08
#define MODE_PAGE_AUDIO_CTL 0x0e
+#define MODE_PAGE_CONTROL 0x0a
#define MODE_PAGE_POWER 0x1a
#define MODE_PAGE_FAULT_FAIL 0x1c
#define MODE_PAGE_TO_PROTECT 0x1d
--
2.34.1