Re: [PATCH v9 0/5] Support x2APIC mode with TCG accelerator

[Santosh Shukla]

On 10/24/2023 8:51 PM, Bui Quang Minh wrote:
> Hi everyone,
> 
> This series implements x2APIC mode in userspace local APIC and the
> RDMSR/WRMSR helper to access x2APIC registers in x2APIC mode. Intel iommu
> and AMD iommu are adjusted to support x2APIC interrupt remapping. With this
> series, we can now boot Linux kernel into x2APIC mode with TCG accelerator
> using either Intel or AMD iommu.
> 
> Testing to boot my own built Linux 6.3.0-rc2, the kernel successfully boot
> with enabled x2APIC and can enumerate CPU with APIC ID 257
> 
> Using Intel IOMMU
> 
> qemu/build/qemu-system-x86_64 \
>   -smp 2,maxcpus=260 \
>   -cpu qemu64,x2apic=on \
>   -machine q35 \
>   -device intel-iommu,intremap=on,eim=on \
>   -device qemu64-x86_64-cpu,x2apic=on,core-id=257,socket-id=0,thread-id=0 \
>   -m 2G \
>   -kernel $KERNEL_DIR \
>   -append "nokaslr console=ttyS0 root=/dev/sda earlyprintk=serial 
> net.ifnames=0" \
>   -drive file=$IMAGE_DIR,format=raw \
>   -nographic \
>   -s
> 
> Using AMD IOMMU
> 
> qemu/build/qemu-system-x86_64 \
>   -smp 2,maxcpus=260 \
>   -cpu qemu64,x2apic=on \
>   -machine q35 \
>   -device amd-iommu,intremap=on,xtsup=on \
>   -device qemu64-x86_64-cpu,x2apic=on,core-id=257,socket-id=0,thread-id=0 \
>   -m 2G \
>   -kernel $KERNEL_DIR \
>   -append "nokaslr console=ttyS0 root=/dev/sda earlyprintk=serial 
> net.ifnames=0" \
>   -drive file=$IMAGE_DIR,format=raw \
>   -nographic \
>   -s
> 
> Testing the emulated userspace APIC with kvm-unit-tests, disable test
> device with this patch
> 
> diff --git a/lib/x86/fwcfg.c b/lib/x86/fwcfg.c
> index 1734afb..f56fe1c 100644
> --- a/lib/x86/fwcfg.c
> +++ b/lib/x86/fwcfg.c
> @@ -27,6 +27,7 @@ static void read_cfg_override(void)
> 
>         if ((str = getenv("TEST_DEVICE")))
>                 no_test_device = !atol(str);
> +       no_test_device = true;
> 
>         if ((str = getenv("MEMLIMIT")))
>                 fw_override[FW_CFG_MAX_RAM] = atol(str) * 1024 * 1024;
> 
> ~ env QEMU=/home/minh/Desktop/oss/qemu/build/qemu-system-x86_64 ACCEL=tcg \
> ./run_tests.sh -v -g apic
> 
> TESTNAME=apic-split TIMEOUT=90s ACCEL=tcg ./x86/run x86/apic.flat -smp 2
> -cpu qemu64,+x2apic,+tsc-deadline -machine kernel_irqchip=split FAIL
> apic-split (54 tests, 8 unexpected failures, 1 skipped)
> TESTNAME=ioapic-split TIMEOUT=90s ACCEL=tcg ./x86/run x86/ioapic.flat -smp
> 1 -cpu qemu64 -machine kernel_irqchip=split PASS ioapic-split (19 tests)
> TESTNAME=x2apic TIMEOUT=30 ACCEL=tcg ./x86/run x86/apic.flat -smp 2 -cpu
> qemu64,+x2apic,+tsc-deadline FAIL x2apic (54 tests, 8 unexpected failures,
> 1 skipped) TESTNAME=xapic TIMEOUT=60 ACCEL=tcg ./x86/run x86/apic.flat -smp
> 2 -cpu qemu64,-x2apic,+tsc-deadline -machine pit=off FAIL xapic (43 tests,
> 6 unexpected failures, 2 skipped)
> 
>   FAIL: apic_disable: *0xfee00030: 50014
>   FAIL: apic_disable: *0xfee00080: f0
>   FAIL: apic_disable: *0xfee00030: 50014
>   FAIL: apic_disable: *0xfee00080: f0
>   FAIL: apicbase: relocate apic
> 
> These errors are because we don't disable MMIO region when switching to
> x2APIC and don't support relocate MMIO region yet. This is a problem
> because, MMIO region is the same for all CPUs, in order to support these we
> need to figure out how to allocate and manage different MMIO regions for
> each CPUs. This can be an improvement in the future.
> 
>   FAIL: nmi-after-sti
>   FAIL: multiple nmi
> 
> These errors are in the way we handle CPU_INTERRUPT_NMI in core TCG.
> 
>   FAIL: TMCCT should stay at zero
> 
> This error is related to APIC timer which should be addressed in separate
> patch.
> 
> Version 9 changes,

Hi Bui,

I have tested v9 on EPYC-Genoa system with kvm acceleration mode on, I could
see > 255 vCPU for Linux and Windows Guest.

Tested-by: Santosh Shukla <Santosh.Shukla@amd.com>

Thanks,
Santosh