qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v1 15/17] intel_iommu: Set default aw_bits to 48 in scalable


From: CLEMENT MATHIEU--DRIF
Subject: Re: [PATCH v1 15/17] intel_iommu: Set default aw_bits to 48 in scalable modren mode
Date: Thu, 18 Jul 2024 09:14:02 +0000

Reviewed-by: Clément Mathieu--Drif<clement.mathieu--drif@eviden.com>



On 18/07/2024 10:16, Zhenzhong Duan wrote:
> Caution: External email. Do not open attachments or click links, unless this 
> email comes from a known sender and you know the content is safe.
>
>
> According to VTD spec, stage-1 page table could support 4-level and
> 5-level paging.
>
> However, 5-level paging translation emulation is unsupported yet.
> That means the only supported value for aw_bits is 48.
>
> So default aw_bits to 48 in scalable modern mode. In other cases,
> it is still default to 39 for compatibility.
>
> Add a check to ensure user specified value is 48 in modern mode
> for now.
>
> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
> ---
>   include/hw/i386/intel_iommu.h |  2 +-
>   hw/i386/intel_iommu.c         | 16 +++++++++++++++-
>   2 files changed, 16 insertions(+), 2 deletions(-)
>
> diff --git a/include/hw/i386/intel_iommu.h b/include/hw/i386/intel_iommu.h
> index b843d069cc..48134bda11 100644
> --- a/include/hw/i386/intel_iommu.h
> +++ b/include/hw/i386/intel_iommu.h
> @@ -45,7 +45,7 @@ OBJECT_DECLARE_SIMPLE_TYPE(IntelIOMMUState, 
> INTEL_IOMMU_DEVICE)
>   #define DMAR_REG_SIZE               0x230
>   #define VTD_HOST_AW_39BIT           39
>   #define VTD_HOST_AW_48BIT           48
> -#define VTD_HOST_ADDRESS_WIDTH      VTD_HOST_AW_39BIT
> +#define VTD_HOST_AW_AUTO            0xff
>   #define VTD_HAW_MASK(aw)            ((1ULL << (aw)) - 1)
>
>   #define DMAR_REPORT_F_INTR          (1)
> diff --git a/hw/i386/intel_iommu.c b/hw/i386/intel_iommu.c
> index c0116497b1..2804c3628a 100644
> --- a/hw/i386/intel_iommu.c
> +++ b/hw/i386/intel_iommu.c
> @@ -3768,7 +3768,7 @@ static Property vtd_properties[] = {
>                               ON_OFF_AUTO_AUTO),
>       DEFINE_PROP_BOOL("x-buggy-eim", IntelIOMMUState, buggy_eim, false),
>       DEFINE_PROP_UINT8("aw-bits", IntelIOMMUState, aw_bits,
> -                      VTD_HOST_ADDRESS_WIDTH),
> +                      VTD_HOST_AW_AUTO),
>       DEFINE_PROP_BOOL("caching-mode", IntelIOMMUState, caching_mode, FALSE),
>       DEFINE_PROP_BOOL("x-scalable-mode", IntelIOMMUState, scalable_mode, 
> FALSE),
>       DEFINE_PROP_BOOL("snoop-control", IntelIOMMUState, snoop_control, 
> false),
> @@ -4686,6 +4686,14 @@ static bool vtd_decide_config(IntelIOMMUState *s, 
> Error **errp)
>           }
>       }
>
> +    if (s->aw_bits == VTD_HOST_AW_AUTO) {
> +        if (s->scalable_modern) {
> +            s->aw_bits = VTD_HOST_AW_48BIT;
> +        } else {
> +            s->aw_bits = VTD_HOST_AW_39BIT;
> +        }
> +    }
> +
>       if ((s->aw_bits != VTD_HOST_AW_39BIT) &&
>           (s->aw_bits != VTD_HOST_AW_48BIT) &&
>           !s->scalable_modern) {
> @@ -4694,6 +4702,12 @@ static bool vtd_decide_config(IntelIOMMUState *s, 
> Error **errp)
>           return false;
>       }
>
> +    if ((s->aw_bits != VTD_HOST_AW_48BIT) && s->scalable_modern) {
> +        error_setg(errp, "Supported values for aw-bits are: %d",
> +                   VTD_HOST_AW_48BIT);
> +        return false;
> +    }
> +
>       if (s->scalable_mode && !s->dma_drain) {
>           error_setg(errp, "Need to set dma_drain for scalable mode");
>           return false;
> --
> 2.34.1
>

reply via email to

[Prev in Thread] Current Thread [Next in Thread]