qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v3 0/9] XIVE changes for Cache Watch, VSTs, STT and info pic


From: Nicholas Piggin
Subject: Re: [PATCH v3 0/9] XIVE changes for Cache Watch, VSTs, STT and info pic
Date: Fri, 19 Jul 2024 17:17:47 +1000

On Fri Jul 19, 2024 at 2:38 AM AEST, Mike Kowal wrote:
>
> On 7/16/2024 3:18 PM, Cédric Le Goater wrote:
> > Hello Mike,
> >
> > On 7/16/24 21:56, Michael Kowal wrote:
> >> These changes provide enhanced support of the External Interrupt 
> >> Virtualization
> >> Engine.  The changes are focused on the following areas:
> >>   - Cache Watch, Cache Flush and Sync Injection
> >>   - Virtual Structure Tables
> >>   - Set Translation Table
> >>   - 'info pic' command data that is dumped
> >>
> >> Frederic Barrat (7):
> >>    pnv/xive2: XIVE2 Cache Watch, Cache Flush and Sync Injection support
> >>    pnv/xive2: Add NVG and NVC to cache watch facility
> >>    pnv/xive2: Configure Virtualization Structure Tables through the PC
> >>    pnv/xive2: Enable VST NVG and NVC index compression
> >>    pnv/xive2: Set Translation Table for the NVC port space
> >>    pnv/xive2: Fail VST entry address computation if table has no VSD
> >>    pnv/xive2: Move xive2_nvp_pic_print_info() to xive2.c
> >>
> >> Michael Kowal (1):
> >>    pnv/xive2: Structure/define alignment changes
> >>
> >> Nicholas Piggin (1):
> >>    pnv/xive: Support cache flush and queue sync inject with 
> >> notifications
> >>
> >>   hw/intc/pnv_xive2_regs.h    | 108 +++++++
> >>   include/hw/ppc/pnv_chip.h   |   1 +
> >>   include/hw/ppc/xive2_regs.h |   9 +
> >>   hw/intc/pnv_xive2.c         | 566 ++++++++++++++++++++++++++++++------
> >>   hw/intc/xive.c              |  12 +-
> >>   hw/intc/xive2.c             |  33 ++-
> >>   6 files changed, 633 insertions(+), 96 deletions(-)
> >>
> >> -- 
> >> 2.43.0
> >>
> >
> > Hello Mike,
> >
> > When you respin a series, it is useful to update the individual
> > patches with the given R-b tags. To keep track of them, you can use
> > the b4 command :
> >     $ b4 am 20240715183332.27287-1-kowal@linux.vnet.ibm.com
> >   Grabbing thread from 
> > lore.kernel.org/all/20240715183332.27287-1-kowal@linux.vnet.ibm.com/t.mbox.gz
> >   Analyzing 23 messages in the thread
> >   Looking for additional code-review trailers on lore.kernel.org
> >   Checking attestation on all messages, may take a moment...
> >   ---
> >     ✓ [PATCH v2 1/9] pnv/xive2: XIVE2 Cache Watch, Cache Flush and 
> > Sync Injection support
> >     ✓ [PATCH v2 2/9] pnv/xive2: Structure/define alignment changes
> >       + Reviewed-by: Cédric Le Goater <clg@redhat.com>
> >     ✓ [PATCH v2 3/9] pnv/xive: Support cache flush and queue sync 
> > inject with notifications
> >     ✓ [PATCH v2 4/9] pnv/xive2: Add NVG and NVC to cache watch facility
> >     ✓ [PATCH v2 5/9] pnv/xive2: Configure Virtualization Structure 
> > Tables through the PC
> >       + Reviewed-by: Cédric Le Goater <clg@redhat.com>
> >     ✓ [PATCH v2 6/9] pnv/xive2: Enable VST NVG and NVC index compression
> >       + Reviewed-by: Cédric Le Goater <clg@redhat.com>
> >     ✓ [PATCH v2 7/9] pnv/xive2: Set Translation Table for the NVC port 
> > space
> >       + Reviewed-by: Cédric Le Goater <clg@redhat.com>
> >       + Reviewed-by: Cédric Le Goater <clg@kaod.org>
> >     ✓ [PATCH v2 8/9] pnv/xive2: Fail VST entry address computation if 
> > table has no VSD
> >       + Reviewed-by: Cédric Le Goater <clg@redhat.com>
> >       + Reviewed-by: Cédric Le Goater <clg@kaod.org>
> >     ✓ [PATCH v2 9/9] pnv/xive2: Move xive2_nvp_pic_print_info() to 
> > xive2.c
> >     ---
> >     ✓ Signed: DKIM/ibm.com (From: kowal@linux.vnet.ibm.com)
> >
> Thank you for the suggestion Cedric.  I can get `b4 am` to run but the 
> attestation (signature checking?) fails.  In the future I will post the 
> following, along with revision comments in the cover letter.  Following 

Hey Mike,

It's enough just that those 'Reviewed-by' lines are added to your
individual commit changelogs before you re-send. No need to send
the b4 output.

Thanks,
Nick



reply via email to

[Prev in Thread] Current Thread [Next in Thread]