[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL v2 13/61] hw/cxl/cxl-mailbox-utils: Add device DDR5 ECS control fe
From: |
Michael S. Tsirkin |
Subject: |
[PULL v2 13/61] hw/cxl/cxl-mailbox-utils: Add device DDR5 ECS control feature |
Date: |
Tue, 23 Jul 2024 06:56:16 -0400 |
From: Shiju Jose <shiju.jose@huawei.com>
CXL spec 3.1 section 8.2.9.9.11.2 describes the DDR5 Error Check Scrub (ECS)
control feature.
The Error Check Scrub (ECS) is a feature defined in JEDEC DDR5 SDRAM
Specification (JESD79-5) and allows the DRAM to internally read, correct
single-bit errors, and write back corrected data bits to the DRAM array
while providing transparency to error counts. The ECS control feature
allows the request to configure ECS input configurations during system
boot or at run-time.
The ECS control allows the requester to change the log entry type, the ECS
threshold count provided that the request is within the definition
specified in DDR5 mode registers, change mode between codeword mode and
row count mode, and reset the ECS counter.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://lore.kernel.org/r/20240223085902.1549-4-shiju.jose@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
include/hw/cxl/cxl_device.h | 24 +++++++++++++
hw/cxl/cxl-mailbox-utils.c | 71 +++++++++++++++++++++++++++++++++++++
hw/mem/cxl_type3.c | 14 ++++++++
3 files changed, 109 insertions(+)
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index 2c1df25453..5cae7159e6 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -447,6 +447,27 @@ typedef struct CXLMemPatrolScrubWriteAttrs {
#define CXL_MEMDEV_PS_MIN_SCRUB_CYCLE_DEFAULT 1
#define CXL_MEMDEV_PS_ENABLE_DEFAULT 0
+/* CXL memory device DDR5 ECS control attributes */
+typedef struct CXLMemECSReadAttrs {
+ uint8_t ecs_log_cap;
+ uint8_t ecs_cap;
+ uint16_t ecs_config;
+ uint8_t ecs_flags;
+} QEMU_PACKED CXLMemECSReadAttrs;
+
+typedef struct CXLMemECSWriteAttrs {
+ uint8_t ecs_log_cap;
+ uint16_t ecs_config;
+} QEMU_PACKED CXLMemECSWriteAttrs;
+
+#define CXL_ECS_GET_FEATURE_VERSION 0x01
+#define CXL_ECS_SET_FEATURE_VERSION 0x01
+#define CXL_ECS_LOG_ENTRY_TYPE_DEFAULT 0x01
+#define CXL_ECS_REALTIME_REPORT_CAP_DEFAULT 1
+#define CXL_ECS_THRESHOLD_COUNT_DEFAULT 3 /* 3: 256, 4: 1024, 5: 4096 */
+#define CXL_ECS_MODE_DEFAULT 0
+#define CXL_ECS_NUM_MEDIA_FRUS 3 /* Default */
+
#define DCD_MAX_NUM_REGION 8
typedef struct CXLDCExtentRaw {
@@ -534,6 +555,9 @@ struct CXLType3Dev {
/* Patrol scrub control attributes */
CXLMemPatrolScrubReadAttrs patrol_scrub_attrs;
CXLMemPatrolScrubWriteAttrs patrol_scrub_wr_attrs;
+ /* ECS control attributes */
+ CXLMemECSReadAttrs ecs_attrs[CXL_ECS_NUM_MEDIA_FRUS];
+ CXLMemECSWriteAttrs ecs_wr_attrs[CXL_ECS_NUM_MEDIA_FRUS];
struct dynamic_capacity {
HostMemoryBackend *host_dc;
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
index 485beb9dba..0621f686f4 100644
--- a/hw/cxl/cxl-mailbox-utils.c
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -825,6 +825,7 @@ typedef struct CXLSupportedFeatureEntry {
enum CXL_SUPPORTED_FEATURES_LIST {
CXL_FEATURE_PATROL_SCRUB = 0,
+ CXL_FEATURE_ECS,
CXL_FEATURE_MAX
};
@@ -877,6 +878,20 @@ typedef struct CXLMemPatrolScrubSetFeature {
CXLMemPatrolScrubWriteAttrs feat_data;
} QEMU_PACKED QEMU_ALIGNED(16) CXLMemPatrolScrubSetFeature;
+/*
+ * CXL r3.1 section 8.2.9.9.11.2:
+ * DDR5 Error Check Scrub (ECS) Control Feature
+ */
+static const QemuUUID ecs_uuid = {
+ .data = UUID(0xe5b13f22, 0x2328, 0x4a14, 0xb8, 0xba,
+ 0xb9, 0x69, 0x1e, 0x89, 0x33, 0x86)
+};
+
+typedef struct CXLMemECSSetFeature {
+ CXLSetFeatureInHeader hdr;
+ CXLMemECSWriteAttrs feat_data[];
+} QEMU_PACKED QEMU_ALIGNED(16) CXLMemECSSetFeature;
+
/* CXL r3.1 section 8.2.9.6.1: Get Supported Features (Opcode 0500h) */
static CXLRetCode cmd_features_get_supported(const struct cxl_cmd *cmd,
uint8_t *payload_in,
@@ -930,6 +945,23 @@ static CXLRetCode cmd_features_get_supported(const struct
cxl_cmd *cmd,
CXL_FEAT_ENTRY_SFE_CEL_VALID,
};
break;
+ case CXL_FEATURE_ECS:
+ /* Fill supported feature entry for device DDR5 ECS control */
+ get_feats_out->feat_entries[entry++] =
+ (struct CXLSupportedFeatureEntry) {
+ .uuid = ecs_uuid,
+ .feat_index = index,
+ .get_feat_size = CXL_ECS_NUM_MEDIA_FRUS *
+ sizeof(CXLMemECSReadAttrs),
+ .set_feat_size = CXL_ECS_NUM_MEDIA_FRUS *
+ sizeof(CXLMemECSWriteAttrs),
+ .attr_flags = CXL_FEAT_ENTRY_ATTR_FLAG_CHANGABLE,
+ .get_feat_version = CXL_ECS_GET_FEATURE_VERSION,
+ .set_feat_version = CXL_ECS_SET_FEATURE_VERSION,
+ .set_feat_effects = CXL_FEAT_ENTRY_SFE_IMMEDIATE_CONFIG_CHANGE
|
+ CXL_FEAT_ENTRY_SFE_CEL_VALID,
+ };
+ break;
default:
__builtin_unreachable();
}
@@ -989,6 +1021,18 @@ static CXLRetCode cmd_features_get_feature(const struct
cxl_cmd *cmd,
memcpy(payload_out,
(uint8_t *)&ct3d->patrol_scrub_attrs + get_feature->offset,
bytes_to_copy);
+ } else if (qemu_uuid_is_equal(&get_feature->uuid, &ecs_uuid)) {
+ if (get_feature->offset >= CXL_ECS_NUM_MEDIA_FRUS *
+ sizeof(CXLMemECSReadAttrs)) {
+ return CXL_MBOX_INVALID_INPUT;
+ }
+ bytes_to_copy = CXL_ECS_NUM_MEDIA_FRUS *
+ sizeof(CXLMemECSReadAttrs) -
+ get_feature->offset;
+ bytes_to_copy = MIN(bytes_to_copy, get_feature->count);
+ memcpy(payload_out,
+ (uint8_t *)&ct3d->ecs_attrs + get_feature->offset,
+ bytes_to_copy);
} else {
return CXL_MBOX_UNSUPPORTED;
}
@@ -1009,10 +1053,13 @@ static CXLRetCode cmd_features_set_feature(const struct
cxl_cmd *cmd,
CXLSetFeatureInHeader *hdr = (void *)payload_in;
CXLMemPatrolScrubWriteAttrs *ps_write_attrs;
CXLMemPatrolScrubSetFeature *ps_set_feature;
+ CXLMemECSWriteAttrs *ecs_write_attrs;
+ CXLMemECSSetFeature *ecs_set_feature;
CXLSetFeatureInfo *set_feat_info;
uint16_t bytes_to_copy = 0;
uint8_t data_transfer_flag;
CXLType3Dev *ct3d;
+ uint16_t count;
if (!object_dynamic_cast(OBJECT(cci->d), TYPE_CXL_TYPE3)) {
@@ -1062,6 +1109,28 @@ static CXLRetCode cmd_features_set_feature(const struct
cxl_cmd *cmd,
ct3d->patrol_scrub_attrs.scrub_flags |=
ct3d->patrol_scrub_wr_attrs.scrub_flags & 0x1;
}
+ } else if (qemu_uuid_is_equal(&hdr->uuid,
+ &ecs_uuid)) {
+ if (hdr->version != CXL_ECS_SET_FEATURE_VERSION) {
+ return CXL_MBOX_UNSUPPORTED;
+ }
+
+ ecs_set_feature = (void *)payload_in;
+ ecs_write_attrs = ecs_set_feature->feat_data;
+ memcpy((uint8_t *)ct3d->ecs_wr_attrs + hdr->offset,
+ ecs_write_attrs,
+ bytes_to_copy);
+ set_feat_info->data_size += bytes_to_copy;
+
+ if (data_transfer_flag == CXL_SET_FEATURE_FLAG_FULL_DATA_TRANSFER ||
+ data_transfer_flag == CXL_SET_FEATURE_FLAG_FINISH_DATA_TRANSFER) {
+ for (count = 0; count < CXL_ECS_NUM_MEDIA_FRUS; count++) {
+ ct3d->ecs_attrs[count].ecs_log_cap =
+ ct3d->ecs_wr_attrs[count].ecs_log_cap;
+ ct3d->ecs_attrs[count].ecs_config =
+ ct3d->ecs_wr_attrs[count].ecs_config & 0x1F;
+ }
+ }
} else {
return CXL_MBOX_UNSUPPORTED;
}
@@ -1072,6 +1141,8 @@ static CXLRetCode cmd_features_set_feature(const struct
cxl_cmd *cmd,
memset(&set_feat_info->uuid, 0, sizeof(QemuUUID));
if (qemu_uuid_is_equal(&hdr->uuid, &patrol_scrub_uuid)) {
memset(&ct3d->patrol_scrub_wr_attrs, 0, set_feat_info->data_size);
+ } else if (qemu_uuid_is_equal(&hdr->uuid, &ecs_uuid)) {
+ memset(ct3d->ecs_wr_attrs, 0, set_feat_info->data_size);
}
set_feat_info->data_transfer_flag = 0;
set_feat_info->data_saved_across_reset = false;
diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
index 7c583d80f5..d648192ab9 100644
--- a/hw/mem/cxl_type3.c
+++ b/hw/mem/cxl_type3.c
@@ -844,6 +844,7 @@ static void ct3_realize(PCIDevice *pci_dev, Error **errp)
uint8_t *pci_conf = pci_dev->config;
unsigned short msix_num = 6;
int i, rc;
+ uint16_t count;
QTAILQ_INIT(&ct3d->error_list);
@@ -917,6 +918,19 @@ static void ct3_realize(PCIDevice *pci_dev, Error **errp)
(CXL_MEMDEV_PS_MIN_SCRUB_CYCLE_DEFAULT << 8);
ct3d->patrol_scrub_attrs.scrub_flags = CXL_MEMDEV_PS_ENABLE_DEFAULT;
+ /* Set default value for DDR5 ECS read attributes */
+ for (count = 0; count < CXL_ECS_NUM_MEDIA_FRUS; count++) {
+ ct3d->ecs_attrs[count].ecs_log_cap =
+ CXL_ECS_LOG_ENTRY_TYPE_DEFAULT;
+ ct3d->ecs_attrs[count].ecs_cap =
+ CXL_ECS_REALTIME_REPORT_CAP_DEFAULT;
+ ct3d->ecs_attrs[count].ecs_config =
+ CXL_ECS_THRESHOLD_COUNT_DEFAULT |
+ (CXL_ECS_MODE_DEFAULT << 3);
+ /* Reserved */
+ ct3d->ecs_attrs[count].ecs_flags = 0;
+ }
+
return;
err_release_cdat:
--
MST
- [PULL v2 03/61] hw/cxl/cxl-mailbox-utils: remove unneeded mailbox output payload space zeroing, (continued)
- [PULL v2 03/61] hw/cxl/cxl-mailbox-utils: remove unneeded mailbox output payload space zeroing, Michael S. Tsirkin, 2024/07/23
- [PULL v2 05/61] hw/cxl/cxl-host: Fix segmentation fault when getting cxl-fmw property, Michael S. Tsirkin, 2024/07/23
- [PULL v2 06/61] hw/cxl: Add get scan media capabilities cmd support, Michael S. Tsirkin, 2024/07/23
- [PULL v2 07/61] hw/cxl/mbox: replace sanitize_running() with cxl_dev_media_disabled(), Michael S. Tsirkin, 2024/07/23
- [PULL v2 04/61] hw/cxl: Check for multiple mappings of memory backends., Michael S. Tsirkin, 2024/07/23
- [PULL v2 08/61] hw/cxl/events: discard all event records during sanitation, Michael S. Tsirkin, 2024/07/23
- [PULL v2 09/61] hw/cxl: Add get scan media results cmd support, Michael S. Tsirkin, 2024/07/23
- [PULL v2 10/61] cxl/mailbox: move mailbox effect definitions to a header, Michael S. Tsirkin, 2024/07/23
- [PULL v2 11/61] hw/cxl/cxl-mailbox-utils: Add support for feature commands (8.2.9.6), Michael S. Tsirkin, 2024/07/23
- [PULL v2 12/61] hw/cxl/cxl-mailbox-utils: Add device patrol scrub control feature, Michael S. Tsirkin, 2024/07/23
- [PULL v2 13/61] hw/cxl/cxl-mailbox-utils: Add device DDR5 ECS control feature,
Michael S. Tsirkin <=
- [PULL v2 14/61] hw/cxl: Support firmware updates, Michael S. Tsirkin, 2024/07/23
- [PULL v2 15/61] MAINTAINERS: Add myself as a VT-d reviewer, Michael S. Tsirkin, 2024/07/23
- [PULL v2 16/61] virtio-snd: add max size bounds check in input cb, Michael S. Tsirkin, 2024/07/23
- [PULL v2 17/61] virtio-snd: check for invalid param shift operands, Michael S. Tsirkin, 2024/07/23
- [PULL v2 18/61] intel_iommu: fix FRCD construction macro, Michael S. Tsirkin, 2024/07/23
- [PULL v2 19/61] intel_iommu: move VTD_FRCD_PV and VTD_FRCD_PP declarations, Michael S. Tsirkin, 2024/07/23
- [PULL v2 20/61] intel_iommu: fix type of the mask field in VTDIOTLBPageInvInfo, Michael S. Tsirkin, 2024/07/23
- [PULL v2 23/61] virtio: virtqueue_pop - VIRTIO_F_IN_ORDER support, Michael S. Tsirkin, 2024/07/23