[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL 43/47] hw/riscv: Respect firmware ELF entry point
|
From: |
Alistair Francis |
|
Subject: |
[PULL 43/47] hw/riscv: Respect firmware ELF entry point |
|
Date: |
Thu, 12 Sep 2024 15:29:48 +1000 |
From: Samuel Holland <samuel.holland@sifive.com>
When riscv_load_firmware() loads an ELF, the ELF segment addresses are
used, not the passed-in firmware_load_addr. The machine models assume
the firmware entry point is what they provided for firmware_load_addr,
and use that address to generate the boot ROM, so if the ELF is linked
at any other address, the boot ROM will jump to empty memory.
Pass back the ELF entry point to use when generating the boot ROM, so
the boot ROM can jump to firmware loaded anywhere in RAM. For example,
on the virt machine, this allows using an OpenSBI fw_dynamic.elf built
with FW_TEXT_START values other than 0x80000000.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240817002651.3209701-1-samuel.holland@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
include/hw/riscv/boot.h | 4 ++--
hw/riscv/boot.c | 11 ++++++-----
hw/riscv/microchip_pfsoc.c | 2 +-
hw/riscv/opentitan.c | 3 ++-
hw/riscv/shakti_c.c | 13 ++++++-------
hw/riscv/sifive_u.c | 4 ++--
hw/riscv/spike.c | 5 +++--
hw/riscv/virt.c | 4 ++--
8 files changed, 24 insertions(+), 22 deletions(-)
diff --git a/include/hw/riscv/boot.h b/include/hw/riscv/boot.h
index a2e4ae9cb0..18bfe9f7bf 100644
--- a/include/hw/riscv/boot.h
+++ b/include/hw/riscv/boot.h
@@ -35,13 +35,13 @@ target_ulong
riscv_calc_kernel_start_addr(RISCVHartArrayState *harts,
target_ulong firmware_end_addr);
target_ulong riscv_find_and_load_firmware(MachineState *machine,
const char *default_machine_firmware,
- hwaddr firmware_load_addr,
+ hwaddr *firmware_load_addr,
symbol_fn_t sym_cb);
const char *riscv_default_firmware_name(RISCVHartArrayState *harts);
char *riscv_find_firmware(const char *firmware_filename,
const char *default_machine_firmware);
target_ulong riscv_load_firmware(const char *firmware_filename,
- hwaddr firmware_load_addr,
+ hwaddr *firmware_load_addr,
symbol_fn_t sym_cb);
target_ulong riscv_load_kernel(MachineState *machine,
RISCVHartArrayState *harts,
diff --git a/hw/riscv/boot.c b/hw/riscv/boot.c
index 47281ca853..9115ecd91f 100644
--- a/hw/riscv/boot.c
+++ b/hw/riscv/boot.c
@@ -128,11 +128,11 @@ char *riscv_find_firmware(const char *firmware_filename,
target_ulong riscv_find_and_load_firmware(MachineState *machine,
const char *default_machine_firmware,
- hwaddr firmware_load_addr,
+ hwaddr *firmware_load_addr,
symbol_fn_t sym_cb)
{
char *firmware_filename;
- target_ulong firmware_end_addr = firmware_load_addr;
+ target_ulong firmware_end_addr = *firmware_load_addr;
firmware_filename = riscv_find_firmware(machine->firmware,
default_machine_firmware);
@@ -148,7 +148,7 @@ target_ulong riscv_find_and_load_firmware(MachineState
*machine,
}
target_ulong riscv_load_firmware(const char *firmware_filename,
- hwaddr firmware_load_addr,
+ hwaddr *firmware_load_addr,
symbol_fn_t sym_cb)
{
uint64_t firmware_entry, firmware_end;
@@ -159,15 +159,16 @@ target_ulong riscv_load_firmware(const char
*firmware_filename,
if (load_elf_ram_sym(firmware_filename, NULL, NULL, NULL,
&firmware_entry, NULL, &firmware_end, NULL,
0, EM_RISCV, 1, 0, NULL, true, sym_cb) > 0) {
+ *firmware_load_addr = firmware_entry;
return firmware_end;
}
firmware_size = load_image_targphys_as(firmware_filename,
- firmware_load_addr,
+ *firmware_load_addr,
current_machine->ram_size, NULL);
if (firmware_size > 0) {
- return firmware_load_addr + firmware_size;
+ return *firmware_load_addr + firmware_size;
}
error_report("could not load firmware '%s'", firmware_filename);
diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c
index 7725dfbde5..f9a3b43d2e 100644
--- a/hw/riscv/microchip_pfsoc.c
+++ b/hw/riscv/microchip_pfsoc.c
@@ -613,7 +613,7 @@ static void microchip_icicle_kit_machine_init(MachineState
*machine)
/* Load the firmware */
firmware_end_addr = riscv_find_and_load_firmware(machine, firmware_name,
- firmware_load_addr, NULL);
+ &firmware_load_addr,
NULL);
if (kernel_as_payload) {
kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc.u_cpus,
diff --git a/hw/riscv/opentitan.c b/hw/riscv/opentitan.c
index 436503f1ba..e2830e9dc2 100644
--- a/hw/riscv/opentitan.c
+++ b/hw/riscv/opentitan.c
@@ -98,7 +98,8 @@ static void opentitan_machine_init(MachineState *machine)
memmap[IBEX_DEV_RAM].base, machine->ram);
if (machine->firmware) {
- riscv_load_firmware(machine->firmware, memmap[IBEX_DEV_RAM].base,
NULL);
+ hwaddr firmware_load_addr = memmap[IBEX_DEV_RAM].base;
+ riscv_load_firmware(machine->firmware, &firmware_load_addr, NULL);
}
if (machine->kernel_filename) {
diff --git a/hw/riscv/shakti_c.c b/hw/riscv/shakti_c.c
index 3888034c2b..2dccc1eff2 100644
--- a/hw/riscv/shakti_c.c
+++ b/hw/riscv/shakti_c.c
@@ -45,6 +45,7 @@ static void shakti_c_machine_state_init(MachineState *mstate)
{
ShaktiCMachineState *sms = RISCV_SHAKTI_MACHINE(mstate);
MemoryRegion *system_memory = get_system_memory();
+ hwaddr firmware_load_addr = shakti_c_memmap[SHAKTI_C_RAM].base;
/* Initialize SoC */
object_initialize_child(OBJECT(mstate), "soc", &sms->soc,
@@ -56,16 +57,14 @@ static void shakti_c_machine_state_init(MachineState
*mstate)
shakti_c_memmap[SHAKTI_C_RAM].base,
mstate->ram);
+ if (mstate->firmware) {
+ riscv_load_firmware(mstate->firmware, &firmware_load_addr, NULL);
+ }
+
/* ROM reset vector */
- riscv_setup_rom_reset_vec(mstate, &sms->soc.cpus,
- shakti_c_memmap[SHAKTI_C_RAM].base,
+ riscv_setup_rom_reset_vec(mstate, &sms->soc.cpus, firmware_load_addr,
shakti_c_memmap[SHAKTI_C_ROM].base,
shakti_c_memmap[SHAKTI_C_ROM].size, 0, 0);
- if (mstate->firmware) {
- riscv_load_firmware(mstate->firmware,
- shakti_c_memmap[SHAKTI_C_RAM].base,
- NULL);
- }
}
static void shakti_c_machine_instance_init(Object *obj)
diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index af5f923f54..35a689309d 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -515,7 +515,7 @@ static void sifive_u_machine_init(MachineState *machine)
SiFiveUState *s = RISCV_U_MACHINE(machine);
MemoryRegion *system_memory = get_system_memory();
MemoryRegion *flash0 = g_new(MemoryRegion, 1);
- target_ulong start_addr = memmap[SIFIVE_U_DEV_DRAM].base;
+ hwaddr start_addr = memmap[SIFIVE_U_DEV_DRAM].base;
target_ulong firmware_end_addr, kernel_start_addr;
const char *firmware_name;
uint32_t start_addr_hi32 = 0x00000000;
@@ -589,7 +589,7 @@ static void sifive_u_machine_init(MachineState *machine)
firmware_name = riscv_default_firmware_name(&s->soc.u_cpus);
firmware_end_addr = riscv_find_and_load_firmware(machine, firmware_name,
- start_addr, NULL);
+ &start_addr, NULL);
if (machine->kernel_filename) {
kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc.u_cpus,
diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c
index 64074395bc..fceb91d946 100644
--- a/hw/riscv/spike.c
+++ b/hw/riscv/spike.c
@@ -198,6 +198,7 @@ static void spike_board_init(MachineState *machine)
MemoryRegion *system_memory = get_system_memory();
MemoryRegion *mask_rom = g_new(MemoryRegion, 1);
target_ulong firmware_end_addr = memmap[SPIKE_DRAM].base;
+ hwaddr firmware_load_addr = memmap[SPIKE_DRAM].base;
target_ulong kernel_start_addr;
char *firmware_name;
uint32_t fdt_load_addr;
@@ -290,7 +291,7 @@ static void spike_board_init(MachineState *machine)
/* Load firmware */
if (firmware_name) {
firmware_end_addr = riscv_load_firmware(firmware_name,
- memmap[SPIKE_DRAM].base,
+ &firmware_load_addr,
htif_symbol_callback);
g_free(firmware_name);
}
@@ -320,7 +321,7 @@ static void spike_board_init(MachineState *machine)
riscv_load_fdt(fdt_load_addr, machine->fdt);
/* load the reset vector */
- riscv_setup_rom_reset_vec(machine, &s->soc[0], memmap[SPIKE_DRAM].base,
+ riscv_setup_rom_reset_vec(machine, &s->soc[0], firmware_load_addr,
memmap[SPIKE_MROM].base,
memmap[SPIKE_MROM].size, kernel_entry,
fdt_load_addr);
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index 63d553ac98..1d32b4b0f3 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -1360,7 +1360,7 @@ static void virt_machine_done(Notifier *notifier, void
*data)
machine_done);
const MemMapEntry *memmap = virt_memmap;
MachineState *machine = MACHINE(s);
- target_ulong start_addr = memmap[VIRT_DRAM].base;
+ hwaddr start_addr = memmap[VIRT_DRAM].base;
target_ulong firmware_end_addr, kernel_start_addr;
const char *firmware_name = riscv_default_firmware_name(&s->soc[0]);
uint64_t fdt_load_addr;
@@ -1392,7 +1392,7 @@ static void virt_machine_done(Notifier *notifier, void
*data)
}
firmware_end_addr = riscv_find_and_load_firmware(machine, firmware_name,
- start_addr, NULL);
+ &start_addr, NULL);
pflash_blk0 = pflash_cfi01_get_blk(s->flash[0]);
if (pflash_blk0) {
--
2.46.0
- [PULL 24/47] qtest/riscv-iommu-test: add init queues test, (continued)
- [PULL 24/47] qtest/riscv-iommu-test: add init queues test, Alistair Francis, 2024/09/12
- [PULL 31/47] bsd-user: Define RISC-V register structures and register copying, Alistair Francis, 2024/09/12
- [PULL 33/47] bsd-user: Implement RISC-V sysarch system call emulation, Alistair Francis, 2024/09/12
- [PULL 36/47] bsd-user: Define RISC-V system call structures and constants, Alistair Francis, 2024/09/12
- [PULL 38/47] bsd-user: Define RISC-V signal handling structures and constants, Alistair Francis, 2024/09/12
- [PULL 32/47] bsd-user: Add RISC-V signal trampoline setup function, Alistair Francis, 2024/09/12
- [PULL 34/47] bsd-user: Add RISC-V thread setup and initialization support, Alistair Francis, 2024/09/12
- [PULL 46/47] target/riscv/cpu_helper: Fix linking problem with semihosting disabled, Alistair Francis, 2024/09/12
- [PULL 43/47] hw/riscv: Respect firmware ELF entry point,
Alistair Francis <=
- [PULL 39/47] bsd-user: Implement RISC-V signal trampoline setup functions, Alistair Francis, 2024/09/12
- [PULL 37/47] bsd-user: Add generic RISC-V64 target definitions, Alistair Francis, 2024/09/12
- [PULL 40/47] bsd-user: Implement 'get_mcontext' for RISC-V, Alistair Francis, 2024/09/12
- [PULL 45/47] target/riscv32: Fix masking of physical address, Alistair Francis, 2024/09/12
- [PULL 47/47] hw/intc: riscv-imsic: Fix interrupt state updates., Alistair Francis, 2024/09/12
- [PULL 42/47] bsd-user: Add RISC-V 64-bit Target Configuration and Debug XML Files, Alistair Francis, 2024/09/12
- [PULL 41/47] bsd-user: Implement set_mcontext and get_ucontext_sigreturn for RISCV, Alistair Francis, 2024/09/12
- [PULL 44/47] target: riscv: Add Svvptc extension support, Alistair Francis, 2024/09/12
- Re: [PULL 00/47] riscv-to-apply queue, Peter Maydell, 2024/09/13