[PULL 03/39] hw/riscv/riscv-iommu.c: add riscv_iommu_instance_init()

[Alistair Francis]

From: Daniel Henrique Barboza <dbarboza@ventanamicro.com>

Move all the static initializion of the device to an init() function,
leaving only the dynamic initialization to be done during realize.

With this change s->cap is initialized with RISCV_IOMMU_CAP_DBG during
init(), and realize() will increment s->cap with the extra caps.

This will allow callers to add IOMMU capabilities before the
realization.

Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241106133407.604587-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
 hw/riscv/riscv-iommu.c | 71 +++++++++++++++++++++++-------------------
 1 file changed, 39 insertions(+), 32 deletions(-)

diff --git a/hw/riscv/riscv-iommu.c b/hw/riscv/riscv-iommu.c
index b6b9477129..c461ebbd87 100644
--- a/hw/riscv/riscv-iommu.c
+++ b/hw/riscv/riscv-iommu.c
@@ -2130,11 +2130,48 @@ static const MemoryRegionOps riscv_iommu_trap_ops = {
     }
 };
 
+static void riscv_iommu_instance_init(Object *obj)
+{
+    RISCVIOMMUState *s = RISCV_IOMMU(obj);
+
+    /* Enable translation debug interface */
+    s->cap = RISCV_IOMMU_CAP_DBG;
+
+    /* Report QEMU target physical address space limits */
+    s->cap = set_field(s->cap, RISCV_IOMMU_CAP_PAS,
+                       TARGET_PHYS_ADDR_SPACE_BITS);
+
+    /* TODO: method to report supported PID bits */
+    s->pid_bits = 8; /* restricted to size of MemTxAttrs.pid */
+    s->cap |= RISCV_IOMMU_CAP_PD8;
+
+    /* register storage */
+    s->regs_rw = g_new0(uint8_t, RISCV_IOMMU_REG_SIZE);
+    s->regs_ro = g_new0(uint8_t, RISCV_IOMMU_REG_SIZE);
+    s->regs_wc = g_new0(uint8_t, RISCV_IOMMU_REG_SIZE);
+
+     /* Mark all registers read-only */
+    memset(s->regs_ro, 0xff, RISCV_IOMMU_REG_SIZE);
+
+    /* Device translation context cache */
+    s->ctx_cache = g_hash_table_new_full(riscv_iommu_ctx_hash,
+                                         riscv_iommu_ctx_equal,
+                                         g_free, NULL);
+
+    s->iot_cache = g_hash_table_new_full(riscv_iommu_iot_hash,
+                                         riscv_iommu_iot_equal,
+                                         g_free, NULL);
+
+    s->iommus.le_next = NULL;
+    s->iommus.le_prev = NULL;
+    QLIST_INIT(&s->spaces);
+}
+
 static void riscv_iommu_realize(DeviceState *dev, Error **errp)
 {
     RISCVIOMMUState *s = RISCV_IOMMU(dev);
 
-    s->cap = s->version & RISCV_IOMMU_CAP_VERSION;
+    s->cap |= s->version & RISCV_IOMMU_CAP_VERSION;
     if (s->enable_msi) {
         s->cap |= RISCV_IOMMU_CAP_MSI_FLAT | RISCV_IOMMU_CAP_MSI_MRIF;
     }
@@ -2149,29 +2186,11 @@ static void riscv_iommu_realize(DeviceState *dev, Error 
**errp)
         s->cap |= RISCV_IOMMU_CAP_SV32X4 | RISCV_IOMMU_CAP_SV39X4 |
                   RISCV_IOMMU_CAP_SV48X4 | RISCV_IOMMU_CAP_SV57X4;
     }
-    /* Enable translation debug interface */
-    s->cap |= RISCV_IOMMU_CAP_DBG;
-
-    /* Report QEMU target physical address space limits */
-    s->cap = set_field(s->cap, RISCV_IOMMU_CAP_PAS,
-                       TARGET_PHYS_ADDR_SPACE_BITS);
-
-    /* TODO: method to report supported PID bits */
-    s->pid_bits = 8; /* restricted to size of MemTxAttrs.pid */
-    s->cap |= RISCV_IOMMU_CAP_PD8;
 
     /* Out-of-reset translation mode: OFF (DMA disabled) BARE (passthrough) */
     s->ddtp = set_field(0, RISCV_IOMMU_DDTP_MODE, s->enable_off ?
                         RISCV_IOMMU_DDTP_MODE_OFF : 
RISCV_IOMMU_DDTP_MODE_BARE);
 
-    /* register storage */
-    s->regs_rw = g_new0(uint8_t, RISCV_IOMMU_REG_SIZE);
-    s->regs_ro = g_new0(uint8_t, RISCV_IOMMU_REG_SIZE);
-    s->regs_wc = g_new0(uint8_t, RISCV_IOMMU_REG_SIZE);
-
-     /* Mark all registers read-only */
-    memset(s->regs_ro, 0xff, RISCV_IOMMU_REG_SIZE);
-
     /*
      * Register complete MMIO space, including MSI/PBA registers.
      * Note, PCIDevice implementation will add overlapping MR for MSI/PBA,
@@ -2229,19 +2248,6 @@ static void riscv_iommu_realize(DeviceState *dev, Error 
**errp)
     memory_region_init_io(&s->trap_mr, OBJECT(dev), &riscv_iommu_trap_ops, s,
             "riscv-iommu-trap", ~0ULL);
     address_space_init(&s->trap_as, &s->trap_mr, "riscv-iommu-trap-as");
-
-    /* Device translation context cache */
-    s->ctx_cache = g_hash_table_new_full(riscv_iommu_ctx_hash,
-                                         riscv_iommu_ctx_equal,
-                                         g_free, NULL);
-
-    s->iot_cache = g_hash_table_new_full(riscv_iommu_iot_hash,
-                                         riscv_iommu_iot_equal,
-                                         g_free, NULL);
-
-    s->iommus.le_next = NULL;
-    s->iommus.le_prev = NULL;
-    QLIST_INIT(&s->spaces);
 }
 
 static void riscv_iommu_unrealize(DeviceState *dev)
@@ -2283,6 +2289,7 @@ static const TypeInfo riscv_iommu_info = {
     .name = TYPE_RISCV_IOMMU,
     .parent = TYPE_DEVICE,
     .instance_size = sizeof(RISCVIOMMUState),
+    .instance_init = riscv_iommu_instance_init,
     .class_init = riscv_iommu_class_init,
 };
 
-- 
2.47.1