[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-ppc] [Qemu-devel][PATCH v7 1/3] Add USB option in machine opti
From: |
Li Zhang |
Subject: |
Re: [Qemu-ppc] [Qemu-devel][PATCH v7 1/3] Add USB option in machine options |
Date: |
Tue, 14 Aug 2012 22:59:59 +0800 |
On Tue, Aug 14, 2012 at 6:39 PM, Alexander Graf <address@hidden> wrote:
> On 08/07/2012 04:41 AM, Li Zhang wrote:
>>
>> When -usb option is used, global varible usb_enabled is set.
>> And all the plafrom will create one USB controller according
>> to this variable. In fact, global varibles make code hard
>> to read.
>>
>> So this patch is to remove global variable usb_enabled and
>> add USB option in machine options. All the plaforms will get
>> USB option value from machine options.
>>
>> USB option of machine options will be set either by:
>> * -usb
>> * -machine type=pseries,usb=on
>>
>> Both these ways can work now. They both set USB option in
>> machine options. In the future, the first way will be removed.
>>
>> Signed-off-by: Li Zhang <address@hidden>
>> ---
>> hw/nseries.c | 9 +++++++++
>> hw/pc_piix.c | 6 ++++++
>> hw/ppc_newworld.c | 10 +++++++++-
>> hw/ppc_oldworld.c | 8 ++++++++
>> hw/ppc_prep.c | 7 +++++++
>> hw/pxa2xx.c | 15 +++++++++++++++
>> hw/realview.c | 8 ++++++++
>> hw/spapr.c | 12 ++++++++++++
>> hw/versatilepb.c | 8 ++++++++
>> qemu-config.c | 4 ++++
>> sysemu.h | 1 -
>> vl.c | 29 +++++++++++++++++++++++------
>> 12 files changed, 109 insertions(+), 8 deletions(-)
>>
>> diff --git a/hw/nseries.c b/hw/nseries.c
>> index 4df2670..8e385b7 100644
>> --- a/hw/nseries.c
>> +++ b/hw/nseries.c
>> @@ -1282,6 +1282,9 @@ static void n8x0_init(ram_addr_t ram_size, const
>> char *boot_device,
>> int sdram_size = binfo->ram_size;
>> DisplayState *ds;
>> + QemuOpts *mach_opts;
>> + bool usb_enabled = false;
>> +
>> s->mpu = omap2420_mpu_init(sysmem, sdram_size, cpu_model);
>> /* Setup peripherals
>> @@ -1322,6 +1325,12 @@ static void n8x0_init(ram_addr_t ram_size, const
>> char *boot_device,
>> n8x0_dss_setup(s);
>> n8x0_cbus_setup(s);
>> n8x0_uart_setup(s);
>> +
>> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
>> + if (mach_opts) {
>> + usb_enabled = qemu_opt_get_bool(mach_opts, "usb", false);
>> + }
>> +
>> if (usb_enabled)
>> n8x0_usb_setup(s);
>> diff --git a/hw/pc_piix.c b/hw/pc_piix.c
>> index 0c0096f..0bf25d0 100644
>> --- a/hw/pc_piix.c
>> +++ b/hw/pc_piix.c
>> @@ -148,6 +148,8 @@ static void pc_init1(MemoryRegion *system_memory,
>> MemoryRegion *pci_memory;
>> MemoryRegion *rom_memory;
>> void *fw_cfg = NULL;
>> + QemuOpts *mach_opts;
>> + bool usb_enabled = false;
>> pc_cpus_init(cpu_model);
>> @@ -267,6 +269,10 @@ static void pc_init1(MemoryRegion *system_memory,
>> pc_cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device,
>> floppy, idebus[0], idebus[1], rtc_state);
>> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
>> + if (mach_opts) {
>> + usb_enabled = qemu_opt_get_bool(mach_opts, "usb", false);
>> + }
>> if (pci_enabled && usb_enabled) {
>> pci_create_simple(pci_bus, piix3_devfn + 2, "piix3-usb-uhci");
>> }
>> diff --git a/hw/ppc_newworld.c b/hw/ppc_newworld.c
>> index 4e2a6e6..1a324eb 100644
>> --- a/hw/ppc_newworld.c
>> +++ b/hw/ppc_newworld.c
>> @@ -159,6 +159,9 @@ static void ppc_core99_init (ram_addr_t ram_size,
>> linux_boot = (kernel_filename != NULL);
>> + QemuOpts *mach_opts;
>> + bool usb_enabled = false;
>> +
>> /* init CPUs */
>> if (cpu_model == NULL)
>> #ifdef TARGET_PPC64
>> @@ -350,7 +353,7 @@ static void ppc_core99_init (ram_addr_t ram_size,
>> /* cuda also initialize ADB */
>> if (machine_arch == ARCH_MAC99_U3) {
>> - usb_enabled = 1;
>> + usb_enabled = true;
>> }
>> cuda_init(&cuda_mem, pic[0x19]);
>> @@ -360,6 +363,11 @@ static void ppc_core99_init (ram_addr_t ram_size,
>> macio_init(pci_bus, PCI_DEVICE_ID_APPLE_UNI_N_KEYL, 0, pic_mem,
>> dbdma_mem, cuda_mem, NULL, 3, ide_mem, escc_bar);
>> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
>> + if (mach_opts) {
>> + usb_enabled = qemu_opt_get_bool(mach_opts, "usb", true);
>> + }
>> +
>> if (usb_enabled) {
>> pci_create_simple(pci_bus, -1, "pci-ohci");
>> }
>> diff --git a/hw/ppc_oldworld.c b/hw/ppc_oldworld.c
>> index f2c6908..da05705 100644
>> --- a/hw/ppc_oldworld.c
>> +++ b/hw/ppc_oldworld.c
>> @@ -101,6 +101,9 @@ static void ppc_heathrow_init (ram_addr_t ram_size,
>> linux_boot = (kernel_filename != NULL);
>> + QemuOpts *mach_opts;
>> + bool usb_enabled = true;
>> +
>> /* init CPUs */
>> if (cpu_model == NULL)
>> cpu_model = "G3";
>> @@ -286,6 +289,11 @@ static void ppc_heathrow_init (ram_addr_t ram_size,
>> macio_init(pci_bus, PCI_DEVICE_ID_APPLE_343S1201, 1, pic_mem,
>> dbdma_mem, cuda_mem, nvr, 2, ide_mem, escc_bar);
>> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
>> + if (mach_opts) {
>> + usb_enabled = qemu_opt_get_bool(mach_opts, "usb", true);
>> + }
>> +
>> if (usb_enabled) {
>> pci_create_simple(pci_bus, -1, "pci-ohci");
>> }
>> diff --git a/hw/ppc_prep.c b/hw/ppc_prep.c
>> index be2b268..dc294ae 100644
>> --- a/hw/ppc_prep.c
>> +++ b/hw/ppc_prep.c
>> @@ -484,6 +484,9 @@ static void ppc_prep_init (ram_addr_t ram_size,
>> linux_boot = (kernel_filename != NULL);
>> + QemuOpts *mach_opts;
>> + bool usb_enabled = true;
>> +
>> /* init CPUs */
>> if (cpu_model == NULL)
>> cpu_model = "602";
>> @@ -661,6 +664,10 @@ static void ppc_prep_init (ram_addr_t ram_size,
>> memory_region_add_subregion(sysmem, 0xFEFF0000, xcsr);
>> #endif
>> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
>> + if (mach_opts) {
>> + usb_enabled = qemu_opt_get_bool(mach_opts, "usb", true);
>> + }
>> if (usb_enabled) {
>> pci_create_simple(pci_bus, -1, "pci-ohci");
>> }
>> diff --git a/hw/pxa2xx.c b/hw/pxa2xx.c
>> index d5f1420..ed87797 100644
>> --- a/hw/pxa2xx.c
>> +++ b/hw/pxa2xx.c
>> @@ -2007,6 +2007,9 @@ PXA2xxState *pxa270_init(MemoryRegion
>> *address_space,
>> PXA2xxState *s;
>> int i;
>> DriveInfo *dinfo;
>> + QemuOpts *mach_opts;
>> + bool usb_enabled = false;
>> +
>> s = (PXA2xxState *) g_malloc0(sizeof(PXA2xxState));
>> if (revision && strncmp(revision, "pxa27", 5)) {
>> @@ -2108,6 +2111,11 @@ PXA2xxState *pxa270_init(MemoryRegion
>> *address_space,
>> s->ssp[i] = (SSIBus *)qdev_get_child_bus(dev, "ssi");
>> }
>> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
>> + if (mach_opts) {
>> + usb_enabled = qemu_opt_get_bool(mach_opts, "usb", false);
>> + }
>> +
>> if (usb_enabled) {
>> sysbus_create_simple("sysbus-ohci", 0x4c000000,
>> qdev_get_gpio_in(s->pic, PXA2XX_PIC_USBH1));
>> @@ -2144,6 +2152,8 @@ PXA2xxState *pxa255_init(MemoryRegion
>> *address_space, unsigned int sdram_size)
>> PXA2xxState *s;
>> int i;
>> DriveInfo *dinfo;
>> + QemuOpts *mach_opts;
>> + bool usb_enabled = false;
>> s = (PXA2xxState *) g_malloc0(sizeof(PXA2xxState));
>> @@ -2239,6 +2249,11 @@ PXA2xxState *pxa255_init(MemoryRegion
>> *address_space, unsigned int sdram_size)
>> s->ssp[i] = (SSIBus *)qdev_get_child_bus(dev, "ssi");
>> }
>> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
>> + if (mach_opts) {
>> + usb_enabled = qemu_opt_get_bool(mach_opts, "usb", false);
>> + }
>> +
>> if (usb_enabled) {
>> sysbus_create_simple("sysbus-ohci", 0x4c000000,
>> qdev_get_gpio_in(s->pic, PXA2XX_PIC_USBH1));
>> diff --git a/hw/realview.c b/hw/realview.c
>> index 19db4d0..543d5dc 100644
>> --- a/hw/realview.c
>> +++ b/hw/realview.c
>> @@ -73,6 +73,8 @@ static void realview_init(ram_addr_t ram_size,
>> uint32_t proc_id = 0;
>> uint32_t sys_id;
>> ram_addr_t low_ram_size;
>> + QemuOpts *mach_opts;
>> + bool usb_enabled = true;
>> switch (board_type) {
>> case BOARD_EB:
>> @@ -227,6 +229,12 @@ static void realview_init(ram_addr_t ram_size,
>> sysbus_connect_irq(busdev, 2, pic[50]);
>> sysbus_connect_irq(busdev, 3, pic[51]);
>> pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
>> +
>> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
>> + if (mach_opts) {
>> + usb_enabled = qemu_opt_get_bool(mach_opts, "usb", true);
>> + }
>> +
>> if (usb_enabled) {
>> pci_create_simple(pci_bus, -1, "pci-ohci");
>> }
>> diff --git a/hw/spapr.c b/hw/spapr.c
>> index 81c9343..4dc5e59 100644
>> --- a/hw/spapr.c
>> +++ b/hw/spapr.c
>> @@ -575,6 +575,8 @@ static void ppc_spapr_init(ram_addr_t ram_size,
>> long load_limit, rtas_limit, fw_size;
>> long pteg_shift = 17;
>> char *filename;
>> + QemuOpts *mach_opts;
>> + bool usb_enabled = true;
>> spapr = g_malloc0(sizeof(*spapr));
>> QLIST_INIT(&spapr->phbs);
>> @@ -710,6 +712,16 @@ static void ppc_spapr_init(ram_addr_t ram_size,
>> spapr_vscsi_create(spapr->vio_bus);
>> }
>> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
>> + if (mach_opts) {
>> + usb_enabled = qemu_opt_get_bool(mach_opts, "usb", true);
>> + }
>> +
>> + if (usb_enabled) {
>> + pci_create_simple(QLIST_FIRST(&spapr->phbs)->host_state.bus,
>> + -1, "pci-ohci");
>> + }
>> +
>> if (rma_size < (MIN_RMA_SLOF << 20)) {
>> fprintf(stderr, "qemu: pSeries SLOF firmware requires >= "
>> "%ldM guest RMA (Real Mode Area memory)\n",
>> MIN_RMA_SLOF);
>> diff --git a/hw/versatilepb.c b/hw/versatilepb.c
>> index 4fd5d9b..4b2f70d 100644
>> --- a/hw/versatilepb.c
>> +++ b/hw/versatilepb.c
>> @@ -188,6 +188,8 @@ static void versatile_init(ram_addr_t ram_size,
>> int n;
>> int done_smc = 0;
>> DriveInfo *dinfo;
>> + QemuOpts *mach_opts;
>> + bool usb_enabled = false;
>> if (!cpu_model) {
>> cpu_model = "arm926";
>> @@ -247,6 +249,12 @@ static void versatile_init(ram_addr_t ram_size,
>> pci_nic_init_nofail(nd, "rtl8139", NULL);
>> }
>> }
>> +
>> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
>> + if (mach_opts) {
>> + usb_enabled = qemu_opt_get_bool(mach_opts, "usb", false);
>> + }
>> +
>> if (usb_enabled) {
>> pci_create_simple(pci_bus, -1, "pci-ohci");
>> }
>> diff --git a/qemu-config.c b/qemu-config.c
>> index 5c3296b..b86ee36 100644
>> --- a/qemu-config.c
>> +++ b/qemu-config.c
>> @@ -595,6 +595,10 @@ static QemuOptsList qemu_machine_opts = {
>> .name = "dt_compatible",
>> .type = QEMU_OPT_STRING,
>> .help = "Overrides the \"compatible\" property of the dt
>> root node",
>> + },{
>> + .name = "usb",
>> + .type = QEMU_OPT_BOOL,
>> + .help = "Set on/off to enable/disable usb",
>> },
>> { /* End of list */ }
>> },
>> diff --git a/sysemu.h b/sysemu.h
>> index 4669348..7fbf8f4 100644
>> --- a/sysemu.h
>> +++ b/sysemu.h
>> @@ -118,7 +118,6 @@ extern const char *keyboard_layout;
>> extern int win2k_install_hack;
>> extern int alt_grab;
>> extern int ctrl_grab;
>> -extern int usb_enabled;
>> extern int smp_cpus;
>> extern int max_cpus;
>> extern int cursor_hide;
>> diff --git a/vl.c b/vl.c
>> index e71cb30..77e8962 100644
>> --- a/vl.c
>> +++ b/vl.c
>> @@ -198,7 +198,6 @@ CharDriverState *serial_hds[MAX_SERIAL_PORTS];
>> CharDriverState *parallel_hds[MAX_PARALLEL_PORTS];
>> CharDriverState *virtcon_hds[MAX_VIRTIO_CONSOLES];
>> int win2k_install_hack = 0;
>> -int usb_enabled = 0;
>> int singlestep = 0;
>> int smp_cpus = 1;
>> int max_cpus = 0;
>> @@ -1043,13 +1042,24 @@ static void smp_parse(const char *optarg)
>> /***********************************************************/
>> /* USB devices */
>> +static inline bool usb_enabled(bool default_usb)
>> +{
>> + QemuOpts *mach_opts;
>> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
>> + if (mach_opts) {
>> + return qemu_opt_get_bool(mach_opts, "usb", default_usb);
>> + }
>> + return default_usb;
>> +}
>
>
> If you move this function to sysemu.h and simply do a global
> s/usb_enabled/usb_enabled(false)/ the patch will be a lot smaller and we
> will have a lot less duplicated code.
>
OK, will do that. :)
>
> Alex
>
--
Best Regards
-Li
Re: [Qemu-ppc] [Qemu-devel][PATCH v7 1/3] Add USB option in machine options, Alexander Graf, 2012/08/14
- Re: [Qemu-ppc] [Qemu-devel][PATCH v7 1/3] Add USB option in machine options,
Li Zhang <=
Re: [Qemu-ppc] [Qemu-devel][PATCH v7 1/3] Add USB option in machine options, Alexander Graf, 2012/08/14
- Re: [Qemu-ppc] [Qemu-devel][PATCH v7 1/3] Add USB option in machine options, Li Zhang, 2012/08/14
- Re: [Qemu-ppc] [Qemu-devel][PATCH v7 1/3] Add USB option in machine options, David Gibson, 2012/08/14
- Re: [Qemu-ppc] [Qemu-devel][PATCH v7 1/3] Add USB option in machine options, Alexander Graf, 2012/08/14
- Re: [Qemu-ppc] [Qemu-devel][PATCH v7 1/3] Add USB option in machine options, Benjamin Herrenschmidt, 2012/08/14
- Re: [Qemu-ppc] [Qemu-devel][PATCH v7 1/3] Add USB option in machine options, Li Zhang, 2012/08/14
- Re: [Qemu-ppc] [Qemu-devel][PATCH v7 1/3] Add USB option in machine options, David Gibson, 2012/08/14
- Re: [Qemu-ppc] [Qemu-devel][PATCH v7 1/3] Add USB option in machine options, Li Zhang, 2012/08/14
- Re: [Qemu-ppc] [Qemu-devel][PATCH v7 1/3] Add USB option in machine options, David Gibson, 2012/08/14
- Re: [Qemu-ppc] [Qemu-devel][PATCH v7 1/3] Add USB option in machine options, Li Zhang, 2012/08/15