[Qemu-ppc] [PATCH 05/15] PPC: Mac: Add debug prints in macio and dbdma code

[Alexander Graf]

The macio code is basically undebuggable as it stands today, with no
debug prints anywhere whatsoever. DBDMA was better, but I needed a
few more to create reasonable logs that tell me where breakage is.

Add a DPRINTF macro in the macio source file and add a bunch of debug
prints that are all disabled by default of course.

Signed-off-by: Alexander Graf <address@hidden>
---
 hw/ide/macio.c            | 39 ++++++++++++++++++++++++++++++++++++++-
 hw/misc/macio/mac_dbdma.c | 12 ++++++++++--
 2 files changed, 48 insertions(+), 3 deletions(-)

diff --git a/hw/ide/macio.c b/hw/ide/macio.c
index 82409dc..5cbc923 100644
--- a/hw/ide/macio.c
+++ b/hw/ide/macio.c
@@ -30,6 +30,17 @@
 
 #include <hw/ide/internal.h>
 
+/* debug MACIO */
+// #define DEBUG_MACIO
+
+#ifdef DEBUG_MACIO
+#define MACIO_DPRINTF(fmt, ...)                                 \
+    do { printf("MACIO: %s: " fmt , __func__, ## __VA_ARGS__); } while (0)
+#else
+#define MACIO_DPRINTF(fmt, ...)
+#endif
+
+
 /***********************************************************/
 /* MacIO based PowerPC IDE */
 
@@ -48,6 +59,8 @@ static void pmac_ide_atapi_transfer_cb(void *opaque, int ret)
         goto done;
     }
 
+    MACIO_DPRINTF("io_buffer_size = %#x\n", s->io_buffer_size);
+
     if (s->io_buffer_size > 0) {
         m->aiocb = NULL;
         qemu_sglist_destroy(&s->sg);
@@ -59,15 +72,22 @@ static void pmac_ide_atapi_transfer_cb(void *opaque, int 
ret)
         s->io_buffer_index &= 0x7ff;
     }
 
-    if (s->packet_transfer_size <= 0)
+    /* end of transfer ? */
+    if (s->packet_transfer_size <= 0) {
+        MACIO_DPRINTF("end of transfer\n");
         ide_atapi_cmd_ok(s);
+    }
 
+    /* end of DMA ? */
     if (io->len == 0) {
+        MACIO_DPRINTF("end of DMA\n");
         goto done;
     }
 
     /* launch next transfer */
 
+    MACIO_DPRINTF("io->len = %#x\n", io->len);
+
     s->io_buffer_size = io->len;
 
     qemu_sglist_init(&s->sg, io->len / MACIO_PAGE_SIZE + 1,
@@ -76,12 +96,17 @@ static void pmac_ide_atapi_transfer_cb(void *opaque, int 
ret)
     io->addr += io->len;
     io->len = 0;
 
+    MACIO_DPRINTF("sector_num=%d size=%d, cmd_cmd=%d\n",
+                  (s->lba << 2) + (s->io_buffer_index >> 9),
+                  s->packet_transfer_size, s->dma_cmd);
+
     m->aiocb = dma_bdrv_read(s->bs, &s->sg,
                              (int64_t)(s->lba << 2) + (s->io_buffer_index >> 
9),
                              pmac_ide_atapi_transfer_cb, io);
     return;
 
 done:
+    MACIO_DPRINTF("done DMA\n");
     bdrv_acct_done(s->bs, &s->acct);
     io->dma_end(opaque);
 }
@@ -95,6 +120,7 @@ static void pmac_ide_transfer_cb(void *opaque, int ret)
     int64_t sector_num;
 
     if (ret < 0) {
+        MACIO_DPRINTF("DMA error\n");
         m->aiocb = NULL;
         qemu_sglist_destroy(&s->sg);
         ide_dma_error(s);
@@ -102,6 +128,7 @@ static void pmac_ide_transfer_cb(void *opaque, int ret)
     }
 
     sector_num = ide_get_sector(s);
+    MACIO_DPRINTF("io_buffer_size = %#x\n", s->io_buffer_size);
     if (s->io_buffer_size > 0) {
         m->aiocb = NULL;
         qemu_sglist_destroy(&s->sg);
@@ -113,12 +140,14 @@ static void pmac_ide_transfer_cb(void *opaque, int ret)
 
     /* end of transfer ? */
     if (s->nsector == 0) {
+        MACIO_DPRINTF("end of transfer\n");
         s->status = READY_STAT | SEEK_STAT;
         ide_set_irq(s->bus);
     }
 
     /* end of DMA ? */
     if (io->len == 0) {
+        MACIO_DPRINTF("end of DMA\n");
         goto done;
     }
 
@@ -127,12 +156,18 @@ static void pmac_ide_transfer_cb(void *opaque, int ret)
     s->io_buffer_index = 0;
     s->io_buffer_size = io->len;
 
+
+    MACIO_DPRINTF("io->len = %#x\n", io->len);
+
     qemu_sglist_init(&s->sg, io->len / MACIO_PAGE_SIZE + 1,
                      &address_space_memory);
     qemu_sglist_add(&s->sg, io->addr, io->len);
     io->addr += io->len;
     io->len = 0;
 
+    MACIO_DPRINTF("sector_num=%" PRId64 " n=%d, nsector=%d, cmd_cmd=%d\n",
+                  sector_num, n, s->nsector, s->dma_cmd);
+
     switch (s->dma_cmd) {
     case IDE_DMA_READ:
         m->aiocb = dma_bdrv_read(s->bs, &s->sg, sector_num,
@@ -162,6 +197,8 @@ static void pmac_ide_transfer(DBDMA_io *io)
     MACIOIDEState *m = io->opaque;
     IDEState *s = idebus_active_if(&m->bus);
 
+    MACIO_DPRINTF("\n", __LINE__);
+
     s->io_buffer_size = 0;
     if (s->drive_kind == IDE_CD) {
         bdrv_acct_start(s->bs, &s->acct, io->len, BDRV_ACCT_READ);
diff --git a/hw/misc/macio/mac_dbdma.c b/hw/misc/macio/mac_dbdma.c
index ab174f5..903604d 100644
--- a/hw/misc/macio/mac_dbdma.c
+++ b/hw/misc/macio/mac_dbdma.c
@@ -233,6 +233,7 @@ static void conditional_interrupt(DBDMA_channel *ch)
         return;
     case INTR_ALWAYS: /* always interrupt */
         qemu_irq_raise(ch->irq);
+        DBDMA_DPRINTF("conditional_interrupt: raise\n");
         return;
     }
 
@@ -245,12 +246,16 @@ static void conditional_interrupt(DBDMA_channel *ch)
 
     switch(intr) {
     case INTR_IFSET:  /* intr if condition bit is 1 */
-        if (cond)
+        if (cond) {
             qemu_irq_raise(ch->irq);
+            DBDMA_DPRINTF("conditional_interrupt: raise\n");
+        }
         return;
     case INTR_IFCLR:  /* intr if condition bit is 0 */
-        if (!cond)
+        if (!cond) {
             qemu_irq_raise(ch->irq);
+            DBDMA_DPRINTF("conditional_interrupt: raise\n");
+        }
         return;
     }
 }
@@ -368,6 +373,8 @@ static void dbdma_end(DBDMA_io *io)
     DBDMA_channel *ch = io->channel;
     dbdma_cmd *current = &ch->current;
 
+    DBDMA_DPRINTF("%s\n", __func__, __LINE__);
+
     if (conditional_wait(ch))
         goto wait;
 
@@ -422,6 +429,7 @@ static void start_input(DBDMA_channel *ch, int key, 
uint32_t addr,
      * are not implemented in the mac-io chip
      */
 
+    DBDMA_DPRINTF("addr 0x%x key 0x%x\n", addr, key);
     if (!addr || key > KEY_STREAM3) {
         kill_channel(ch);
         return;
-- 
1.8.1.4