[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-ppc] [PATCH v7 2/4] vfio: Add vfio_container_spapr_get_info()
From: |
Gavin Shan |
Subject: |
Re: [Qemu-ppc] [PATCH v7 2/4] vfio: Add vfio_container_spapr_get_info() |
Date: |
Fri, 6 Jun 2014 11:32:08 +1000 |
User-agent: |
Mutt/1.5.21 (2010-09-15) |
On Fri, Jun 06, 2014 at 09:40:56AM +1000, Alexey Kardashevskiy wrote:
>On 06/06/2014 05:27 AM, Alex Williamson wrote:
>> On Thu, 2014-06-05 at 15:49 +1000, Alexey Kardashevskiy wrote:
>>> To perform DMA mapping via TCE table correctly, the guest must
>>> know where DMA window is located on the PCI bus. A hypervisor is
>>> expected to provide such information. Since QEMU has no control
>>> over this setting, we need a way to obtain a start address and size
>>> from the host VFIO driver.
>>>
>>> This adds a helper which returns the default DMA window properties
>>> for the specific IOMMU group. The upstream kernel implements this ioctl
>>> already.
>>
>> Couldn't this be done with Gavin's vfio_pci_container_ioctl()? Thanks,
>
>
>Good point, I missed that. I'll merge two helpers into one and repost, then
>Gavin will use it.
>
Sure, I'll rebase my code on top of Alexey's. But Alex raised more comments
about the function. I just copy & paste so that we don't miss the comments:
- "fd == 0" is valid
- In addition to fd 0 being valid, there's some white space issues here.
Passing an integer option is not very extensible, maybe a void* that
gets cast to an int* for VFIO_EEH_PE_OP would be better. It's a qemu
internal API though, so I'm not going to sweat saving that problem for
the next user. Thanks,
Thanks,
Gavin
>>
>> Alex
>>
>>
>>> Signed-off-by: Alexey Kardashevskiy <address@hidden>
>>> ---
>>> Changes:
>>> v7:
>>> * do not return a group fd from the helper
>>>
>>> v6:
>>> * added dup() to protect group_fd from accidental disposal
>>>
>>> v5:
>>> * reworked to reflect change in vfio_get_group() from one
>>> of previous patches change
>>>
>>> v4:
>>> * fixed possible leaks on error paths
>>> ---
>>> hw/misc/vfio.c | 36 ++++++++++++++++++++++++++++++++++++
>>> include/hw/misc/vfio.h | 11 +++++++++++
>>> 2 files changed, 47 insertions(+)
>>> create mode 100644 include/hw/misc/vfio.h
>>>
>>> diff --git a/hw/misc/vfio.c b/hw/misc/vfio.c
>>> index 7437c2e..99141f3 100644
>>> --- a/hw/misc/vfio.c
>>> +++ b/hw/misc/vfio.c
>>> @@ -39,6 +39,7 @@
>>> #include "qemu/range.h"
>>> #include "sysemu/kvm.h"
>>> #include "sysemu/sysemu.h"
>>> +#include "hw/misc/vfio.h"
>>>
>>> /* #define DEBUG_VFIO */
>>> #ifdef DEBUG_VFIO
>>> @@ -4318,3 +4319,38 @@ static void register_vfio_pci_dev_type(void)
>>> }
>>>
>>> type_init(register_vfio_pci_dev_type)
>>> +
>>> +int vfio_container_spapr_get_info(AddressSpace *as,
>>> + int32_t groupid,
>>> + struct vfio_iommu_spapr_tce_info *info)
>>> +{
>>> + VFIOGroup *group;
>>> + VFIOContainer *container;
>>> + int ret, fd;
>>> +
>>> + group = vfio_get_group(groupid, as);
>>> + if (!group) {
>>> + return -1;
>>> + }
>>> + container = group->container;
>>> + if (!group->container) {
>>> + goto put_group_exit;
>>> + }
>>> + fd = container->fd;
>>> + if (!ioctl(fd, VFIO_CHECK_EXTENSION, VFIO_SPAPR_TCE_IOMMU)) {
>>> + goto put_group_exit;
>>> + }
>>> + ret = ioctl(fd, VFIO_IOMMU_SPAPR_TCE_GET_INFO, info);
>>> + if (ret) {
>>> + error_report("vfio: failed to get iommu info for container: %s",
>>> + strerror(errno));
>>> + goto put_group_exit;
>>> + }
>>> +
>>> + return 0;
>>> +
>>> +put_group_exit:
>>> + vfio_put_group(group);
>>> +
>>> + return -1;
>>> +}
>>> diff --git a/include/hw/misc/vfio.h b/include/hw/misc/vfio.h
>>> new file mode 100644
>>> index 0000000..e82f5a3
>>> --- /dev/null
>>> +++ b/include/hw/misc/vfio.h
>>> @@ -0,0 +1,11 @@
>>> +#ifndef VFIO_API_H
>>> +#define VFIO_API_H
>>> +
>>> +#include "qemu/typedefs.h"
>>> +#include <linux/vfio.h>
>>> +
>>> +extern int vfio_container_spapr_get_info(AddressSpace *as,
>>> + int32_t groupid,
>>> + struct vfio_iommu_spapr_tce_info
>>> *info);
>>> +
>>> +#endif
>>
>>
>>
>
>
>--
>Alexey
>
- Re: [Qemu-ppc] [PATCH v7 1/4] spapr_iommu: Make in-kernel TCE table optional, (continued)
- Re: [Qemu-ppc] [PATCH v7 1/4] spapr_iommu: Make in-kernel TCE table optional, Alexander Graf, 2014/06/05
- Re: [Qemu-ppc] [PATCH v7 1/4] spapr_iommu: Make in-kernel TCE table optional, Alexey Kardashevskiy, 2014/06/05
- Re: [Qemu-ppc] [PATCH v7 1/4] spapr_iommu: Make in-kernel TCE table optional, Alexander Graf, 2014/06/05
- Re: [Qemu-ppc] [PATCH v7 1/4] spapr_iommu: Make in-kernel TCE table optional, Alexey Kardashevskiy, 2014/06/05
- Re: [Qemu-ppc] [PATCH v7 1/4] spapr_iommu: Make in-kernel TCE table optional, Alexander Graf, 2014/06/05
- Re: [Qemu-ppc] [PATCH v7 1/4] spapr_iommu: Make in-kernel TCE table optional, Alexey Kardashevskiy, 2014/06/05
- Re: [Qemu-ppc] [PATCH v7 1/4] spapr_iommu: Make in-kernel TCE table optional, Benjamin Herrenschmidt, 2014/06/05
[Qemu-ppc] [PATCH v7 2/4] vfio: Add vfio_container_spapr_get_info(), Alexey Kardashevskiy, 2014/06/05