Re: [Qemu-ppc] [PATCH 07/12] spapr_pci: Fold spapr_phb_vfio_eeh_set_option() into spapr_pci code

[Alexey Kardashevskiy]

On 02/26/2016 10:31 PM, David Gibson wrote:
> Simplify the sPAPR PCI code by folding spapr_phb_eeh_set_option() into
> rtas_ibm_set_eeh_option().
>
> Signed-off-by: David Gibson <address@hidden>

Reviewed-by: Alexey Kardashevskiy <address@hidden>

> ---
>   hw/ppc/spapr_pci.c          | 43 +++++++++++++++++++++++++++++++++++++++--
>   hw/ppc/spapr_pci_vfio.c     | 47 ---------------------------------------------
>   include/hw/pci-host/spapr.h |  4 ----
>   3 files changed, 41 insertions(+), 53 deletions(-)
>
> diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
> index eaae7e2..26d08ad 100644
> --- a/hw/ppc/spapr_pci.c
> +++ b/hw/ppc/spapr_pci.c
> @@ -450,6 +450,7 @@ static void rtas_ibm_set_eeh_option(PowerPCCPU *cpu,
>       sPAPRPHBState *sphb;
>       uint32_t addr, option;
>       uint64_t buid;
> +    uint32_t op;
>       int ret;
>
>       if ((nargs != 4) || (nret != 1)) {
> @@ -469,8 +470,46 @@ static void rtas_ibm_set_eeh_option(PowerPCCPU *cpu,
>           goto param_error_exit;
>       }
>
> -    ret = spapr_phb_vfio_eeh_set_option(sphb, addr, option);
> -    rtas_st(rets, 0, ret);
> +    switch (option) {
> +    case RTAS_EEH_DISABLE:
> +        op = VFIO_EEH_PE_DISABLE;
> +        break;
> +    case RTAS_EEH_ENABLE: {
> +        PCIHostState *phb;
> +        PCIDevice *pdev;
> +
> +        /*
> +         * The EEH functionality is enabled on basis of PCI device,
> +         * instead of PE. We need check the validity of the PCI
> +         * device address.
> +         */
> +        phb = PCI_HOST_BRIDGE(sphb);
> +        pdev = pci_find_device(phb->bus,
> +                               (addr >> 16) & 0xFF, (addr >> 8) & 0xFF);
> +        if (!pdev || !object_dynamic_cast(OBJECT(pdev), "vfio-pci")) {
> +            goto param_error_exit;
> +        }
> +
> +        op = VFIO_EEH_PE_ENABLE;
> +        break;
> +    }
> +    case RTAS_EEH_THAW_IO:
> +        op = VFIO_EEH_PE_UNFREEZE_IO;
> +        break;
> +    case RTAS_EEH_THAW_DMA:
> +        op = VFIO_EEH_PE_UNFREEZE_DMA;
> +        break;
> +    default:
> +        goto param_error_exit;
> +    }
> +
> +    ret = vfio_eeh_as_op(&sphb->iommu_as, op);
> +    if (ret < 0) {
> +        rtas_st(rets, 0, RTAS_OUT_HW_ERROR);
> +        return;
> +    }
> +
> +    rtas_st(rets, 0, RTAS_OUT_SUCCESS);
>       return;
>
>   param_error_exit:
> diff --git a/hw/ppc/spapr_pci_vfio.c b/hw/ppc/spapr_pci_vfio.c
> index c87f2e4..cccd444 100644
> --- a/hw/ppc/spapr_pci_vfio.c
> +++ b/hw/ppc/spapr_pci_vfio.c
> @@ -89,53 +89,6 @@ void spapr_phb_vfio_reset(DeviceState *qdev)
>       spapr_phb_vfio_eeh_reenable(SPAPR_PCI_HOST_BRIDGE(qdev));
>   }
>
> -int spapr_phb_vfio_eeh_set_option(sPAPRPHBState *sphb,
> -                                  unsigned int addr, int option)
> -{
> -    uint32_t op;
> -    int ret;
> -
> -    switch (option) {
> -    case RTAS_EEH_DISABLE:
> -        op = VFIO_EEH_PE_DISABLE;
> -        break;
> -    case RTAS_EEH_ENABLE: {
> -        PCIHostState *phb;
> -        PCIDevice *pdev;
> -
> -        /*
> -         * The EEH functionality is enabled on basis of PCI device,
> -         * instead of PE. We need check the validity of the PCI
> -         * device address.
> -         */
> -        phb = PCI_HOST_BRIDGE(sphb);
> -        pdev = pci_find_device(phb->bus,
> -                               (addr >> 16) & 0xFF, (addr >> 8) & 0xFF);
> -        if (!pdev || !object_dynamic_cast(OBJECT(pdev), "vfio-pci")) {
> -            return RTAS_OUT_PARAM_ERROR;
> -        }
> -
> -        op = VFIO_EEH_PE_ENABLE;
> -        break;
> -    }
> -    case RTAS_EEH_THAW_IO:
> -        op = VFIO_EEH_PE_UNFREEZE_IO;
> -        break;
> -    case RTAS_EEH_THAW_DMA:
> -        op = VFIO_EEH_PE_UNFREEZE_DMA;
> -        break;
> -    default:
> -        return RTAS_OUT_PARAM_ERROR;
> -    }
> -
> -    ret = vfio_eeh_as_op(&sphb->iommu_as, op);
> -    if (ret < 0) {
> -        return RTAS_OUT_HW_ERROR;
> -    }
> -
> -    return RTAS_OUT_SUCCESS;
> -}
> -
>   static void spapr_phb_vfio_class_init(ObjectClass *klass, void *data)
>   {
>       DeviceClass *dc = DEVICE_CLASS(klass);
> diff --git a/include/hw/pci-host/spapr.h b/include/hw/pci-host/spapr.h
> index 55237fc..d32750e 100644
> --- a/include/hw/pci-host/spapr.h
> +++ b/include/hw/pci-host/spapr.h
> @@ -135,8 +135,4 @@ PCIDevice *spapr_pci_find_dev(sPAPRMachineState *spapr, 
> uint64_t buid,
>                                 uint32_t config_addr);
>   void spapr_phb_vfio_reset(DeviceState *qdev);
>
> -/* VFIO EEH hooks */
> -int spapr_phb_vfio_eeh_set_option(sPAPRPHBState *sphb,
> -                                  unsigned int addr, int option);
> -
>   #endif /* __HW_SPAPR_PCI_H__ */


--
Alexey