[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-ppc] [PULL 8/8] xics: report errors with the QEMU Error API
From: |
David Gibson |
Subject: |
[Qemu-ppc] [PULL 8/8] xics: report errors with the QEMU Error API |
Date: |
Mon, 29 Feb 2016 17:58:31 +1100 |
From: Greg Kurz <address@hidden>
Using the return value to report errors is error prone:
- xics_alloc() returns -1 on error but spapr_vio_busdev_realize() errors
on 0
- xics_alloc_block() returns the unclear value of ics->offset - 1 on error
but both rtas_ibm_change_msi() and spapr_phb_realize() error on 0
This patch adds an errp argument to xics_alloc() and xics_alloc_block() to
report errors. The return value of these functions is a valid IRQ number
if errp is NULL. It is undefined otherwise.
The corresponding error traces get promotted to error messages. Note that
the "can't allocate IRQ" error message in spapr_vio_busdev_realize() also
moves to xics_alloc(). Similar error message consolidation isn't really
applicable to xics_alloc_block() because callers have extra context (device
config address, MSI or MSIX).
This fixes the issues mentioned above.
Based on previous work from Brian W. Hart.
Signed-off-by: Greg Kurz <address@hidden>
Signed-off-by: David Gibson <address@hidden>
---
hw/intc/xics.c | 13 +++++++++----
hw/ppc/spapr_events.c | 3 ++-
hw/ppc/spapr_pci.c | 16 ++++++++++------
hw/ppc/spapr_vio.c | 7 ++++---
include/hw/ppc/xics.h | 5 +++--
trace-events | 2 --
6 files changed, 28 insertions(+), 18 deletions(-)
diff --git a/hw/intc/xics.c b/hw/intc/xics.c
index e66ae32..213a370 100644
--- a/hw/intc/xics.c
+++ b/hw/intc/xics.c
@@ -712,7 +712,7 @@ static int ics_find_free_block(ICSState *ics, int num, int
alignnum)
return -1;
}
-int xics_alloc(XICSState *icp, int src, int irq_hint, bool lsi)
+int xics_alloc(XICSState *icp, int src, int irq_hint, bool lsi, Error **errp)
{
ICSState *ics = &icp->ics[src];
int irq;
@@ -720,14 +720,14 @@ int xics_alloc(XICSState *icp, int src, int irq_hint,
bool lsi)
if (irq_hint) {
assert(src == xics_find_source(icp, irq_hint));
if (!ICS_IRQ_FREE(ics, irq_hint - ics->offset)) {
- trace_xics_alloc_failed_hint(src, irq_hint);
+ error_setg(errp, "can't allocate IRQ %d: already in use",
irq_hint);
return -1;
}
irq = irq_hint;
} else {
irq = ics_find_free_block(ics, 1, 1);
if (irq < 0) {
- trace_xics_alloc_failed_no_left(src);
+ error_setg(errp, "can't allocate IRQ: no IRQ left");
return -1;
}
irq += ics->offset;
@@ -743,7 +743,8 @@ int xics_alloc(XICSState *icp, int src, int irq_hint, bool
lsi)
* Allocate block of consecutive IRQs, and return the number of the first IRQ
in the block.
* If align==true, aligns the first IRQ number to num.
*/
-int xics_alloc_block(XICSState *icp, int src, int num, bool lsi, bool align)
+int xics_alloc_block(XICSState *icp, int src, int num, bool lsi, bool align,
+ Error **errp)
{
int i, first = -1;
ICSState *ics = &icp->ics[src];
@@ -763,6 +764,10 @@ int xics_alloc_block(XICSState *icp, int src, int num,
bool lsi, bool align)
} else {
first = ics_find_free_block(ics, num, 1);
}
+ if (first < 0) {
+ error_setg(errp, "can't find a free %d-IRQ block", num);
+ return -1;
+ }
if (first >= 0) {
for (i = first; i < first + num; ++i) {
diff --git a/hw/ppc/spapr_events.c b/hw/ppc/spapr_events.c
index f5eac4b..39f4682 100644
--- a/hw/ppc/spapr_events.c
+++ b/hw/ppc/spapr_events.c
@@ -588,7 +588,8 @@ out_no_events:
void spapr_events_init(sPAPRMachineState *spapr)
{
QTAILQ_INIT(&spapr->pending_events);
- spapr->check_exception_irq = xics_alloc(spapr->icp, 0, 0, false);
+ spapr->check_exception_irq = xics_alloc(spapr->icp, 0, 0, false,
+ &error_fatal);
spapr->epow_notifier.notify = spapr_powerdown_req;
qemu_register_powerdown_notifier(&spapr->epow_notifier);
spapr_rtas_register(RTAS_CHECK_EXCEPTION, "check-exception",
diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index 9b2b546..e8edad3 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -280,6 +280,7 @@ static void rtas_ibm_change_msi(PowerPCCPU *cpu,
sPAPRMachineState *spapr,
PCIDevice *pdev = NULL;
spapr_pci_msi *msi;
int *config_addr_key;
+ Error *err = NULL;
switch (func) {
case RTAS_CHANGE_MSI_FN:
@@ -354,9 +355,10 @@ static void rtas_ibm_change_msi(PowerPCCPU *cpu,
sPAPRMachineState *spapr,
/* Allocate MSIs */
irq = xics_alloc_block(spapr->icp, 0, req_num, false,
- ret_intr_type == RTAS_TYPE_MSI);
- if (!irq) {
- error_report("Cannot allocate MSIs for device %x", config_addr);
+ ret_intr_type == RTAS_TYPE_MSI, &err);
+ if (err) {
+ error_reportf_err(err, "Can't allocate MSIs for device %x: ",
+ config_addr);
rtas_st(rets, 0, RTAS_OUT_HW_ERROR);
return;
}
@@ -1367,10 +1369,12 @@ static void spapr_phb_realize(DeviceState *dev, Error
**errp)
/* Initialize the LSI table */
for (i = 0; i < PCI_NUM_PINS; i++) {
uint32_t irq;
+ Error *local_err = NULL;
- irq = xics_alloc_block(spapr->icp, 0, 1, true, false);
- if (!irq) {
- error_setg(errp, "spapr_allocate_lsi failed");
+ irq = xics_alloc_block(spapr->icp, 0, 1, true, false, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ error_prepend(errp, "can't allocate LSIs: ");
return;
}
diff --git a/hw/ppc/spapr_vio.c b/hw/ppc/spapr_vio.c
index ac6666a..0f61a55 100644
--- a/hw/ppc/spapr_vio.c
+++ b/hw/ppc/spapr_vio.c
@@ -431,6 +431,7 @@ static void spapr_vio_busdev_realize(DeviceState *qdev,
Error **errp)
VIOsPAPRDevice *dev = (VIOsPAPRDevice *)qdev;
VIOsPAPRDeviceClass *pc = VIO_SPAPR_DEVICE_GET_CLASS(dev);
char *id;
+ Error *local_err = NULL;
if (dev->reg != -1) {
/*
@@ -463,9 +464,9 @@ static void spapr_vio_busdev_realize(DeviceState *qdev,
Error **errp)
dev->qdev.id = id;
}
- dev->irq = xics_alloc(spapr->icp, 0, dev->irq, false);
- if (!dev->irq) {
- error_setg(errp, "can't allocate IRQ");
+ dev->irq = xics_alloc(spapr->icp, 0, dev->irq, false, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
return;
}
diff --git a/include/hw/ppc/xics.h b/include/hw/ppc/xics.h
index 355a966..f60b06a 100644
--- a/include/hw/ppc/xics.h
+++ b/include/hw/ppc/xics.h
@@ -161,8 +161,9 @@ struct ICSIRQState {
qemu_irq xics_get_qirq(XICSState *icp, int irq);
void xics_set_irq_type(XICSState *icp, int irq, bool lsi);
-int xics_alloc(XICSState *icp, int src, int irq_hint, bool lsi);
-int xics_alloc_block(XICSState *icp, int src, int num, bool lsi, bool align);
+int xics_alloc(XICSState *icp, int src, int irq_hint, bool lsi, Error **errp);
+int xics_alloc_block(XICSState *icp, int src, int num, bool lsi, bool align,
+ Error **errp);
void xics_free(XICSState *icp, int irq, int num);
void xics_cpu_setup(XICSState *icp, PowerPCCPU *cpu);
diff --git a/trace-events b/trace-events
index 61a133f..075ec27 100644
--- a/trace-events
+++ b/trace-events
@@ -1409,8 +1409,6 @@ xics_ics_write_xive(int nr, int srcno, int server,
uint8_t priority) "ics_write_
xics_ics_reject(int nr, int srcno) "reject irq %#x [src %d]"
xics_ics_eoi(int nr) "ics_eoi: irq %#x"
xics_alloc(int src, int irq) "source#%d, irq %d"
-xics_alloc_failed_hint(int src, int irq) "source#%d, irq %d is already in use"
-xics_alloc_failed_no_left(int src) "source#%d, no irq left"
xics_alloc_block(int src, int first, int num, bool lsi, int align) "source#%d,
first irq %d, %d irqs, lsi=%d, alignnum %d"
xics_ics_free(int src, int irq, int num) "Source#%d, first irq %d, %d irqs"
xics_ics_free_warn(int src, int irq) "Source#%d, irq %d is already free"
--
2.5.0
- [Qemu-ppc] [PULL 0/8] ppc-for-2.6 queue 20160229, David Gibson, 2016/02/29
- [Qemu-ppc] [PULL 1/8] spapr_rng: disable hotpluggability, David Gibson, 2016/02/29
- [Qemu-ppc] [PULL 4/8] spapr: disable vmdesc submission for old machines, David Gibson, 2016/02/29
- [Qemu-ppc] [PULL 7/8] migration: allow machine to enforce configuration section migration, David Gibson, 2016/02/29
- [Qemu-ppc] [PULL 3/8] spapr_pci: fix irq leak in RTAS ibm, change-msi, David Gibson, 2016/02/29
- [Qemu-ppc] [PULL 8/8] xics: report errors with the QEMU Error API,
David Gibson <=
- [Qemu-ppc] [PULL 2/8] spapr_pci: kill useless variable in rtas_ibm_change_msi(), David Gibson, 2016/02/29
- [Qemu-ppc] [PULL 5/8] dbdma: warn when using unassigned channel, David Gibson, 2016/02/29
- [Qemu-ppc] [PULL 6/8] spapr: skip configuration section during migration of older machines, David Gibson, 2016/02/29
- Re: [Qemu-ppc] [PULL 0/8] ppc-for-2.6 queue 20160229, Peter Maydell, 2016/02/29