[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-ppc] [PULL 29/73] ppc/pnv: add XSCOM infrastructure
From: |
David Gibson |
Subject: |
[Qemu-ppc] [PULL 29/73] ppc/pnv: add XSCOM infrastructure |
Date: |
Fri, 28 Oct 2016 12:37:30 +1100 |
From: Cédric Le Goater <address@hidden>
On a real POWER8 system, the Pervasive Interconnect Bus (PIB) serves
as a backbone to connect different units of the system. The host
firmware connects to the PIB through a bridge unit, the
Alter-Display-Unit (ADU), which gives him access to all the chiplets
on the PCB network (Pervasive Connect Bus), the PIB acting as the root
of this network.
XSCOM (serial communication) is the interface to the sideband bus
provided by the POWER8 pervasive unit to read and write to chiplets
resources. This is needed by the host firmware, OPAL and to a lesser
extent, Linux. This is among others how the PCI Host bridges get
configured at boot or how the LPC bus is accessed.
To represent the ADU of a real system, we introduce a specific
AddressSpace to dispatch XSCOM accesses to the targeted chiplets. The
translation of an XSCOM address into a PCB register address is
slightly different between the P9 and the P8. This is handled before
the dispatch using a 8byte alignment for all.
To customize the device tree, a QOM InterfaceClass, PnvXScomInterface,
is provided with a populate() handler. The chip populates the device
tree by simply looping on its children. Therefore, each model needing
custom nodes should not forget to declare itself as a child at
instantiation time.
Based on previous work done by :
Benjamin Herrenschmidt <address@hidden>
Signed-off-by: Cédric Le Goater <address@hidden>
[dwg: Added cpu parameter to xscom_complete()]
Signed-off-by: David Gibson <address@hidden>
---
hw/ppc/Makefile.objs | 2 +-
hw/ppc/pnv.c | 25 +++++
hw/ppc/pnv_xscom.c | 275 +++++++++++++++++++++++++++++++++++++++++++++
include/hw/ppc/pnv.h | 15 +++
include/hw/ppc/pnv_xscom.h | 56 +++++++++
5 files changed, 372 insertions(+), 1 deletion(-)
create mode 100644 hw/ppc/pnv_xscom.c
create mode 100644 include/hw/ppc/pnv_xscom.h
diff --git a/hw/ppc/Makefile.objs b/hw/ppc/Makefile.objs
index f8c7d1d..08c213c 100644
--- a/hw/ppc/Makefile.objs
+++ b/hw/ppc/Makefile.objs
@@ -6,7 +6,7 @@ obj-$(CONFIG_PSERIES) += spapr_hcall.o spapr_iommu.o
spapr_rtas.o
obj-$(CONFIG_PSERIES) += spapr_pci.o spapr_rtc.o spapr_drc.o spapr_rng.o
obj-$(CONFIG_PSERIES) += spapr_cpu_core.o
# IBM PowerNV
-obj-$(CONFIG_POWERNV) += pnv.o pnv_core.o
+obj-$(CONFIG_POWERNV) += pnv.o pnv_xscom.o pnv_core.o
ifeq ($(CONFIG_PCI)$(CONFIG_PSERIES)$(CONFIG_LINUX), yyy)
obj-y += spapr_pci_vfio.o
endif
diff --git a/hw/ppc/pnv.c b/hw/ppc/pnv.c
index 3413107..96ba36c 100644
--- a/hw/ppc/pnv.c
+++ b/hw/ppc/pnv.c
@@ -33,6 +33,8 @@
#include "qemu/cutils.h"
#include "qapi/visitor.h"
+#include "hw/ppc/pnv_xscom.h"
+
#include <libfdt.h>
#define FDT_MAX_SIZE 0x00100000
@@ -219,6 +221,8 @@ static void powernv_populate_chip(PnvChip *chip, void *fdt)
size_t typesize = object_type_get_instance_size(typename);
int i;
+ pnv_xscom_populate(chip, fdt, 0);
+
for (i = 0; i < chip->nr_cores; i++) {
PnvCore *pnv_core = PNV_CORE(chip->cores + i * typesize);
@@ -455,6 +459,7 @@ static void pnv_chip_power8e_class_init(ObjectClass *klass,
void *data)
k->chip_cfam_id = 0x221ef04980000000ull; /* P8 Murano DD2.1 */
k->cores_mask = POWER8E_CORE_MASK;
k->core_pir = pnv_chip_core_pir_p8;
+ k->xscom_base = 0x003fc0000000000ull;
dc->desc = "PowerNV Chip POWER8E";
}
@@ -475,6 +480,7 @@ static void pnv_chip_power8_class_init(ObjectClass *klass,
void *data)
k->chip_cfam_id = 0x220ea04980000000ull; /* P8 Venice DD2.0 */
k->cores_mask = POWER8_CORE_MASK;
k->core_pir = pnv_chip_core_pir_p8;
+ k->xscom_base = 0x003fc0000000000ull;
dc->desc = "PowerNV Chip POWER8";
}
@@ -495,6 +501,7 @@ static void pnv_chip_power8nvl_class_init(ObjectClass
*klass, void *data)
k->chip_cfam_id = 0x120d304980000000ull; /* P8 Naples DD1.0 */
k->cores_mask = POWER8_CORE_MASK;
k->core_pir = pnv_chip_core_pir_p8;
+ k->xscom_base = 0x003fc0000000000ull;
dc->desc = "PowerNV Chip POWER8NVL";
}
@@ -515,6 +522,7 @@ static void pnv_chip_power9_class_init(ObjectClass *klass,
void *data)
k->chip_cfam_id = 0x100d104980000000ull; /* P9 Nimbus DD1.0 */
k->cores_mask = POWER9_CORE_MASK;
k->core_pir = pnv_chip_core_pir_p9;
+ k->xscom_base = 0x00603fc00000000ull;
dc->desc = "PowerNV Chip POWER9";
}
@@ -555,6 +563,14 @@ static void pnv_chip_core_sanitize(PnvChip *chip, Error
**errp)
}
}
+static void pnv_chip_init(Object *obj)
+{
+ PnvChip *chip = PNV_CHIP(obj);
+ PnvChipClass *pcc = PNV_CHIP_GET_CLASS(chip);
+
+ chip->xscom_base = pcc->xscom_base;
+}
+
static void pnv_chip_realize(DeviceState *dev, Error **errp)
{
PnvChip *chip = PNV_CHIP(dev);
@@ -569,6 +585,14 @@ static void pnv_chip_realize(DeviceState *dev, Error
**errp)
return;
}
+ /* XSCOM bridge */
+ pnv_xscom_realize(chip, &error);
+ if (error) {
+ error_propagate(errp, error);
+ return;
+ }
+ sysbus_mmio_map(SYS_BUS_DEVICE(chip), 0, PNV_XSCOM_BASE(chip));
+
/* Cores */
pnv_chip_core_sanitize(chip, &error);
if (error) {
@@ -628,6 +652,7 @@ static const TypeInfo pnv_chip_info = {
.name = TYPE_PNV_CHIP,
.parent = TYPE_SYS_BUS_DEVICE,
.class_init = pnv_chip_class_init,
+ .instance_init = pnv_chip_init,
.class_size = sizeof(PnvChipClass),
.abstract = true,
};
diff --git a/hw/ppc/pnv_xscom.c b/hw/ppc/pnv_xscom.c
new file mode 100644
index 0000000..5aaa264
--- /dev/null
+++ b/hw/ppc/pnv_xscom.c
@@ -0,0 +1,275 @@
+/*
+ * QEMU PowerPC PowerNV XSCOM bus
+ *
+ * Copyright (c) 2016, IBM Corporation.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ */
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/hw.h"
+#include "qemu/log.h"
+#include "sysemu/kvm.h"
+#include "target-ppc/cpu.h"
+#include "hw/sysbus.h"
+
+#include "hw/ppc/fdt.h"
+#include "hw/ppc/pnv_xscom.h"
+#include "hw/ppc/pnv.h"
+
+#include <libfdt.h>
+
+static void xscom_complete(CPUState *cs, uint64_t hmer_bits)
+{
+ /*
+ * TODO: When the read/write comes from the monitor, NULL is
+ * passed for the cpu, and no CPU completion is generated.
+ */
+ if (cs) {
+ PowerPCCPU *cpu = POWERPC_CPU(cs);
+ CPUPPCState *env = &cpu->env;
+
+ /*
+ * TODO: Need a CPU helper to set HMER, also handle generation
+ * of HMIs
+ */
+ cpu_synchronize_state(cs);
+ env->spr[SPR_HMER] |= hmer_bits;
+ }
+}
+
+static uint32_t pnv_xscom_pcba(PnvChip *chip, uint64_t addr)
+{
+ PnvChipClass *pcc = PNV_CHIP_GET_CLASS(chip);
+
+ addr &= (PNV_XSCOM_SIZE - 1);
+ if (pcc->chip_type == PNV_CHIP_POWER9) {
+ return addr >> 3;
+ } else {
+ return ((addr >> 4) & ~0xfull) | ((addr >> 3) & 0xf);
+ }
+}
+
+static uint64_t xscom_read_default(PnvChip *chip, uint32_t pcba)
+{
+ switch (pcba) {
+ case 0xf000f:
+ return PNV_CHIP_GET_CLASS(chip)->chip_cfam_id;
+ case 0x1010c00: /* PIBAM FIR */
+ case 0x1010c03: /* PIBAM FIR MASK */
+ case 0x2020007: /* ADU stuff */
+ case 0x2020009: /* ADU stuff */
+ case 0x202000f: /* ADU stuff */
+ return 0;
+ case 0x2013f00: /* PBA stuff */
+ case 0x2013f01: /* PBA stuff */
+ case 0x2013f02: /* PBA stuff */
+ case 0x2013f03: /* PBA stuff */
+ case 0x2013f04: /* PBA stuff */
+ case 0x2013f05: /* PBA stuff */
+ case 0x2013f06: /* PBA stuff */
+ case 0x2013f07: /* PBA stuff */
+ return 0;
+ case 0x2013028: /* CAPP stuff */
+ case 0x201302a: /* CAPP stuff */
+ case 0x2013801: /* CAPP stuff */
+ case 0x2013802: /* CAPP stuff */
+ return 0;
+ default:
+ return -1;
+ }
+}
+
+static bool xscom_write_default(PnvChip *chip, uint32_t pcba, uint64_t val)
+{
+ /* We ignore writes to these */
+ switch (pcba) {
+ case 0xf000f: /* chip id is RO */
+ case 0x1010c00: /* PIBAM FIR */
+ case 0x1010c01: /* PIBAM FIR */
+ case 0x1010c02: /* PIBAM FIR */
+ case 0x1010c03: /* PIBAM FIR MASK */
+ case 0x1010c04: /* PIBAM FIR MASK */
+ case 0x1010c05: /* PIBAM FIR MASK */
+ case 0x2020007: /* ADU stuff */
+ case 0x2020009: /* ADU stuff */
+ case 0x202000f: /* ADU stuff */
+ return true;
+ default:
+ return false;
+ }
+}
+
+static uint64_t xscom_read(void *opaque, hwaddr addr, unsigned width)
+{
+ PnvChip *chip = opaque;
+ uint32_t pcba = pnv_xscom_pcba(chip, addr);
+ uint64_t val = 0;
+ MemTxResult result;
+
+ /* Handle some SCOMs here before dispatch */
+ val = xscom_read_default(chip, pcba);
+ if (val != -1) {
+ goto complete;
+ }
+
+ val = address_space_ldq(&chip->xscom_as, pcba << 3, MEMTXATTRS_UNSPECIFIED,
+ &result);
+ if (result != MEMTX_OK) {
+ qemu_log_mask(LOG_GUEST_ERROR, "XSCOM read failed at @0x%"
+ HWADDR_PRIx " pcba=0x%08x\n", addr, pcba);
+ xscom_complete(current_cpu, HMER_XSCOM_FAIL | HMER_XSCOM_DONE);
+ return 0;
+ }
+
+complete:
+ xscom_complete(current_cpu, HMER_XSCOM_DONE);
+ return val;
+}
+
+static void xscom_write(void *opaque, hwaddr addr, uint64_t val,
+ unsigned width)
+{
+ PnvChip *chip = opaque;
+ uint32_t pcba = pnv_xscom_pcba(chip, addr);
+ MemTxResult result;
+
+ /* Handle some SCOMs here before dispatch */
+ if (xscom_write_default(chip, pcba, val)) {
+ goto complete;
+ }
+
+ address_space_stq(&chip->xscom_as, pcba << 3, val, MEMTXATTRS_UNSPECIFIED,
+ &result);
+ if (result != MEMTX_OK) {
+ qemu_log_mask(LOG_GUEST_ERROR, "XSCOM write failed at @0x%"
+ HWADDR_PRIx " pcba=0x%08x data=0x%" PRIx64 "\n",
+ addr, pcba, val);
+ xscom_complete(current_cpu, HMER_XSCOM_FAIL | HMER_XSCOM_DONE);
+ return;
+ }
+
+complete:
+ xscom_complete(current_cpu, HMER_XSCOM_DONE);
+}
+
+const MemoryRegionOps pnv_xscom_ops = {
+ .read = xscom_read,
+ .write = xscom_write,
+ .valid.min_access_size = 8,
+ .valid.max_access_size = 8,
+ .impl.min_access_size = 8,
+ .impl.max_access_size = 8,
+ .endianness = DEVICE_BIG_ENDIAN,
+};
+
+void pnv_xscom_realize(PnvChip *chip, Error **errp)
+{
+ SysBusDevice *sbd = SYS_BUS_DEVICE(chip);
+ char *name;
+
+ name = g_strdup_printf("xscom-%x", chip->chip_id);
+ memory_region_init_io(&chip->xscom_mmio, OBJECT(chip), &pnv_xscom_ops,
+ chip, name, PNV_XSCOM_SIZE);
+ sysbus_init_mmio(sbd, &chip->xscom_mmio);
+
+ memory_region_init(&chip->xscom, OBJECT(chip), name, PNV_XSCOM_SIZE);
+ address_space_init(&chip->xscom_as, &chip->xscom, name);
+ g_free(name);
+}
+
+static const TypeInfo pnv_xscom_interface_info = {
+ .name = TYPE_PNV_XSCOM_INTERFACE,
+ .parent = TYPE_INTERFACE,
+ .class_size = sizeof(PnvXScomInterfaceClass),
+};
+
+static void pnv_xscom_register_types(void)
+{
+ type_register_static(&pnv_xscom_interface_info);
+}
+
+type_init(pnv_xscom_register_types)
+
+typedef struct ForeachPopulateArgs {
+ void *fdt;
+ int xscom_offset;
+} ForeachPopulateArgs;
+
+static int xscom_populate_child(Object *child, void *opaque)
+{
+ if (object_dynamic_cast(child, TYPE_PNV_XSCOM_INTERFACE)) {
+ ForeachPopulateArgs *args = opaque;
+ PnvXScomInterface *xd = PNV_XSCOM_INTERFACE(child);
+ PnvXScomInterfaceClass *xc = PNV_XSCOM_INTERFACE_GET_CLASS(xd);
+
+ if (xc->populate) {
+ _FDT((xc->populate(xd, args->fdt, args->xscom_offset)));
+ }
+ }
+ return 0;
+}
+
+static const char compat_p8[] = "ibm,power8-xscom\0ibm,xscom";
+static const char compat_p9[] = "ibm,power9-xscom\0ibm,xscom";
+
+int pnv_xscom_populate(PnvChip *chip, void *fdt, int root_offset)
+{
+ uint64_t reg[] = { cpu_to_be64(PNV_XSCOM_BASE(chip)),
+ cpu_to_be64(PNV_XSCOM_SIZE) };
+ int xscom_offset;
+ ForeachPopulateArgs args;
+ char *name;
+ PnvChipClass *pcc = PNV_CHIP_GET_CLASS(chip);
+
+ name = g_strdup_printf("address@hidden" PRIx64, be64_to_cpu(reg[0]));
+ xscom_offset = fdt_add_subnode(fdt, root_offset, name);
+ _FDT(xscom_offset);
+ g_free(name);
+ _FDT((fdt_setprop_cell(fdt, xscom_offset, "ibm,chip-id", chip->chip_id)));
+ _FDT((fdt_setprop_cell(fdt, xscom_offset, "#address-cells", 1)));
+ _FDT((fdt_setprop_cell(fdt, xscom_offset, "#size-cells", 1)));
+ _FDT((fdt_setprop(fdt, xscom_offset, "reg", reg, sizeof(reg))));
+
+ if (pcc->chip_type == PNV_CHIP_POWER9) {
+ _FDT((fdt_setprop(fdt, xscom_offset, "compatible", compat_p9,
+ sizeof(compat_p9))));
+ } else {
+ _FDT((fdt_setprop(fdt, xscom_offset, "compatible", compat_p8,
+ sizeof(compat_p8))));
+ }
+
+ _FDT((fdt_setprop(fdt, xscom_offset, "scom-controller", NULL, 0)));
+
+ args.fdt = fdt;
+ args.xscom_offset = xscom_offset;
+
+ object_child_foreach(OBJECT(chip), xscom_populate_child, &args);
+ return 0;
+}
+
+void pnv_xscom_add_subregion(PnvChip *chip, hwaddr offset, MemoryRegion *mr)
+{
+ memory_region_add_subregion(&chip->xscom, offset << 3, mr);
+}
+
+void pnv_xscom_region_init(MemoryRegion *mr,
+ struct Object *owner,
+ const MemoryRegionOps *ops,
+ void *opaque,
+ const char *name,
+ uint64_t size)
+{
+ memory_region_init_io(mr, owner, ops, opaque, name, size << 3);
+}
diff --git a/include/hw/ppc/pnv.h b/include/hw/ppc/pnv.h
index cec869c..7db922e 100644
--- a/include/hw/ppc/pnv.h
+++ b/include/hw/ppc/pnv.h
@@ -21,6 +21,7 @@
#include "hw/boards.h"
#include "hw/sysbus.h"
+#include "hw/ppc/pnv_xscom.h"
#define TYPE_PNV_CHIP "powernv-chip"
#define PNV_CHIP(obj) OBJECT_CHECK(PnvChip, (obj), TYPE_PNV_CHIP)
@@ -48,6 +49,11 @@ typedef struct PnvChip {
uint32_t nr_cores;
uint64_t cores_mask;
void *cores;
+
+ hwaddr xscom_base;
+ MemoryRegion xscom_mmio;
+ MemoryRegion xscom;
+ AddressSpace xscom_as;
} PnvChip;
typedef struct PnvChipClass {
@@ -60,6 +66,8 @@ typedef struct PnvChipClass {
uint64_t chip_cfam_id;
uint64_t cores_mask;
+ hwaddr xscom_base;
+
uint32_t (*core_pir)(PnvChip *chip, uint32_t core_id);
} PnvChipClass;
@@ -106,4 +114,11 @@ typedef struct PnvMachineState {
#define PNV_FDT_ADDR 0x01000000
#define PNV_TIMEBASE_FREQ 512000000ULL
+/*
+ * POWER8 MMIO base addresses
+ */
+#define PNV_XSCOM_SIZE 0x800000000ull
+#define PNV_XSCOM_BASE(chip) \
+ (chip->xscom_base + ((uint64_t)(chip)->chip_id) * PNV_XSCOM_SIZE)
+
#endif /* _PPC_PNV_H */
diff --git a/include/hw/ppc/pnv_xscom.h b/include/hw/ppc/pnv_xscom.h
new file mode 100644
index 0000000..ee25ec4
--- /dev/null
+++ b/include/hw/ppc/pnv_xscom.h
@@ -0,0 +1,56 @@
+/*
+ * QEMU PowerPC PowerNV XSCOM bus definitions
+ *
+ * Copyright (c) 2016, IBM Corporation.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _PPC_PNV_XSCOM_H
+#define _PPC_PNV_XSCOM_H
+
+#include "qom/object.h"
+
+typedef struct PnvChip PnvChip;
+
+typedef struct PnvXScomInterface {
+ Object parent;
+} PnvXScomInterface;
+
+#define TYPE_PNV_XSCOM_INTERFACE "pnv-xscom-interface"
+#define PNV_XSCOM_INTERFACE(obj) \
+ OBJECT_CHECK(PnvXScomInterface, (obj), TYPE_PNV_XSCOM_INTERFACE)
+#define PNV_XSCOM_INTERFACE_CLASS(klass) \
+ OBJECT_CLASS_CHECK(PnvXScomInterfaceClass, (klass), \
+ TYPE_PNV_XSCOM_INTERFACE)
+#define PNV_XSCOM_INTERFACE_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(PnvXScomInterfaceClass, (obj), TYPE_PNV_XSCOM_INTERFACE)
+
+typedef struct PnvXScomInterfaceClass {
+ InterfaceClass parent;
+ int (*populate)(PnvXScomInterface *dev, void *fdt, int offset);
+} PnvXScomInterfaceClass;
+
+extern void pnv_xscom_realize(PnvChip *chip, Error **errp);
+extern int pnv_xscom_populate(PnvChip *chip, void *fdt, int offset);
+
+extern void pnv_xscom_add_subregion(PnvChip *chip, hwaddr offset,
+ MemoryRegion *mr);
+extern void pnv_xscom_region_init(MemoryRegion *mr,
+ struct Object *owner,
+ const MemoryRegionOps *ops,
+ void *opaque,
+ const char *name,
+ uint64_t size);
+
+#endif /* _PPC_PNV_XSCOM_H */
--
2.7.4
- [Qemu-ppc] [PULL 38/73] pseries: Consolidate RTAS loading, (continued)
- [Qemu-ppc] [PULL 38/73] pseries: Consolidate RTAS loading, David Gibson, 2016/10/27
- [Qemu-ppc] [PULL 46/73] spapr_ovec: initial implementation of option vector helpers, David Gibson, 2016/10/27
- [Qemu-ppc] [PULL 28/73] ppc/pnv: add a PnvCore object, David Gibson, 2016/10/27
- [Qemu-ppc] [PULL 41/73] pseries: Consolidate construction of /rtas device tree node, David Gibson, 2016/10/27
- [Qemu-ppc] [PULL 44/73] pseries: Consolidate construction of /vdevice device tree node, David Gibson, 2016/10/27
- [Qemu-ppc] [PULL 21/73] ppc: Fix single step with gdb stub, David Gibson, 2016/10/27
- [Qemu-ppc] [PULL 35/73] pseries: Remove rtas_addr and fdt_addr fields from machinestate, David Gibson, 2016/10/27
- [Qemu-ppc] [PULL 42/73] pseries: Move /event-sources construction to spapr_build_fdt(), David Gibson, 2016/10/27
- [Qemu-ppc] [PULL 36/73] pseries: Make spapr_create_fdt_skel() get information from machine state, David Gibson, 2016/10/27
- [Qemu-ppc] [PULL 45/73] pseries: Remove spapr_create_fdt_skel(), David Gibson, 2016/10/27
- [Qemu-ppc] [PULL 29/73] ppc/pnv: add XSCOM infrastructure,
David Gibson <=
- [Qemu-ppc] [PULL 32/73] ppc/pnv: add a ISA bus, David Gibson, 2016/10/27
- [Qemu-ppc] [PULL 30/73] ppc/pnv: add XSCOM handlers to PnvCore, David Gibson, 2016/10/27
- [Qemu-ppc] [PULL 31/73] ppc/pnv: add a LPC controller, David Gibson, 2016/10/27
- [Qemu-ppc] [PULL 39/73] pseries: Move construction of /interrupt-controller fdt node, David Gibson, 2016/10/27
- [Qemu-ppc] [PULL 37/73] pseries: Move adding of fdt reserve map entries, David Gibson, 2016/10/27
- [Qemu-ppc] [PULL 43/73] pseries: Move /hypervisor node construction to fdt_build_fdt(), David Gibson, 2016/10/27
- [Qemu-ppc] [PULL 33/73] target-ppc: add vmul10[u, eu, cu, ecu]q instructions, David Gibson, 2016/10/27
- [Qemu-ppc] [PULL 65/73] target-ppc: add xscmp[eq, gt, ge, ne]dp instructions, David Gibson, 2016/10/27
- [Qemu-ppc] [PULL 55/73] tests: Adjust tco-test to use qpci_legacy_iomap(), David Gibson, 2016/10/27
- [Qemu-ppc] [PULL 71/73] spapr: use count+index for memory hotplug, David Gibson, 2016/10/27